Headlight modification?

b1adesofcha0s · 08-09-2012, 09:05 PM

Someone should bring bottled water or soda too for those of us that don't drink.

dmhenderson · 08-09-2012, 09:07 PM

Quote:

Originally Posted by b1adesofcha0s

Someone should bring bottled water or soda too for those of us that don't drink.

Added.

dmhenderson · 08-09-2012, 09:06 PM

I can always give away one of my "brings" - just took both because i want vodka for sure and can bring good wings.

If we get enough people to volunteer I'll give one away. Esp if we're capping this at 8 people.

eastwest2300 · 08-09-2012, 09:35 PM

Remember the Rubber Butyl (sealant) It looks like a tube of caulk, you need a caulking gun to use it.

MyKindaGuise · 08-09-2012, 10:11 PM

Hey guys I was at a meet tonight and talked with some folks who have done this already and are in the autobody industry. Im not going to lie. I think I may wait for my paint job. The paint needs around 12 hours of air drying time for all moisture to evaporate. If you dont wait you run a serious risk of of having sealing issues or moisture in your light. Do you guys plan on leaving them sit for 6-8 once we have them apart and painted? Because I would be okay with that. I think regardless I am going down to atleast meet you all and help out I just dont know if it is my time yet.lol I can bring soda and water

Sales@AAMComp · 08-09-2012, 11:02 PM

Quote:

Originally Posted by MyKindaGuise

Hey guys I was at a meet tonight and talked with some folks who have done this already and are in the autobody industry. Im not going to lie. I think I may wait for my paint job. The paint needs around 12 hours of air drying time for all moisture to evaporate. If you dont wait you run a serious risk of of having sealing issues or moisture in your light. Do you guys plan on leaving them sit for 6-8 once we have them apart and painted? Because I would be okay with that. I think regardless I am going down to atleast meet you all and help out I just dont know if it is my time yet.lol I can bring soda and water

my tip is to not cake on the paint, paint enough to cover what needs to be covered and thats it. The more you paint the longer it'll take to dry but light coats to cover your bases you'll be fine. IF you put it back together while its still wet, yes the paint will dry and evaporate to the inner side of your lens and I know exactly what this looks like. It really isn't that bad but you can tell your lens is not 100% clear like it was from factory. If it's a nice sunny day, there won't be an issue with the paint drying quickly. If it's rainy and humid.. I would suggest heat lamp and letting it dry indoor maybe

dmhenderson · 08-10-2012, 10:17 AM

Quote:

Originally Posted by MyKindaGuise

Do you guys plan on leaving them sit for 6-8 once we have them apart and painted?

I know I do but I'm planning on getting there at 9:00am.

Edeit: "potluck" list updated.

Sales@AAMComp · 08-09-2012, 11:15 PM

before:

after:
blacked out and removed the amber piece. WHAT A DIFFERENCE lol

anyone from here?? lol

dmhenderson · 08-14-2012, 03:22 PM

Quote:

Originally Posted by Khoi@AAMComp

This. This right here is what I want the headlights on my car to look like - the black Z in this picture.

Do I need anything else to make this happen other than what we have planned?

(not counting the LEDs of course)

eastwest2300 · 08-14-2012, 05:16 PM

Quote:

Originally Posted by dmhenderson

This. This right here is what I want the headlights on my car to look like - the black Z in this picture.

Do I need anything else to make this happen other than what we have planned?

(not counting the LEDs of course)

We should have everything we need as long as people bring everything that they said they were gonna bring. We should be good to go. That heat gun is gonna make life sooo much easier.

dmhenderson · 08-14-2012, 10:43 PM

Quote:

Originally Posted by eastwest2300

We should have everything we need as long as people bring everything that they said they were gonna bring. We should be good to go. That heat gun is gonna make life sooo much easier.

Yeah I was amazed at how quickly it zapped my front emblem off on my '09. You have to be super careful though. It will melt paint/plastic/your face if you aren't good with it.

RandyD · 08-15-2012, 08:37 AM

Quote:

Originally Posted by dmhenderson

This. This right here is what I want the headlights on my car to look like - the black Z in this picture.

Do I need anything else to make this happen other than what we have planned?

