YzGyz

The kit install itself is not bad at all. I would estimate it would take good weekend (25 hrs) If you have all your tools lined up. I approve of the kit's design. The instructions for the most part is clear. There were some areas that I couldn't follow but you could post and ask for help. Quite a few people have taken on the task so there are people who can help. SASHA is pretty good with respond to e mails And pm's. I would rate the turbo install itself a 6/10.

List of things to have ready:
-clutch and flywheel to handle power goal
-tools, sockets, lots of extensions, wobble bits, large adjustable Cresent wrench
-safe flat surface and Jack stands
-some lube ( I used water based like KY) to lube up the couplers so they slide together easier
-good light to see around in
-make sure you can get the cat off
-soldering iron and shrink wrap

Hey YzGyz! I was just looking at your build thread and I was wondering how the installation of your BP turbo was and any initial thoughts or comments on the setup in general?

Well after months of reading debates on whether rear speakers are necessary or not, I decided to go ahead with the install. It's still an ongoing debate, but I'm gonna try to end it now. Some...

That's true and why I've left it alone for so long, but just hearing about Focals and JL's have me wondering all the time about how much better or not the sound can be. I ordered the JL and If I...

Go to JTran if you want it installed, although I have a feeling you're talking about them... In Houston though... You have a HUUUUGE family. Host some parties, buy a ton of beer, install it with...

I myself would get the clutch sorted out by a reputable shop and then tackle the SC install. Unless you have help, it could be a real task to pull the tranny and even harder to get it back in! It can...

So a sliver of light. The compressor housing arrived at the shop just now.

If you think we could knock it out in a weekend, I'd be willing to help. I've got a lift and I work pretty cheap. Edit - I'm talking about the SC, not the clutch job.

This one, correct? Amazon.com: JL Audio 10W3v3-4 10" Single 4 ohm W3v3 Series Subwoofer 10W3v3: Cell Phones & Accessories...

Yes, I have a tracking number for you and it should all be there by Wednesday/Thursday.

Boost is up :yum: http://www.the370z.com/members/kukpet-albums-v-mount-picture92871-20160604-203147.jpg

I'm so ready to get a few passes in; but all of this rain has had the closest 1/4 mile track shut down....Thursday night coming is supposed to be clear.

Now that MAY-hem (what I call the month of May) is over and my life is back to what I call "normal"......it is time to get to work on the SC build. Today was software day. I downloaded the AEM...

Last weekend, I had the treat of attending Chip Ganassi's pre-Indy 500 Open House. Full access to anywhere in the shop - though I'm sure a lot of things were put away. A few pics: When you've got...

The problem with a pressure washer is it still doesn't remove all of the grime attached to the paint. You have to PHYSICALLY touch that dirt in order to remove it. This is why at a touchless car...

Yesterday I used my QuickJack to lift my wife's Toyota Matrix. The A/C drain had gotten clogged up and I ran a coat hanger wire through it. Unfortunately that didn't reach correctly so I had to pull...

Are the two existing owners registered user in this forum? If so, I would trace through the posts and get a feel for the usage type, owners' level of knowledge and maturity. Just purely on the...