old guy

Nope.......just wrapped the empty plugs in plastic to prevent water getting in. I also bought gutter leaf guard at the big box store, (it's steel dipped in plastic, still looks good after years) to dress the empty holes. ( Cut to shape, and Installed from behind the facia with JB Weld. )

:hello: Night Folks, gotta get good & rested up :tiphat: Weekend road trip ahead :driving:

Well, I found this in the box that your brace came in. And I left it in the box.

just as I was walking away from the QX the sky fell out with a big time tropical downpour.. had to run to the apartment before I got drenched on... foooook.

i installed a direct wire in my QX right after work, had to pull apart the center console from the seats to the screen, first time doing it, managed to get everything done before it got dark..

:hello::hello:

I'm glad you cleaned that before you took a picture of it. :icon23:

Fresh rubbers for the Camry came in today :tup:

:google: A Yankee dryer is a pressure vessel used in the production of tissue paper. On the Yankee dryer, the paper goes from approximately 42–45% dryness to just over 89% dryness. In industry, MG...

What you missed?

Finally catched up :ugh2:

I'm half temped to tell them, "yea, go ahead and let it rip. The stock block will hold a 1000hp no problem. And you don't need anything else. " Then stand back and watch the show. :rofl2:

I wonder if the sperm bank will accept my JARfull :nutswinger:

Can we just sticky this in the FI section already?

If you "only" want to push 650whp, i dont know if its worth it to go the mazworx route. No clue what Spooler paid but id be surprised if its anything below 15-20k. I run 602 whp on E85 with stock...

Weakest link. Headgaskets! And head gaskets did we mention head lift. I went with mazworx sleeved and step deck route