Optimiser

Sent you an email

Hi there,
Sorry don't have those socail media accounts but you can email me at pcoptimiser@optusnet.com.au
My car is actually at Revzone now getting some more things done. happy to discuss with you.

Hey buddy, do you have discord or facebook?

Would like to chat you about your build. I'm from Australia buying the stillen supercharge kit with some upgraded components. Getting it tuned at Revzone next month.

Had a customer purchase the BP twin scroll turbo kit, but I had no idea he had already purchased and installed the Z1 CMC eliminator kit. So, he shoots me a text and tells me the manifold does not...

jimwolftechnology.com/wolfpdf/vq37camencoderslipped.pdf common failure on early cars that run the oil hot, part was redesigned 3 times

http://www.jimwolftechnology.com/wolfpdf/vq37camencoderslipped.pdf

Also ...using the stock cooler with the air to air cooler will help warm the oil in the winter ..on colder days 20-30 degrees it will maintain oil temp around 195-200 degrees

I have a 2017 and you can mount the oil coolers in the wheel well very easy ... I use the stock cooler and a 25 row ... works great

Sounds normal if it is cold and the car is cold. This can happen if it has just come off of fast idle to normal idle. I wouldn't be too concerned about it.

So I put the OEM oil cooler back in with the 25 row....with only the 25 row oil cooler I was around ~210 in 60 degree weather and it would increase to ~225 with aggressive driving ...After adding the...

If you have the factory nav then you can plug into it via the video input & run a carPC or other data system and view it through the Nav screen. Will look similar to this but not exactly as I did not...

http://www.the370z.com/members/girald-albums-my-gauge-install-misc-pics-picture100219-breaking-stuff-good-oem-gone.jpg ...

My suggestion would be to buy wheels with the proper offset. No spacers needed then. If you ever have seen a wheel come off due to a spacer issue, you would understand.

I just got off the phone with my mechanic. He pulled my sc today and spun the pulley by hand. He said that when spinning the pulley back and forth he can feel a slight clunking like bearing play....

I did the super vortech upgrade. I am running the 928 impeller but prior to the super vortech upgrade I had the Si wheel and after reviewing my dyno sheets, the Si impeller made boost quicker than...

Super late update but I ended up fixing my problem. Also posting to help out anyone with possibly the same issue they're having. It turned out to be my motor mounts. I've inspected the bushing...

Probably has a lot to do in how the clutch diff is setup. It can be an aggressive or a gentle depending on the spring and clutch selection.

That's not enough. Need to do 20 to 30min in the cold with some mild pulls. It sounds like you need to upgrade your diff to a Quaiffe, Wavetrac, or a OS Giken. That will help with it stepping out....