which brand of oil cooler?

OZshifter88 · 07-22-2011, 07:50 PM

Hello everyone just picked up a brand new 2011 Red Nismo couple weeks back, soo far love the car, really cant drive it enough.

Well I have a track weekend coming up in August at Roebling Road and I am very aware of the oil cooler being a requirement, just not sure as to which brand I should be looking at, was hoping too see what most of you guys use. And also what kind of price I should be looking at for the install. Thanks!

daisuke149 · 07-22-2011, 07:51 PM

south florida, tracking i'd get a big one. 34 row.

I'd recommend the z1 oil cooler. Ive had mine over a year with no issues. On a hot track day i didnt break 225.

FL 4Motion · 07-22-2011, 08:04 PM

/\ big +1 on the Z1 oil cooler (see sig). Don't foget to get it w/thermostatic plate.

PS--at Zcon track day this past week, our Z didn't go much over 240 deg. for oil temp.

PS--welcome aboard OP, oh and the Aug Roebling track day you're going to, is it the Flat Out motorsports one? If so, my wife will be there with our Z.

OZshifter88 · 07-22-2011, 09:22 PM

Thank you guys for the advice, and yes the event is the Flatout motorsports event. Looks like its going to be a great turn out. Anyone know a website to get a good price on that Z1 oil cooler?

Mike · 07-22-2011, 09:25 PM

Quote:

Originally Posted by OZshifter88

Thank you guys for the advice, and yes the event is the Flatout motorsports event. Looks like its going to be a great turn out. Anyone know a website to get a good price on that Z1 oil cooler?

you buy it directly from Z1. Z1Motorsports.com - Nissan 300zx, 350Z, 370Z, Infiniti G35, GTR, and G37 Parts and Performance Experts.

Looking forward to meeting you at Roebling!!!!!!!! Its looking like it will be a really fun weekend, plus with you and Juno there, I finally won't be the only 370 at the track.

OZshifter88 · 07-22-2011, 11:02 PM

Ya it should be an absolute blast! I think i might have met you mike actually when I went to road atlanta back in june, I owned the red s2000 was with my father and some other friends.

seungklee · 07-23-2011, 12:56 AM

Don't mean to thread jack or anything, but I am debating between 25row and 34row. I did ask daisuke about the z1 34row oil cooler before. Now my question is, if I get a 34row, I know if the oil is too cold that is not good right? So, what about during Winter? last time I went to Willow Springs track in January, temps there were 24 degrees early in the morning. Will cold situation like that will negatively effect my car because of the cold oil with 34 row cooler? sorry if it's confusing.

FL 4Motion · 07-23-2011, 01:05 AM

Quote:

Originally Posted by seungklee

Don't mean to thread jack or anything, but I am debating between 25row and 34row. I did ask daisuke about the z1 34row oil cooler before. Now my question is, if I get a 34row, I know if the oil is too cold that is not good right? So, what about during Winter? last time I went to Willow Springs track in January, temps there were 24 degrees early in the morning. Will cold situation like that will negatively effect my car because of the cold oil with 34 row cooler? sorry if it's confusing.

/\ just get the thermostatic plate option w/the 34row (honestly for a street/track car, I'd opt for it regardless of cooler size). It basically bypasses the cooler until you hit 180 deg helping to ensure your oil can get up to operating temp during street driving.

As far as whether or not to get the 25 or 35 row. I always say, better to have it and not need it, than need it and not have it.

roplusbee · 07-23-2011, 09:03 AM

So does the 34-row fit in behind the GTM intercooler? That is the burning question for me.....

John@Z1 · 07-23-2011, 09:30 AM

Quote:

Originally Posted by roplusbee

So does the 34-row fit in behind the GTM intercooler? That is the burning question for me.....

Yes!

roplusbee · 07-23-2011, 09:44 AM

Quote:

Originally Posted by John@Z1

Yes!

Good. I'm gonna make that move as soon as I get a grip on whether Zerolift will do my GTM install or if they will transfer the car to GTM for the install......

daisuke149 · 07-23-2011, 10:14 AM

Quote:

Originally Posted by roplusbee

Good. I'm gonna make that move as soon as I get a grip on whether Zerolift will do my GTM install or if they will transfer the car to GTM for the install......

there are other places you can transfer it too which would let me see it and possibly ... drive it?? :-D

OZshifter88 · 07-23-2011, 11:14 AM

Also whats a decent price i should be looking at for an install for one of these?

