synolimit

Hello, Are you still porting TB'S? Thank you.

Hello, Are you still porting TB's? Thank you.

Hi, Synolimit. I was reaching out to get some info about porting manifolds, but another member told me you haven't been active on this forum for a while. Seeing the other messages on your profile let's me know you've been inactive for quite some time. I hope everything is OK and you are doing well!

This is your id scott? Just say hi!

there are people trying to get hold of you. Me too eventually when u have a manifold ported since the car is my DD. Hope all is well

i saw on a post that you are running obx long tube headers. You mind giving me a full review on them like whp, torque, and installation etc? i was thinking about getting those myself.

Hey man I have 2 bnib driver side throttle bodies for sale if you're interested. I bought one left and one right but they sent me two driver's side tbs and this was the same week my mother passed and I didn't get around to returning the one in time then found out I didn't need either one in the first place. Make an offer I'll do them for a good price

so you have obx lth did you had to do any mods other than tuning? ex: extending 02 sensor? or something else?

hey，im sheng，i want ask u how GT wing R u use ？

Hello,

would you meet half way from dulles at wheeling WV?
jb

EPS tuning

Hope they are not oem. You need those in the pic and the new allen screws vs phillips so they don't back out because they have more torque or a lockout washer or something included.

Ps you will need these

I wanted to bring up an important issue that I was recently made aware of. Like the comment I made in this thread about how you need to insure and properly package your return items, I want to keep...

No ice mode here running xp12/xp10 on RS-3's but after reading Dorans possible issue with the pads not releasing and understreer as a result might be my issue! My cars got horrible understeer and...

If you're doing a diy for others to follow, do it right! We don't need ghetto hacks to a 30k car. This is why 350's and civic get a bad name. Do it right or not at all.

They help! Ive heard others hit 300+ in a lap or two. Ive yet to see mine over 260* which is why i havent replaced my oem VLSD. If the oem silicone stays cool then the oem LSD should still...

Bent how?? If you bent your subframe the car would be a total loss! The control arms, rear knuckle, spring buckets etc would all have snapped off long before the subframe would bend in an accident....

Looks ghetto as hell like this.

Well I've seen a few gtr vents and custom vents and no reports of horrible coolant temp issues so I think we're all good. I mean has anyone here even got their coolant dots over half way? Only...

Is it just me or does it look like 1/3 of the bar was already damaged badly seeing how it has rust forming.

Here, my saved list is easier. Front -2.9 camber, 0.05* toe out, 6.5 caster Rear -1.8 camber, 0.05* toe in 3080lbs, 1750lbs front, 1330lbs rear, no corner balance yet 2013 Sport 6mt...

EDIT 5/11/18....all new prices as of today. Below now reflects this. I can also be reached on Facebook at Scott Thomas with a pic of my Z on the track. For Sale, custom ported intake...

Ill make one. Its very easy

Apr updated, old vs new Old... http://i39.photobucket.com/albums/e174/synolimit/Mobile%20Uploads/image_zpszjjeg9kz.jpg...