PTUNING: UpRev Pro Tune (Mid-Atlantic)

Drew@PTUNING · 07-16-2012, 12:44 PM

Here is a 2010 370Z MT we tuned this past weekend 7/14/2012

Car spec's:
2010 370z
Tranny: MT
Mods: Stillen Gen 3 intakes, Fast Intentions dual catback exhaust, Z1 high flow resonated cats.

The car made 320.6 whp, and 250.6 FtLb

Big thanks to Frankie. K, for allowing us to tune your car.

~Drew. R
703-257-1728

4r3s · 07-16-2012, 01:15 PM

how come no one took pics of my car on the dyno, and no one posted the results from your shop?

Drew@PTUNING · 07-16-2012, 02:06 PM

Quote:

Originally Posted by 4r3s

how come no one took pics of my car on the dyno, and no one posted the results from your shop?

Please pm me your info. I probably snapped a couple pics of your car on our dyno. If I find anything I can post it in this thread.

Drew.R

FPenvy · 07-16-2012, 03:21 PM

This all makes me excited to hopefully set up a date soon to come get my Z tuned

Drew@PTUNING · 07-17-2012, 02:42 PM

Quote:

Originally Posted by FPenvy

This all makes me excited to hopefully set up a date soon to come get my Z tuned

Give us a call when your ready to come in!!

Drew. R

FPenvy · 07-17-2012, 03:48 PM

Quote:

Originally Posted by Drew@PTUNING

Give us a call when your ready to come in!!

Drew. R

I'm ready just gotta figure out the game plan since I'm drivin past u guys on Saturday aug 4th to go on vacation I was gonna stop then and get it done

dmhenderson · 07-17-2012, 06:58 PM

Hi, quick question regarding HFC/header installs. The quote you gave me via text said something to the effect of "there's a 50/50 chance we may break the O2 sensor when installing HFCs and if that happens, I would be responsible for replacing it.

Is that right? Seems...a little off.

Drew@PTUNING · 07-18-2012, 09:50 AM

Quote:

Originally Posted by dmhenderson

Hi, quick question regarding HFC/header installs. The quote you gave me via text said something to the effect of "there's a 50/50 chance we may break the O2 sensor when installing HFCs and if that happens, I would be responsible for replacing it.

Is that right? Seems...a little off.

Hello dmhenderson,

I wasn't the one who gave you this quote but I can say that is completely accurate. Out of all the G37 and 370z's we have replaced the headers on we do have a 50/50 chance of saving the o2 sensor. The threads on the o2 sensors tend to destroy themselves while we are removing them, we try to be very careful while removing them and for the most part we can save at least one of them from failing. But in the case that they do fail, this is on the customer to replace.

Drew. R

dmhenderson · 07-18-2012, 12:44 PM

I meant the royal "you" (being P-Tuning). Doug gave me the quote. That does make sense though. Any idea what the sensors run price-wise off the top of your head?

Drew@PTUNING · 07-19-2012, 09:14 AM

Quote:

Originally Posted by dmhenderson

I meant the royal "you" (being P-Tuning). Doug gave me the quote. That does make sense though. Any idea what the sensors run price-wise off the top of your head?

Unfortunately they are fairly expensive. They run around $200.00 a piece

Drew.R

Drew@PTUNING · 07-27-2012, 02:46 PM

Here is a 2003 350Z MT we tuned this past week 7/27/2012

Car spec's:
ECU: UpRev with GT MAF
2003 350z
Tranny: MT
Gas: 93 octane
Mods: Fully built engine, Return style fuel system, Momentum GT-35R turbo kit, Custom turbo back exhaust, Kinetix intake manifold, South bend clutch and much much more.

The car made 517.8whp and 462.8 FtLb @15psi Tapper down to 13psi by redline. The temperature was 93 degrees in the dyno cell.

It was a very exciting day tuning this car.

~Drew. R
703-257-1728

Youtube Video of the dyno pull.
http://www.youtube.com/watch?v=4YUWr...ature=youtu.be

lexani · 07-28-2012, 08:52 PM

Car only has intake and exhaust. Pm tune price. The car is 7AT. Thanks

Diego@PTUNING · 08-13-2012, 08:26 AM

Bump

Doug@PTUNING · 08-20-2012, 03:52 PM

Quote:

Originally Posted by lexani

Car only has intake and exhaust. Pm tune price. The car is 7AT. Thanks

Send you PM

Drew@PTUNING · 08-24-2012, 02:40 PM

Another PTUNING UpRev Tuned 350z Twin turbo 436.4 @ 8psi running 93 octane.

