Tractionless

Sold some shocks to Tractionless. Nice, easy guy to deal with. Thanks!

I highly recommend NOT using Getyourwheels.com

I had a problem with my Forgestar F14's clear coat failing within 4 months and 1,500 miles of ownership in a state that doesn't see freeze/thaw nor use road salt.

Get your wheels receives them as blanks from Forgestar and then finishes to your liking. Who ever they are using for coating is subpar!

They tried blaming my installer but when I told them i went to a high end shop that deals with all kinds of wheels in sizes up to 30" and showed pics of the machines they backed off. Then they admitted the coater was having problems with the clear that was used on my wheels.

They told me I had to cover dismount, shipping both ways and re-mounting costs to have them recoated.

Upon receiving them back the water that got below the clear damaged the metal permanently. So although recoated the damage can always be seen underneath. They did not tell me that prior to shipping back.

When approaching them about it they offered me a $50 refund on a $2100 set of wheels.

RUN from Getyourwheels.com!!!!

Thanks for an easy transaction. Super transparent and communicative buyer! Buy/sell with confidence.

excellent seller everything worked out great thanks

10/10 would recommend Tractionless as a seller. I recently bought some used wheels from him and he shipped them out the next day. They arrived exactly as described and they were packaged very well! Thanks again

"Tractionless is one of the nicest person I have ever dealt with. I would definitely
do another transaction with him in the future."

I second that, a pleasure to do business with!!

Tractionless is one of the nicest person I have ever dealt with. I would definitely
do another transaction with him in the future.

Ironically, I have this diffuser since 2019. Installation was pretty easy with what I would call minor fitment issues. This was before my terrible experiences with Fly1. I can snap photos soon.

Thanks for those of you who responded. I haven't seen a more aggressive diffuser that flows with the base bumper as well as this one. Will definitely look into purchasing it !

Turned out to be an idler pulley bearing. That would explain why there was no codes and the engine performance was fine.

Just installed a front splitter from Artwork Bodyshop. I think it looks pretty nice!

There is a possibilty that this is not meant to direct air, rather pull air away. Can't really tell from this picture, but I can see that happening, if a negative pressure is built up behind and...

Weather permitting I will be there with the new Z.

Yeah, the Z has a steep camber curve designed into the rear suspension. The more it squats, the more camber it gets.

No reason anything should change even after nine years.

yeah ill give it a miss, if bits of something has gone through the oil enough to block the filter in the head its probably damaged the bearings and scored the bore and probably has bits stuck in the...

Read

Mine also reads dead on with stock 245/45/18s.

Curious if you put dielectric grease on the connectors? I had LED bulbs going out on my Juke every few months, then I used the grease and haven't had anymore issues.

Yeah definitely have had to make sure I’m purposeful and accurate with my orders from Z1, their shipping rates have always been something of a sore spot for me as I have ordered a replacement oem...

Thanks traction. Currently it hasn’t had any issues this entire week, and I’m still awaiting my pigtails. Corrosion I could see as I’m encroaching 250k miles.

Yup, sounds like an injector issue. Pull them and have your injectors cleaned.