axxess module.

Unclemeaty

I finally got my Axxess ASWC module to work with all steering wheel buttons and my Pioneer HU. The problem wasnt with the pioneer, but with the Axxess's inability to grab control of all the steering wheel buttons. With some TLC and carful monitoring, I found on my car that auto-programming (volume + button) as instructed did not allow the Axxess to find one vehicle wires connected. I noticed this through monitoring the LED flashes after programming.

To get past this, I had to manually assign each button; one at a time. I did not have to use resistors or anything, just carefull reading of about 20 steps.

First, you must wire the Axxess ASWC per instructions for Nissan 370z. Here are the 370z's instructions:

http://documents.victorytechnologies...icle/10973.pdf

Second, re-program all the wheel buttong manually following instructions starting on Page 8 where it says "*If the ASWC has been in a vehicle before"
through Page 10 of this pdf:

*Note - You need access to the unit's reset button to manually program.
http://www.axxessinterface.com/pdf/I...Web_number.pdf

That did it for me!!

370z wiring reference:
Resistance Type Control System YES
Reference Ground Wire Color LIGHT GREEN
Reference Ground Polarity (-)
Reference Ground Location RADIO HARNESS
Reference Ground Pin # 15
Control Wire 1 Wire Color PINK
Control Wire 1 Polarity (-)
Control Wire 1 Location RADIO HARNESS
Control Wire 1 Pin # 6
Control Wire 2 Wire Color BLUE
Control Wire 2 Polarity (-)
Control Wire 2 Location RADIO HARNESS
Control Wire 2 Pin # 16