New Nismo - Clutch tips

Jsolo · 12-28-2011, 03:14 PM

The clutch design in these cars (assuming it's similar/same as in the G), is not the best to learn on. In stock form, it's extremely vague with a high uptake and short friction zone.

Most manual car clutches start to grab slightly off the floor and the friction zone is lengthy. This gives very good feel and you're able to modulate the throttle accordingly. My camaro (stock clutch) was similar with regard to the uptake/friction zone, but had much better feel. The pedal was also required at least 2-3x more effort to depress. More so than even the nissan setup with no assist spring.

These engines also have very lightweight flywheels, resulting in quick rpm revup AND revdown when you're off the throttle. Get used to blipping it. Finally when shifting up, just as you almost let off the clutch pedal (pedal nearly all the way off the floor), apply some throttle - this will smooth out the shift.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
very loud clutch chatter when in first gear and i depress the clutch...	TheSnakeJake	Engine & Drivetrain	30	04-25-2010 12:07 AM
JWT clutch kit & clutch travel	g96818	Engine & Drivetrain	0	09-11-2009 03:50 AM
370Z Clutch vs. 350Z Clutch	cheeyo	Nissan 370Z General Discussions	8	01-28-2009 05:48 PM

12-28-2011, 03:14 PM	#19 (permalink)
Jsolo Track Member Join Date: Dec 2011 Location: chicago Posts: 783 Drives: '12 G37 6MT Rep Power: 16	The clutch design in these cars (assuming it's similar/same as in the G), is not the best to learn on. In stock form, it's extremely vague with a high uptake and short friction zone. Most manual car clutches start to grab slightly off the floor and the friction zone is lengthy. This gives very good feel and you're able to modulate the throttle accordingly. My camaro (stock clutch) was similar with regard to the uptake/friction zone, but had much better feel. The pedal was also required at least 2-3x more effort to depress. More so than even the nissan setup with no assist spring. These engines also have very lightweight flywheels, resulting in quick rpm revup AND revdown when you're off the throttle. Get used to blipping it. Finally when shifting up, just as you almost let off the clutch pedal (pedal nearly all the way off the floor), apply some throttle - this will smooth out the shift.