2010 370Z Roadster unlock mechanism ?

40th370z · 04-22-2010, 10:05 AM

Check your manual under INTELLIGENT KEY SYSTEM 3-6 its in the section Pre-driving checks and adjustments.

The automatic lock and unlock functions
can be deactivated or activated independently
of each other. To deactivate or activate
the automatic door lock or unlock system,
perform the following procedure:
1. Close all doors.
2. Place the ignition switch in the ON position.
3. Do one of the following within 20 seconds of
performing step 2:
. To change AUTO UNLOCK settings:
push and hold the power door lock
switch to the UNLOCK position for
more than 5 seconds.
. To change AUTO LOCK settings: push
and hold the power door lock switch to
the LOCK position for more than 5
seconds.
4. When activated, the hazard indicator will
flash twice. When deactivated, the hazard
indicator will flash once.
5. The ignition must be placed in the OFF and
ON position again between each setting change.

If you have the Nav you can also adjust it there.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My new 2010 370Z roadster	Rash1	New 370Z Owner	3	03-24-2010 03:14 PM
$37500 OTD for a 2010 370z roadster base?	Andrewgennis	Nissan 370Z Pricing / Ordering Discussions	2	01-20-2010 05:43 PM
370z Roadster Top mechanism video	AK370Z	Nissan 370Z Roadster (Convertible)	8	01-20-2010 12:21 PM
2010 370Z Roadster on auction . . .	TN370ZLC	Nissan 370Z Roadster (Convertible)	18	09-21-2009 10:51 PM
2010 Nissan 370Z Roadster Preview	AK370Z	Nissan 370Z Roadster (Convertible)	21	06-25-2009 11:14 AM

04-22-2010, 10:05 AM	#2 (permalink)
40th370z Base Member Join Date: Mar 2010 Location: Canada Posts: 134 Drives: 2010-370z-40th Ann. Rep Power: 299	Check your manual under INTELLIGENT KEY SYSTEM 3-6 its in the section Pre-driving checks and adjustments. The automatic lock and unlock functions can be deactivated or activated independently of each other. To deactivate or activate the automatic door lock or unlock system, perform the following procedure: 1. Close all doors. 2. Place the ignition switch in the ON position. 3. Do one of the following within 20 seconds of performing step 2: . To change AUTO UNLOCK settings: push and hold the power door lock switch to the UNLOCK position for more than 5 seconds. . To change AUTO LOCK settings: push and hold the power door lock switch to the LOCK position for more than 5 seconds. 4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once. 5. The ignition must be placed in the OFF and ON position again between each setting change. If you have the Nav you can also adjust it there.