MotorvateDIY

Your English is good, don't worry about it.

As for the GTR gauges, two days ago the local beta test stated on a 2011 G37. So far, so good! Once the G37 testing proves things are good, then I'll start on the 370

Hi, I came across your YouTube videos, you are a genius, thank you very much, I really like the interface from GTR. I am from Bulgaria (Europian Union) I have a 2016 370Z imported from Canada, I am following your project, I am interested in modifying it when it is ready. Thanks you share your work with us. Good luck in your work.(sorry for my english)

I'm glad to hear that!
Thanks for the comment.

Your videos have been a major help when repairing/ replacing parts on my car. Thanks again !

Thanks for dropping in.

If you like to work on your 370z or want to learn how to... please check out my 370z / G37 Sport Sedan youtube channel: http://youtube.com/motorvatediy

The 370z and G37 Sport are mechanically very similar. Want to know how to bleed your brakes or clutch, change brake pads, or how about fix a ruptured diff bushing in 20 minutes for $20.... Then check out my channel.

The videos are professionally produced thanks to support from the eLearning company SpurGear.ca

Also, if you want to learn more about OBD, please have a look at my other channel:
OBD4Everyone https://www.youtube.com/OBD4Everyone


Thanks for stopping by!

Here is what I use on my G37: http://www.the370z.com/attachment.php?attachmentid=152671&stc=1&d=1696619979 It uses the "GTR MFD gauges" that are part of the navigation system in 2010-2013 G37,...

EcuTek is going to be adding CAN bus sensor input to the VQ37 platform. This will allow oil pressure monitoring and RPM reduction to protect the engine. It will also allow ethanol content, fuel...

Here is what I use on my G37: http://www.the370z.com/attachment.php?attachmentid=152671&stc=1&d=1696619979 It uses the "GTR MFD gauges" that are part of the navigation system in 2010-2013 G37,...

Other than this post, I haven't mentioned it. Normally, I like to have a running prototype before I say anything. However, since I was getting some other circuit boards made, (GTR Converter!!!),...

EcuTek is going to be adding CAN bus sensor input to the VQ37 platform. This will allow oil pressure monitoring and RPM reduction to protect the engine. It will also allow ethanol content, fuel...

EcuTek is going to be adding CAN bus sensor input to the VQ37 platform. This will allow oil pressure monitoring and RPM reduction to protect the engine. It will also allow ethanol content, fuel...

EcuTek is going to be adding CAN bus sensor input to the VQ37 platform. This will allow oil pressure monitoring and RPM reduction to protect the engine. It will also allow ethanol content, fuel...

EcuTek is going to be adding CAN bus sensor input to the VQ37 platform. This will allow oil pressure monitoring and RPM reduction to protect the engine. It will also allow ethanol content, fuel...

If you have a newer laptop with a USB C port, you can use the standard USB C to USB A cable to reconfigure the nav unit. I never thought about this, as my 8 year old Mac Pro only has USB A....

MikeUCFL: Thanks for sharing your experience with enabling the Tire Pressure menu! I thought about making a post here, but I didn't have any proof that it works on the 370, even though the 370z uses...

Sept Update: There has been a fair amount of progress on the GTR gauges. The hardware has been finalized and I now have 20 circuit boards back from manufacturing. Over the next week I'll be...

Sept Update: There has been a fair amount of progress on the GTR gauges. The hardware has been finalized and I now have 20 circuit boards back from manufacturing. Over the next week I'll be...

Sept Update: There has been a fair amount of progress on the GTR gauges. The hardware has been finalized and I now have 20 circuit boards back from manufacturing. Over the next week I'll be...

MikeUCFL: Thanks for sharing your experience with enabling the Tire Pressure menu! I thought about making a post here, but I didn't have any proof that it works on the 370, even though the 370z uses...

Sept Update: There has been a fair amount of progress on the GTR gauges. The hardware has been finalized and I now have 20 circuit boards back from manufacturing. Over the next week I'll be...