Mods:
SFR 60trim TT kit (Stock motor)
RC 440 injectors (93 octane)
Half return system
Full exhaust
GT maf

Youtube video of the dyno pull
PTUNING UpRev Tuned 350z Twin turbo 436.4 @ 8psi running 93 octane - YouTube

07-27-2012, 02:46 PM	#101 (permalink)
Drew@PTUNING Base Member Join Date: Mar 2012 Location: Manassas Posts: 34 Drives: 2008 Infiniti G37s Rep Power: 13	Here is a 2003 350Z MT we tuned this past week 7/27/2012 Car spec's: ECU: UpRev with GT MAF 2003 350z Tranny: MT Gas: 93 octane Mods: Fully built engine, Return style fuel system, Momentum GT-35R turbo kit, Custom turbo back exhaust, Kinetix intake manifold, South bend clutch and much much more. The car made 517.8whp and 462.8 FtLb @15psi Tapper down to 13psi by redline. The temperature was 93 degrees in the dyno cell. It was a very exciting day tuning this car. ~Drew. R 703-257-1728 Youtube Video of the dyno pull. http://www.youtube.com/watch?v=4YUWr...ature=youtu.be __________________ PTUNING.COM \| 9432 Center Point Lane \| Manassas, VA 20110 \| Local: 703-257-1728 \| Toll Free: 1-877-788-6464 \| Web: www.ptuning.com \| PTUNING on Facebook \| Authorized UpRev Pro Tuner \| Authorized Toyo Tires UHP and Motorsports Tire Dealer \| Dynocell-enclosed Dyno Last edited by Drew@PTUNING; 07-27-2012 at 03:32 PM.

07-28-2012, 08:52 PM	#102 (permalink)
lexani Base Member Join Date: Jun 2009 Location: DC Posts: 113 Drives: 2009 370z sport Rep Power: 16	Pm tuning price Car only has intake and exhaust. Pm tune price. The car is 7AT. Thanks

08-13-2012, 08:26 AM	#103 (permalink)
Diego@PTUNING Base Member Join Date: Mar 2012 Location: Burke Posts: 20 Drives: Honda S2000,87 325is Rep Power: 13	Bump __________________ PTUNING.COM \| 9432 Center Point Lane \| Manassas, VA 20110 \| Local: 703-257-1728 \| Toll Free: 1-877-788-6464 \| Web: www.ptuning.com \| PTUNING on Facebook \| Authorized UpRev Pro Tuner \| Authorized Toyo Tires UHP and Motorsports Tire Dealer \| Dynocell-enclosed Dyno

08-24-2012, 02:40 PM	#105 (permalink)
Drew@PTUNING Base Member Join Date: Mar 2012 Location: Manassas Posts: 34 Drives: 2008 Infiniti G37s Rep Power: 13	Another PTUNING UpRev Tuned 350z Twin turbo 436.4 @ 8psi running 93 octane. Mods: SFR 60trim TT kit (Stock motor) RC 440 injectors (93 octane) Half return system Full exhaust GT maf Youtube video of the dyno pull PTUNING UpRev Tuned 350z Twin turbo 436.4 @ 8psi running 93 octane - YouTube __________________ PTUNING.COM \| 9432 Center Point Lane \| Manassas, VA 20110 \| Local: 703-257-1728 \| Toll Free: 1-877-788-6464 \| Web: www.ptuning.com \| PTUNING on Facebook \| Authorized UpRev Pro Tuner \| Authorized Toyo Tires UHP and Motorsports Tire Dealer \| Dynocell-enclosed Dyno

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Uprev tune in MD?	tonybui	Mid-Atlantic Region	131	03-30-2012 10:29 AM
Considering Uprev tune	Skeeterbop	Tuning	14	02-21-2012 03:20 PM
UpRev Tune	bigdog1250	Northern California Region	5	02-01-2012 06:53 PM
my Z1 uprev tune	alejo	Tuning	2	12-24-2011 02:36 PM
got my uprev tune	franky2222	Tuning	3	06-06-2011 08:18 PM

07-16-2012, 01:15 PM	#92 (permalink)
4r3s A True Z Fanatic Join Date: Dec 2009 Location: MD Posts: 2,077 Drives: Touring 370z Rep Power: 24	how come no one took pics of my car on the dyno, and no one posted the results from your shop?

07-17-2012, 06:58 PM	#97 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Hi, quick question regarding HFC/header installs. The quote you gave me via text said something to the effect of "there's a 50/50 chance we may break the O2 sensor when installing HFCs and if that happens, I would be responsible for replacing it. Is that right? Seems...a little off.

07-18-2012, 12:44 PM	#99 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	I meant the royal "you" (being P-Tuning). Doug gave me the quote. That does make sense though. Any idea what the sensors run price-wise off the top of your head?