Tractionless

Sold some shocks to Tractionless. Nice, easy guy to deal with. Thanks!

I highly recommend NOT using Getyourwheels.com

I had a problem with my Forgestar F14's clear coat failing within 4 months and 1,500 miles of ownership in a state that doesn't see freeze/thaw nor use road salt.

Get your wheels receives them as blanks from Forgestar and then finishes to your liking. Who ever they are using for coating is subpar!

They tried blaming my installer but when I told them i went to a high end shop that deals with all kinds of wheels in sizes up to 30" and showed pics of the machines they backed off. Then they admitted the coater was having problems with the clear that was used on my wheels.

They told me I had to cover dismount, shipping both ways and re-mounting costs to have them recoated.

Upon receiving them back the water that got below the clear damaged the metal permanently. So although recoated the damage can always be seen underneath. They did not tell me that prior to shipping back.

When approaching them about it they offered me a $50 refund on a $2100 set of wheels.

RUN from Getyourwheels.com!!!!

Thanks for an easy transaction. Super transparent and communicative buyer! Buy/sell with confidence.

excellent seller everything worked out great thanks

10/10 would recommend Tractionless as a seller. I recently bought some used wheels from him and he shipped them out the next day. They arrived exactly as described and they were packaged very well! Thanks again

"Tractionless is one of the nicest person I have ever dealt with. I would definitely
do another transaction with him in the future."

I second that, a pleasure to do business with!!

Tractionless is one of the nicest person I have ever dealt with. I would definitely
do another transaction with him in the future.

You can even change what the buttons do in the steering wheel. I opted for volume for the silver up/down, track change and preset change for the middle, and manual search for the bottom.

Ok but the Z's ecu starts pulling timing (i.e. Power reduction) prior to oil breaking down. Cooler oil = more timing = more power.

Needs to be lowered!!

It's cake and if you're buddy is replacing just what comes out of the pan, he's doing you a disservice. I drain 5.5 qts out with car on stands in front and ground in the rear then you still have...

It's cake and if you're buddy is replacing just what comes out of the pan, he's doing you a disservice. I drain 5.5 qts out with car on stands in front and ground in the rear then you still have...

Maybe a better overall outcome but not a

Machined with polished lip (all matte cleared) Forgestar F14's mounted with 255/40/19 fronts, 325/30/19 rears. Not mounted on car yet, pics will be posted. On way out to garage to install...

Okay

You sure? I see lots of cars running into things.

Awesome, thanks so much ordered from Ebay this morning. :tiphat:

Who cares what strangers think!! Have you seen what you're surrounded by lately? Their comments/opinions carry zero weight with me. (Not here on forum, life in general).

Who cares what strangers think!! Have you seen what you're surrounded by lately? Their comments/opinions carry zero weight with me. (Not here on forum, life in general).

WEnt with F14's in all machined with polished lip and entirety matte clearcoated. Should be a different look from what I've seen floating around. Will also gel with the OE light silver paint. ...

Anything's possible with Floridiots involved.

http://www.the370z.com/audio-video/125558-pioneer-appradio-3-iphone-5c-connection-help-needed.html Replied to you in the above thread you commented in.