overtureZ

It has not been repainted since the conversion was finished in March 2016. The hood, bumper, and fenders will need to be repainted. Mine is daily driver and accepted that it is part of deal. Everything else look great.

It's a rock chip magnet.

LOL. That's the way it is.

Hey man. Let me know what's going on and I'll see if I can offer any input. Let me know the specs of the car and what's going on. The biggest problem I had was the tps sensor and I insulated it with their "new" sensor that doesn't have the issue anymore.

Aside from that the O2 sensor throws codes for a bad cat if it goes bad but that just gives me a loss of HP sometimes if the sensor decides to be sassy. I went on a trip and my battery couldn't hold a charge which caused problems.

New sensor, new battery, new sensor, car back to new.

I'll be more active so I can get back to you.

When I was NA, I was at 315/268. I am still working through the tune on my SC build and then I'll be able to get some numbers up for it as soon as I can get to a dyno.

My side skirts are from the zele kit...we had to use thos to match up with the wide body kit because the amuse sides wouldn't jive with the fenders

I would probably save that $10k for a down payment for a used GTR!!!

I'm a firm believer in header wrap. When you switch to an aftermarket header you generally end up with more surface area than the stock headers, which means even more heat radiating off of them,...

This should be all you need bro it has the inserts and bumper with other options. Also you will need a new under tray, might as well upgrade to the aluminum z speed under tray (NON NISMO). Its so...

May need a fresh set of plugs; as the lean condition created a lot of extra heat,,, bank 2 (being the drivers side) gets air from the passenger side throttle body,,,you must have had a vacuum leak or...

Use the emergency release cable = free

Get an OBD/CAN monitor and watch the O2 values.

Mine did the same thing. Switched coil pack to confirm and it moved to 4. About $120 at AutoZone for a new one and all clear. Funny that number 6 seems to go out on a lot of cars. Sent from my...

Just to give a bit of an update.... I am shipping 6 kits out next week. Two additional orders came in the last 10 days, and those will more than likely ship out some time in the second half of...

I have installed a few Southbend clutches. Joe at Zspeed is your man for this. Give him a call, and he will set you up with one. I liked the Stage III daily so much on customers 370z's, I ordered...

Oil cooler and spacer is included. You'll need the clutch (and csc, flywheel also recommended), gauges, boost controller, a mile of header wrap, a radiator if you live in a hot climate, and a good...

I can do alot but I'm not a mechanic. I did my install with help from a friend that owns a shop. Everything I did was made easier with the lift but it was all 100% doable on stands at home. I made a...

:*:*:*:*:*sold:*:*:*:*:*:

I hate you Cali Z's, all the good deals are always there

Sorry bro because it........ https://media.giphy.com/media/aTQOKRbkHpm48/giphy.gif

sell you cats on ebay...350$+