MotorvateDIY

I'm glad to hear that!
Thanks for the comment.

Your videos have been a major help when repairing/ replacing parts on my car. Thanks again !

Thanks for dropping in.

If you like to work on your 370z or want to learn how to... please check out my 370z / G37 Sport Sedan youtube channel: http://youtube.com/motorvatediy

The 370z and G37 Sport are mechanically very similar. Want to know how to bleed your brakes or clutch, change brake pads, or how about fix a ruptured diff bushing in 20 minutes for $20.... Then check out my channel.

The videos are professionally produced thanks to support from the eLearning company SpurGear.ca

Also, if you want to learn more about OBD, please have a look at my other channel:
OBD4Everyone https://www.youtube.com/OBD4Everyone


Thanks for stopping by!

Here is the setup I've been using for the last 18 months: http://www.the370z.com/attachment.php?attachmentid=152930&stc=1&d=1704719764 I don't like the "long T trees" as they vibrate like a...

Thanks for this info and I'll keep that in mind. Next spring summer, I hope to record a few 370z CAN bus to see what the ABS module is sending out. FUN FACT: The 2018+ 370z have an OBD gateway...

Thanks for this info and I'll keep that in mind. Next spring summer, I hope to record a few 370z CAN bus to see what the ABS module is sending out. FUN FACT: The 2018+ 370z have an OBD gateway...

Did you know the Nismo Z has a different ABS module than the rest of the 370s? ... and it might be much better? The non-Nismo ABS module only broadcast the "side g" values (corning g forces) on...

Great question! Based on the part Number I gave (6MT: 47660-3GM3B, 7AT: 47660-3GM1B) those are listed as valid for June 2014+ production, so that would mean V2. If I can get a CAN bus log from a...

Great question! Based on the part Number I gave (6MT: 47660-3GM3B, 7AT: 47660-3GM1B) those are listed as valid for June 2014+ production, so that would mean V2. If I can get a CAN bus log from a...

Seems odd to quote myself.... Anyways, here is a small update: This afternoon, I assembled the CAN bus sensor server and programmed it. It reads the analog sensor input, (pressure, temperature or...

Here is what I use on my G37: http://www.the370z.com/attachment.php?attachmentid=152671&stc=1&d=1696619979 It uses the "GTR MFD gauges" that are part of the navigation system in 2010-2013 G37,...

EcuTek is going to be adding CAN bus sensor input to the VQ37 platform. This will allow oil pressure monitoring and RPM reduction to protect the engine. It will also allow ethanol content, fuel...

Here is what I use on my G37: http://www.the370z.com/attachment.php?attachmentid=152671&stc=1&d=1696619979 It uses the "GTR MFD gauges" that are part of the navigation system in 2010-2013 G37,...

Other than this post, I haven't mentioned it. Normally, I like to have a running prototype before I say anything. However, since I was getting some other circuit boards made, (GTR Converter!!!),...

EcuTek is going to be adding CAN bus sensor input to the VQ37 platform. This will allow oil pressure monitoring and RPM reduction to protect the engine. It will also allow ethanol content, fuel...

EcuTek is going to be adding CAN bus sensor input to the VQ37 platform. This will allow oil pressure monitoring and RPM reduction to protect the engine. It will also allow ethanol content, fuel...

EcuTek is going to be adding CAN bus sensor input to the VQ37 platform. This will allow oil pressure monitoring and RPM reduction to protect the engine. It will also allow ethanol content, fuel...

EcuTek is going to be adding CAN bus sensor input to the VQ37 platform. This will allow oil pressure monitoring and RPM reduction to protect the engine. It will also allow ethanol content, fuel...