John@Z1 · 07-23-2011, 12:46 PM

Quote:

Originally Posted by OZshifter88

Also whats a decent price i should be looking at for an install for one of these?

Around $450 for a good clean install.

SPOHN · 07-23-2011, 06:51 PM

Quote:

Originally Posted by seungklee

Don't mean to thread jack or anything, but I am debating between 25row and 34row. I did ask daisuke about the z1 34row oil cooler before. Now my question is, if I get a 34row, I know if the oil is too cold that is not good right? So, what about during Winter? last time I went to Willow Springs track in January, temps there were 24 degrees early in the morning. Will cold situation like that will negatively effect my car because of the cold oil with 34 row cooler? sorry if it's confusing.

I can't really say what it would be like on the track at those temps for you would still be putting hard load on the motor which I would think this would still bring the car to more than safe operating temps. What temps did you run that time?

Anyways check out the link in my sig for a for block plate to use in the winter months and cooler days. Easy and fun to play with adjustment wise to get the right temps for cooler and warmer days. Just remove for the track days and spirted driving.

07-22-2011, 07:50 PM	#1 (permalink)
OZshifter88 Base Member Join Date: Jul 2011 Location: Ocoee Florida Posts: 21 Drives: 2016 White Nismo Rep Power: 13	which brand of oil cooler? Hello everyone just picked up a brand new 2011 Red Nismo couple weeks back, soo far love the car, really cant drive it enough. Well I have a track weekend coming up in August at Roebling Road and I am very aware of the oil cooler being a requirement, just not sure as to which brand I should be looking at, was hoping too see what most of you guys use. And also what kind of price I should be looking at for the install. Thanks!

07-23-2011, 09:03 AM	#9 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	So does the 34-row fit in behind the GTM intercooler? That is the burning question for me..... __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
Oil cooler orientation (Z1 cooler)	BrandonT	Engine & Drivetrain	10	05-23-2011 08:26 AM
STILLEN oil cooler kit + STILLEN power steering cooler = fit?	ZBW39	STILLEN	2	07-02-2010 01:08 PM
Oil Cooler.....Trans Cooler...	kannibul	Engine & Drivetrain	6	12-31-2009 06:32 PM

07-22-2011, 07:51 PM	#2 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	south florida, tracking i'd get a big one. 34 row. I'd recommend the z1 oil cooler. Ive had mine over a year with no issues. On a hot track day i didnt break 225.

07-22-2011, 08:04 PM	#3 (permalink)
FL 4Motion A True Z Fanatic Join Date: Feb 2009 Location: FL Posts: 4,776 Drives: Baby Shark Rep Power: 701615	/\ big +1 on the Z1 oil cooler (see sig). Don't foget to get it w/thermostatic plate. PS--at Zcon track day this past week, our Z didn't go much over 240 deg. for oil temp. PS--welcome aboard OP, oh and the Aug Roebling track day you're going to, is it the Flat Out motorsports one? If so, my wife will be there with our Z.

07-22-2011, 09:22 PM	#4 (permalink)
OZshifter88 Base Member Join Date: Jul 2011 Location: Ocoee Florida Posts: 21 Drives: 2016 White Nismo Rep Power: 13	Thank you guys for the advice, and yes the event is the Flatout motorsports event. Looks like its going to be a great turn out. Anyone know a website to get a good price on that Z1 oil cooler?

07-22-2011, 11:02 PM	#6 (permalink)
OZshifter88 Base Member Join Date: Jul 2011 Location: Ocoee Florida Posts: 21 Drives: 2016 White Nismo Rep Power: 13	Ya it should be an absolute blast! I think i might have met you mike actually when I went to road atlanta back in june, I owned the red s2000 was with my father and some other friends.

07-23-2011, 12:56 AM	#7 (permalink)
seungklee Enthusiast Member Join Date: Oct 2009 Location: SoCal Posts: 291 Drives: you around! Rep Power: 15	Don't mean to thread jack or anything, but I am debating between 25row and 34row. I did ask daisuke about the z1 34row oil cooler before. Now my question is, if I get a 34row, I know if the oil is too cold that is not good right? So, what about during Winter? last time I went to Willow Springs track in January, temps there were 24 degrees early in the morning. Will cold situation like that will negatively effect my car because of the cold oil with 34 row cooler? sorry if it's confusing.

07-23-2011, 11:14 AM	#13 (permalink)
OZshifter88 Base Member Join Date: Jul 2011 Location: Ocoee Florida Posts: 21 Drives: 2016 White Nismo Rep Power: 13	Also whats a decent price i should be looking at for an install for one of these?