Nissan 370Z Forum
Page 50 of 76 « First 404849 50 515260 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Mid Western Region (http://www.the370z.com/mid-western-region/)
-   -   Chicago Area Cars & Coffee (http://www.the370z.com/mid-western-region/51629-chicago-area-cars-coffee.html)

ZMan8 04-02-2014 12:48 PM
Quote:
Originally Posted by Ni55anPat (Post 2765270)
Seemed good. Kinda had confusion with the tech because he said I need toe arms. I'm like we don't have toe arms, we have toe bolts. (I made the holes bigger as well)

Besides that it went good
You can have toe arms only if you get true coilovers in the rear and delete the spring perch..spl has them.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

The Dimer 04-02-2014 02:03 PM
You could get an SPL midlink that has the cup built in, but it's $800

Sent from my Nexus 5 using Tapatalk

Ni55anPat 04-02-2014 02:43 PM
Ya. No thx lol.

Got my toe in spec. Runng some hard camber frint and rear but looks good and not overdone

ZMan8 04-02-2014 02:46 PM
Quote:
Originally Posted by Ni55anPat (Post 2765614)
Ya. No thx lol.

Got my toe in spec. Runng some hard camber frint and rear but looks good and not overdone
Its not really needed imo. Unless pat will track his car

Sent from my SAMSUNG-SGH-I747 using Tapatalk

ZeroZeta 04-02-2014 06:03 PM
Quote:
Originally Posted by Ni55anPat (Post 2765270)
Seemed good. Kinda had confusion with the tech because he said I need toe arms. I'm like we don't have toe arms, we have toe bolts. (I made the holes bigger as well)

Besides that it went good
Cool. Thanks for the feedback. I am going to swing by and check them out. Right now I am fighting with Bridgestone and a dealer to find my Pole Position tires for the rear that "got lost in shipping."

How the hell does one lose big azz tires? ha ha.

One_Quick_Z 04-03-2014 12:06 AM
Quote:
Originally Posted by ZeroZeta (Post 2764441)
Hey Ni55anPat. Would you say Touge would also be a good place to have tires mounted on higher end rims? Looking for a shop where I won't need to watch like a hawk to make sure they don't scratch the wheels when mounting tires.
Quote:
Originally Posted by ZMan8 (Post 2765189)
They do a good job taking care of your car?

Sent from my SAMSUNG-SGH-I747 using Tapatalk
Quote:
Originally Posted by Ni55anPat (Post 2765268)
I don't see why not. They have high qualify wheels at the shop.

$25 mount and balance.




That is where I picked up my Stance GR+ coils and my SPC front and rear camber arms from.

They seemed like they knew what was going on as far as parts go and seemed interested in my 370 as to what was done to it, nice peple.


Just bust out the skinny jeans when you go to fit in lol......




DAN

One_Quick_Z 04-03-2014 12:09 AM
Quote:
Originally Posted by wettone10 (Post 2763660)
What's longevity of motor supercharged vs turbocharged. Approx same boost??


Sent from my iPhone using Tapatalk
Boost is boost, what matters is the quality of the tune you get, and the duration of peak boost. 9psi is the norm for VQ motors which seems to be the choice of most not wanting to pop their motor and having to build an engine.





DAN

ZMan8 04-03-2014 12:24 AM
Quote:
Originally Posted by One_Quick_Z (Post 2766580)
That is where I picked up my Stance GR+ coils and my SPC front and rear camber arms from.

They seemed like they knew what was going on as far as parts go and seemed interested in my 370 as to what was done to it, nice peple.


Just bust out the skinny jeans when you go to fit in lol......




DAN
:rofl2:

:pics: :bowrofl:
Quote:
Originally Posted by One_Quick_Z (Post 2766587)
Boost is boost, what matters is the quality of the tune you get, and the duration of peak boost. 9psi is the norm for VQ motors which seems to be the choice of most not wanting to pop their motor and having to build an engine.





DAN
:iagree:

b15 04-04-2014 08:52 AM
http://distilleryimage9.s3.amazonaws...e3e4513d_8.jpg

Jim....do it....

Ni55anPat 04-05-2014 10:00 AM
Picked her up last night from the body shop. Installing my CF goods tomorrow & detailing to the max on Tuesday :p

Has anybody used Chemical guys black light? I heard its awesome, I bought a few things from them to try.

osbornsm 04-07-2014 08:35 AM
Placeholder for Herding Cats photos...

