pbs370z

Hey man I noticed you have a lightened flywheel on your Z, how is it compared to your original flywheel. Noise chatter acceleration your over all impression if you don't mind. I wanna upgrade my clutch flywheel and diff and I wanna go to a lighter flywheel but I'm getting conflicting answers can you help me out?

Stay calm and lift the pedal with your toes :eekdance:

Nissa can kiss my azz

Any of you guys thought about going to your local news affiliate? I mean this is pretty serious, and here you have Nissan tap dancing, I say the hell with calling 1800 Nissan, let the news MAKE them...

I've spent a lil time researching the necessary parts to install an aftermarket Oil pressure gauge. Note: This is not a DIY This is only here to inform the community which adapter is required...

Master and Slave cylinders were replaced at 30k miles under warranty. ECM replaced as well in that time. Guess what? My clutch pedal only returns 40% of the way. I will never buy another Nissan...

:iagree: I have my K&N filters on and have had no issues for months after cleaning the throttle bodies. However, you have to be careful in how much you oil your filters, that will definitely mess...

For me, once I took the car out the dealership, it's never gone back. I had the same thing happen to me, and at around 30K I took apart the throttle bodies and cleaned them, no more problem so far. I...

You are not alone! Dealerships in my area will NOT install aftermarket HD CSC's. OEM CSC's are a 3-5 day wait at Nissan Dealerships here in Maryland area. There is a wait for HD CSC too, because so...

Good stuff man, nice purchase, Im looking forward to meeting up with Joe from Zspeed this friday, picking up my parts, and hopefully getting them installed somewhat soon. (fingers crossed). Pretty...

Here's the kit that I had Joe at ZSpeed install. I added the stainless line, Motul fluid and Quiet disk. I can really feel the difference in the midrange. Pulls much harder. ZSpeed Performance...

Call ZSpeed or Z1. Specialty Z has some of the worst customer service out there. Using their clutch cost me another $1500 between the rental car, additional labor, etc. They just rebadge a RPS clutch...

Hot or cold brake fluid doesn't matter, when the plastic O ring in the CSC fails, it fails. The reservoir will be empty and the fluid will drain out. The Service bulletin requires dealerships to...

Not sure if this was mentioned or not but I thought I'd add something. After removing the helper spring and re-installing all of the other OEM components (another small spring and what appears to...

AD08 yes they are very fast, probably faster than RE11. PSS, give me a break. I am sorry, if they are recommending PSS over the RE11 for pure dry performance purposes, they need to try both tires...

I just did this install and wanted to add a few things for you guys. First, the edge of the crash bar/bumper is like a razor, be careful around it. I grabbed a fine file and cut the edges of it so it...