YzGyz

The kit install itself is not bad at all. I would estimate it would take good weekend (25 hrs) If you have all your tools lined up. I approve of the kit's design. The instructions for the most part is clear. There were some areas that I couldn't follow but you could post and ask for help. Quite a few people have taken on the task so there are people who can help. SASHA is pretty good with respond to e mails And pm's. I would rate the turbo install itself a 6/10.

List of things to have ready:
-clutch and flywheel to handle power goal
-tools, sockets, lots of extensions, wobble bits, large adjustable Cresent wrench
-safe flat surface and Jack stands
-some lube ( I used water based like KY) to lube up the couplers so they slide together easier
-good light to see around in
-make sure you can get the cat off
-soldering iron and shrink wrap

Hey YzGyz! I was just looking at your build thread and I was wondering how the installation of your BP turbo was and any initial thoughts or comments on the setup in general?

Thanks for all the ideas and help. We had a small drizzle here. The good 20 minutes of clay baring the windshield did the job. It got rid of most of the spotting and allowed the wiper to squeegee the...

Thanks for all the ideas and help. We had a small drizzle here. The good 20 minutes of clay baring the windshield did the job. It got rid of most of the spotting and allowed the wiper to squeegee the...

The PP was ok. It was not tender enough. Internal temp needed to get closer to 200f for it to really pull easy. I got tired and hungry from constantly smelling the smoke so I pulled them from the MES...

There was a food thread a while back but I can't find it. I'm staring a new one in hope of many people joining in and sharing the foodie fun with experience, pictures and fun. I'll start it off....

There was a food thread a while back but I can't find it. I'm staring a new one in hope of many people joining in and sharing the foodie fun with experience, pictures and fun. I'll start it off....

There was a food thread a while back but I can't find it. I'm staring a new one in hope of many people joining in and sharing the foodie fun with experience, pictures and fun. I'll start it off....

As far as I know, the 2010 model is the best one. I should know. I own one and she rocks. Tell me I'm wrong and I tell them you're stupid. =√o YzGyz

Those scissor jack are for icoe (in case of emergency) only. Would not try to get the car up that high on a wonky scissor jack. They can tip over very easy (never happened I met but just look at the...

Yet again I have another small update. Went to the local 1/8 drag again on Friday. Lot's of decent racers out with the cool night air. Anyhoo, I clocked crazy time on my first pass. I'm not sure how...

You can definitely get boosted for $10k or even less for that matter. Being boosted is one thing. How will you use the power is another. Making 1000hp means nothing if it took 6 straps on the dyno...

Zombie car YzGyz

You can definitely get boosted for $10k or even less for that matter. Being boosted is one thing. How will you use the power is another. Making 1000hp means nothing if it took 6 straps on the dyno...

Yet again I have another small update. Went to the local 1/8 drag again on Friday. Lot's of decent racers out with the cool night air. Anyhoo, I clocked crazy time on my first pass. I'm not sure how...

Yet again I have another small update. Went to the local 1/8 drag again on Friday. Lot's of decent racers out with the cool night air. Anyhoo, I clocked crazy time on my first pass. I'm not sure how...

I would not make the back end higher in hopes to get better drag times. I think it would mean you will have an even angle of squat on acceleration. The weight VB of the car will transfer most of its...