(not counting the LEDs of course)

come to FFX this weekend and ask Jon - he'll tell you all about what was done.

dmhenderson · 08-15-2012, 09:54 AM

Quote:

Originally Posted by RandyD

come to FFX this weekend and ask Jon - he'll tell you all about what was done.

What's "FFX"? Fairfax?

b1adesofcha0s · 08-15-2012, 09:58 AM

Quote:

Originally Posted by dmhenderson

Yes, it's small. I'm by far the youngest member. They're more into classics than the newer cars. Modding is not something they'd be interested in.

Isn't a heat gun quicker/safer? Our Service guy doesn't want to give it to me for 2 weekends in a row but I can buy one for like $15.00 so it's not a big deal. I'd be willing to invest in a heat gun - I'm sure I'll need it again in the future.

Actually the opposite. The oven method is much quicker and safer for the headlights. The oven allows you to heat the whole headlight at once vs doing it one small spot at a time. Also you can control the temperature better and are less likely to spot burn or melt the lens.

Quote:

Originally Posted by dmhenderson

What's "FFX"? Fairfax?

Yes.

eastwest2300 · 08-09-2012, 11:34 PM

I got 40 bumper rivets coming, so anyone loses any, they can be replaced. That'll be my contribution.. Fellas, if any of yall can bring a heat gun, or your lady's hair dryer, bring them if you can, so we can quicken the paint drying process.

08-09-2012, 09:05 PM	#1 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 142	Someone should bring bottled water or soda too for those of us that don't drink. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

08-09-2012, 09:06 PM	#3 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 27	I can always give away one of my "brings" - just took both because i want vodka for sure and can bring good wings. If we get enough people to volunteer I'll give one away. Esp if we're capping this at 8 people. __________________

08-09-2012, 09:35 PM	#4 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 91,033 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684552	Remember the Rubber Butyl (sealant) It looks like a tube of caulk, you need a caulking gun to use it. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

08-09-2012, 10:11 PM	#5 (permalink)
MyKindaGuise A True Z Fanatic Join Date: Feb 2012 Location: Pennsylvania Posts: 2,029 Drives: 11' 370z Sprt M6 Rep Power: 20	Hey guys I was at a meet tonight and talked with some folks who have done this already and are in the autobody industry. Im not going to lie. I think I may wait for my paint job. The paint needs around 12 hours of air drying time for all moisture to evaporate. If you dont wait you run a serious risk of of having sealing issues or moisture in your light. Do you guys plan on leaving them sit for 6-8 once we have them apart and painted? Because I would be okay with that. I think regardless I am going down to atleast meet you all and help out I just dont know if it is my time yet.lol I can bring soda and water __________________ \|445whp398tq\| \|BW S259 Turbo\|3" Downpipe\Exhaust\|ID1000\|AeroMotive\|Tial\|EcuTek\|BC BR\|S0-4\|MaffFab\| MKGs-Single-Turbo

08-09-2012, 11:15 PM	#8 (permalink)
Sales@AAMComp A True Z Fanatic Join Date: Jul 2012 Location: Annapolis Junction, MD Posts: 4,079 Drives: GT-R Rep Power: 22	before: after: blacked out and removed the amber piece. WHAT A DIFFERENCE lol anyone from here?? lol __________________ Tyler Day, Technical Sales TylerD@aamcompetition.com 301-497-9214 Direct AAM Competition \| YouTube channel \| LIKE us on Facebook!

08-09-2012, 11:34 PM	#15 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 91,033 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684552	I got 40 bumper rivets coming, so anyone loses any, they can be replaced. That'll be my contribution.. Fellas, if any of yall can bring a heat gun, or your lady's hair dryer, bring them if you can, so we can quicken the paint drying process. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any Texas headlight modification locations?	ccdominic	Texas	89	04-29-2013 09:37 AM
How fast have you driven your Z with or w/out modification?	Zoren 370	Nissan 370Z General Discussions	2	03-21-2012 10:17 PM
New to this... were should I go to post a question regarding headlight modification	Bubba	The370Z.com Feedback, Suggestions & Questions	1	03-14-2012 04:21 PM
Headlight modification	Bubba	Exterior & Interior	3	03-14-2012 08:57 AM
Lights Modification.	Kensi	Canada	6	07-20-2011 10:32 PM