Optimiser

Sent you an email

Hi there,
Sorry don't have those socail media accounts but you can email me at pcoptimiser@optusnet.com.au
My car is actually at Revzone now getting some more things done. happy to discuss with you.

Hey buddy, do you have discord or facebook?

Would like to chat you about your build. I'm from Australia buying the stillen supercharge kit with some upgraded components. Getting it tuned at Revzone next month.

Have you considered grabbing a used one from a local junker?

Paint it black using plastidip, and then decide whether you like a two-tone or not.

My shop has been toying around with this new vinyl material lately. Finally got some time to wrap my own car! The finish is called "Supergloss Midnight Green" and you P-car nerds will notice the...

Why not just wrap your hood black? That would be inexpensive

It turns out that they moved the OBD Port to make room for a CAN Gateway. This device splits the CAN network into 3 parts (OBD Port, Infotainment & Normal). So it is no longer possible to capture...

After cleaning the rust off. Spray this under the car. CRC 06026 Heavy Duty Corrosion Inhibitor

You'll also want to search by site via google. The search function is terrible as the forum hasn't been updated in 12 years. :rofl2: https://i.imgur.com/nUypEuw.jpg

I see rotorex vs vortech

I didn't want to cut my hood either but some times you got to do what you got to do.

Still waiting on an answer…

Yes as I said I came from the walbro 255 and it was stupid loud (in my opinion). The walbro 255 is notoriously loud and is actually louder than their higher volume pumps. Google search it and...

So I went from the walbro 255 to these AEM pumps with the radium fuel hanger kit and so far no issues for me. Been about a month now. I was nervous of the lack of a barb but couldn’t stand the...

Drilling the regulator and venturi jet is a separate issue IMHO. While not drilling them will cause a fuel pressure spike at idle; 20-25psi in a line that small is relatively low pressure and should...

I punted on this project. I tried to get another place to weld the pipes but airflow was never perfect. Like everyone said. Was a great learning experience for sure. It was comparable to the Stillen...

Update, install went great. Smooth. No issues with seating the injectors. After the A-A upgrade, flywheel+clutch, and 1 size down on the S.C. pulley, trapped 455wHP (350z HR). At the point where my...