<more to come>

:icon18:

wettone10 04-07-2014 11:33 AM
I don't know really anything about suspension stuff. I was looking at the swift spec r springs. What else would I need to do or get done to make it right with them??


Sent from my iPhone using Tapatalk

jlo370z 04-07-2014 11:38 AM
Quote:
Originally Posted by wettone10 (Post 2771915)
I don't know really anything about suspension stuff. I was looking at the swift spec r springs. What else would I need to do or get done to make it right with them??


Sent from my iPhone using Tapatalk
Rear toe bolts and a alignment. It's what I have on mine



Sent from my iPhone using Tapatalk

b15 04-07-2014 12:23 PM
Quote:
Originally Posted by wettone10 (Post 2771915)
I don't know really anything about suspension stuff. I was looking at the swift spec r springs. What else would I need to do or get done to make it right with them??


Sent from my iPhone using Tapatalk
Everyone is different. Some Zs needed nothing. Some needed toe bolts, camber arms, etc.

I'll be taking mine for an alignment in the next week or two. I gambled by just installing springs. We'll see where I come in and go from there.

ZMan8 04-07-2014 01:18 PM
Quote:
Originally Posted by b15 (Post 2771976)
Everyone is different. Some Zs needed nothing. Some needed toe bolts, camber arms, etc.

I'll be taking mine for an alignment in the next week or two. I gambled by just installing springs. We'll see where I come in and go from there.






Quote:
Originally Posted by jlo370z (Post 2771920)
Rear toe bolts and a alignment. It's what I have on mine



Sent from my iPhone using Tapatalk
I have rear camber arms and toe bolts.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

wettone10 04-07-2014 01:20 PM
Where did you get camber arms and toe bolts??


Sent from my iPhone using Tapatalk

osbornsm 04-07-2014 02:29 PM
http://i62.photobucket.com/albums/h1...2.jpg~original
http://i62.photobucket.com/albums/h1...7.jpg~original
http://i62.photobucket.com/albums/h1...9.jpg~original
http://i62.photobucket.com/albums/h1...c.jpg~original
http://i62.photobucket.com/albums/h1...6.jpg~original
http://i62.photobucket.com/albums/h1...b.jpg~original
http://i62.photobucket.com/albums/h1...9.jpg~original
http://i62.photobucket.com/albums/h1...5.jpg~original
http://i62.photobucket.com/albums/h1...a.jpg~original
http://i62.photobucket.com/albums/h1...f.jpg~original
http://i62.photobucket.com/albums/h1...4.jpg~original
http://i62.photobucket.com/albums/h1...7.jpg~original
http://i62.photobucket.com/albums/h1...1.jpg~original
http://i62.photobucket.com/albums/h1...b.jpg~original
http://i62.photobucket.com/albums/h1...9.jpg~original
http://i62.photobucket.com/albums/h1...0.jpg~original
http://i62.photobucket.com/albums/h1...7.jpg~original
http://i62.photobucket.com/albums/h1...2.jpg~original
http://i62.photobucket.com/albums/h1...9.jpg~original
http://i62.photobucket.com/albums/h1...3.jpg~original
http://i62.photobucket.com/albums/h1...0.jpg~original
http://i62.photobucket.com/albums/h1...7.jpg~original
http://i62.photobucket.com/albums/h1...0.jpg~original
http://i62.photobucket.com/albums/h1...c.jpg~original
http://i62.photobucket.com/albums/h1...f.jpg~original
http://i62.photobucket.com/albums/h1...0.jpg~original
http://i62.photobucket.com/albums/h1...e.jpg~original
http://i62.photobucket.com/albums/h1...1.jpg~original
http://i62.photobucket.com/albums/h1...a.jpg~original
http://i62.photobucket.com/albums/h1...0.jpg~original

osbornsm 04-07-2014 02:30 PM
I believe... you're welcome. :)

Meulen 04-07-2014 03:06 PM
Great pics Sean! and the car is looking TIGHT! too!!:tiphat:

b15 04-07-2014 03:37 PM
Nice pictures! Really wish I could've made it!

b15 04-07-2014 03:47 PM
Quote:
Originally Posted by osbornsm (Post 2772156)
Any plans to correct the 4x4 status?

jlo370z 04-07-2014 04:52 PM
Quote:
Originally Posted by b15 (Post 2772246)
Nice pictures! Really wish I could've made it!

