Stillen Gen 3 Intake + Nismo - My Install Results

torpedo2k · 03-13-2011, 04:02 PM

I have seen tons of Stillen intake installs but had been looking for nismo specific portions as related to the "plates" on the front bumper structure. Had to do a little minor surgery to get the fitment where I was satisfied.

I didn't remove the full plate on both sides just the portion that connects up with the upper bracket\structure. This led to moving the horn on the right side and strapping the cabling to the center structure. The horn was easy. Take the bracket off of the plate you remove and use the same bolt hole at the top where the plate connected. A hammer and chisel take the rivet out in about three hits and a Dremel cutting wheel will cut the plate like butter in less than a minute. Also had to slightly bend out the outer tabs on the upper support bracket that hold the hood release cable.

Hope this will answer some of the questions that others might have.

All of the pics from the install can be found here:
Nissan 370Z Forum - torpedo2k's Album: Stillen Gen 3 intake - NISMO Install

Plate removed:

New cabling strap location (view from underneath):

New horn location:

Tabs modified:

ScGRaceR · 03-18-2011, 07:07 PM

wow bro nice work repped!!!!

definitionxmk · 03-19-2011, 02:05 PM

Useful indeed!

ryanboy · 03-29-2011, 11:23 PM

nice! how is it working out for you? any issues?

torpedo2k · 03-30-2011, 02:25 PM

Quote:

Originally Posted by ryanboy

nice! how is it working out for you? any issues?

Very well. No issues. Sounds good, feels great.

ryanboy · 03-30-2011, 04:24 PM

thats great! thinking of getting one soon. have you drove it while raining- no moisture/water issues?

torpedo2k · 03-30-2011, 05:55 PM

Quote:

Originally Posted by ryanboy

thats great! thinking of getting one soon. have you drove it while raining- no moisture/water issues?

Nah, you would have to do something really stupid to have water issues. There are lots of comments here about water and after market intakes. Stillen seems to be one of the best.

Nismo_Q · 03-30-2011, 07:27 PM

Hows the gas milage? Notice any decrease after the install?

I remember when I installed CAI on my 350z I lost about 1mpg.

roplusbee · 03-30-2011, 08:18 PM

Quote:

Originally Posted by Nismo_Q

Hows the gas milage? Notice any decrease after the install?

I remember when I installed CAI on my 350z I lost about 1mpg.

That's prolly cause you started hitting it harder after becoming addicted to the sound and extra umph........

Onixt · 03-14-2015, 06:30 PM

How much hp you got from stillen gen 3

brancky3 · 03-14-2015, 06:49 PM

Quote:

Originally Posted by Onixt

How much hp you got from stillen gen 3

Are you going to ask this in every intake thread? Someone responded to your last post, 17.5 hp.

03-13-2011, 04:02 PM	#1 (permalink)
torpedo2k Enthusiast Member Join Date: Dec 2010 Location: Atlanta, Ga Posts: 396 Drives: 370 NISMO Rep Power: 14	Stillen Gen 3 Intake + Nismo - My Install Results I have seen tons of Stillen intake installs but had been looking for nismo specific portions as related to the "plates" on the front bumper structure. Had to do a little minor surgery to get the fitment where I was satisfied. I didn't remove the full plate on both sides just the portion that connects up with the upper bracket\structure. This led to moving the horn on the right side and strapping the cabling to the center structure. The horn was easy. Take the bracket off of the plate you remove and use the same bolt hole at the top where the plate connected. A hammer and chisel take the rivet out in about three hits and a Dremel cutting wheel will cut the plate like butter in less than a minute. Also had to slightly bend out the outer tabs on the upper support bracket that hold the hood release cable. Hope this will answer some of the questions that others might have. All of the pics from the install can be found here: Nissan 370Z Forum - torpedo2k's Album: Stillen Gen 3 intake - NISMO Install Plate removed: New cabling strap location (view from underneath): New horn location: Tabs modified: Brad370, tim414, Kamillio and 1 others like this.

03-18-2011, 07:07 PM	#2 (permalink)
ScGRaceR Enthusiast Member Join Date: Mar 2010 Location: 33908 Posts: 382 Drives: 2010 Nismo,2008 R32 Rep Power: 15	wow bro nice work repped!!!! __________________ 2010 PW Nismo: GT-R Start / Stop \| Kenwood Navi / DVD \| Escort X50 \| F.I 18' CF \| F.I Resonated Test Pipes \| PasswordJDM \| Post MAF Tubes \| K&N Drop In's 297 RWHP 9/25/11 WTB SPARE RIM TIRE. PM ME

03-19-2011, 02:05 PM	#3 (permalink)
definitionxmk Track Member Join Date: Jul 2009 Location: Los Angeles CA Posts: 973 Drives: Stage 2 SC 370Z Rep Power: 16	Useful indeed! __________________ *FALKEN . AMUSE . STANCE . INVIDIA . MINES . TOMMY KAIRA . BRIDE . VOLK RACING . GTM* Featured in DSPORT issue #137 - Follow me on Instagram: @definitionxmk

03-29-2011, 11:23 PM	#4 (permalink)
ryanboy Base Member Join Date: Mar 2010 Location: Chicagoland Posts: 201 Drives: Red z34 09 0060 Rep Power: 15	nice! how is it working out for you? any issues? __________________ Slut RED Nismo Z34 2009 #60

03-30-2011, 04:24 PM	#6 (permalink)
ryanboy Base Member Join Date: Mar 2010 Location: Chicagoland Posts: 201 Drives: Red z34 09 0060 Rep Power: 15	thats great! thinking of getting one soon. have you drove it while raining- no moisture/water issues? __________________ Slut RED Nismo Z34 2009 #60

03-30-2011, 07:27 PM	#8 (permalink)
Nismo_Q Base Member Join Date: Jan 2011 Location: Orange County Posts: 46 Drives: 09 370z Nismo Rep Power: 14	Hows the gas milage? Notice any decrease after the install? I remember when I installed CAI on my 350z I lost about 1mpg.

03-14-2015, 06:30 PM	#10 (permalink)
Onixt Base Member Join Date: Dec 2014 Location: California Posts: 8 Drives: 2013 370z nismo Rep Power: 10	How much hp How much hp you got from stillen gen 3

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM and Stillen SC Install Facts and Results Thread	dal1307	Forced Induction	48	03-08-2011 12:36 PM
Stillen Generation 3 Ultra Long Tube Dual Intake Kit- NISMO Install	torpedo2k	Nismo 370Z	4	02-13-2011 12:00 AM
stillen intake+nismo exhaust?	triadz	Intake/Exhaust	17	01-23-2011 09:28 PM
Stillen gen.3 intake install complications...	Zrod	Intake/Exhaust	3	01-27-2010 08:49 PM