You missed a great time


Sent from my iPhone using Tapatalk

ZMan8 04-07-2014 04:56 PM
Quote:
Originally Posted by b15 (Post 2772246)
Nice pictures! Really wish I could've made it!
Me as well :tup:

Sent from my SAMSUNG-SGH-I747 using Tapatalk

osbornsm 04-08-2014 07:45 AM
Quote:
Originally Posted by b15 (Post 2772253)
Any plans to correct the 4x4 status?
Well i figured it would cost me about $5,000 to lower the Z the extra inch you get from Swifts...:eek: i have to buy another car in order to lower it. And i just ain't got money for that... yet.

For those who don't know, the 370 is my only vehicle.

b15 04-08-2014 08:45 AM
Quote:
Originally Posted by osbornsm (Post 2772937)
Well i figured it would cost me about $5,000 to lower the Z the extra inch you get from Swifts...:eek: i have to buy another car in order to lower it. And i just ain't got money for that... yet.

For those who don't know, the 370 is my only vehicle.
Haha on first take I was like Swifts? $5000? Are you on crack?

osbornsm 04-08-2014 09:23 AM
Quote:
Originally Posted by b15 (Post 2773069)
Haha on first take I was like Swifts? $5000? Are you on crack?
Just do it for the shock value :eek:

;)

wettone10 04-08-2014 03:29 PM
Any local powder coaters??


Sent from my iPhone using Tapatalk

Meulen 04-08-2014 03:31 PM
1 Attachment(s)
Quote:
Originally Posted by wettone10 (Post 2773506)
Any local powder coaters??


Sent from my iPhone using Tapatalk
Lo-ko Performance in Oak Lawn, does all of mine.

wettone10 04-08-2014 03:33 PM
Do you know price ranges??


Sent from my iPhone using Tapatalk

Meulen 04-08-2014 04:01 PM
Quote:
Originally Posted by wettone10 (Post 2773512)
Do you know price ranges??


Sent from my iPhone using Tapatalk
I don't, give them a call (708) 424-7863. If you talk to Jon, tell im Brian sent you.

ZMan8 04-10-2014 10:07 AM
:icon08:

Sent from my SAMSUNG-SGH-I747 using Tapatalk

wettone10 04-10-2014 10:56 AM
If I'm looking to supercharge eventually should I just get a catback?? Not worry about hfc or test pipes just yet??


Sent from my iPhone using Tapatalk

ZMan8 04-10-2014 11:27 AM
Quote:
Originally Posted by wettone10 (Post 2776314)
If I'm looking to supercharge eventually should I just get a catback?? Not worry about hfc or test pipes just yet??


Sent from my iPhone using Tapatalk
I think with supercharger you can have test pipes.

b15 04-10-2014 12:53 PM
73* and partly cloudy on Saturday :happydance:

Z is definitely coming out to play.

ZMan8 04-10-2014 02:24 PM
Quote:
Originally Posted by b15 (Post 2776463)
73* and partly cloudy on Saturday :happydance:

Z is definitely coming out to play.
:tup: mine as well

Sent from my SAMSUNG-SGH-I747 using Tapatalk

jlo370z 04-10-2014 05:50 PM
Look for me I'll be out


Sent from my iPhone using Tapatalk

NFSZ86 04-10-2014 05:56 PM
Quote:
Originally Posted by Meulen (Post 2773509)
Lo-ko Performance in Oak Lawn, does all of mine.

Did u powder coat ur intakes ?

Meulen 04-10-2014 10:30 PM
Quote:
Originally Posted by NFSZ86 (Post 2776752)
Did u powder coat ur intakes ?

Yep. :)

jlo370z 04-10-2014 10:40 PM
Me too ;)


Sent from my iPhone using Tapatalk

gbrettin 04-11-2014 08:59 AM
I posted the same message in the Great Lakes thread... but are any of you planning on going to Zdayz? Perhaps we can get a convoy going.


All times are GMT -5. The time now is 06:59 PM.
Page 50 of 76 « First 404849 50 515260 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2