![]() iDaRkkO
|
Last Activity: 05-25-2026 08:24 AM
- User Lists
About Me
- About iDaRkkO
- Location
- Maryland
- Drives
- 13 370z Pearl White
-
Signature
- 13' Z "Pearl"
AEM | Quaife | 4.08 | Stillen | Hotchkis
Likes Given
105 Likes
-
iDaRkkO liked post by OptionZero On thread : F18x19 R18x10.5Stop Keep your stock **** Save Do it rightLiked On: 02-23-2017, 02:41 PM
Posted On: 02-22-2017, 11:12 PMiDaRkkO liked post by OldFart On thread : Whats your method when you downshiftI don't have a set rule for when to downshift, depends on tbe situation. If in 6th and coming to a stop downshifting from 6th to 1st in my opinion is a pita. If you get a chubby from hearing your...Liked On: 02-22-2017, 02:59 PM
Posted On: 02-22-2017, 01:14 AMiDaRkkO liked post by jaytirbhaw On thread : NYC Winter Storm - 2014 370z wont startWait, how do you turn the heat on with the engine off ? It's probably your battery. Ps- this snow was crazyyyLiked On: 02-10-2017, 02:38 PM
Posted On: 02-09-2017, 08:32 PMiDaRkkO liked post by osbornsm On thread : Ask Me Anything!!Elevendy billion gumballs. +1 rep if you know what that's from (without searching)Liked On: 01-25-2017, 02:01 PM
Posted On: 01-25-2017, 01:49 PMiDaRkkO liked post by mousewei84 On thread : Small incident on track to share and learnThis is the mark of my 14th track day where I have to "learn" how to save from my errors. Luckily fast reaction saved the car since palmer is the most unforgiving track I've run so far. More...Liked On: 01-09-2017, 02:51 PM
Posted On: 01-08-2017, 10:30 AMiDaRkkO liked post by cooltoy On thread : Cheap, bootleg, eBay exhaust, I'm fine with that.Time will tell all.Liked On: 01-01-2017, 02:08 PM
Posted On: 12-31-2016, 01:38 PMiDaRkkO liked post by jchammond On thread : Quaife LSD Headacheom my Quaife....when you rotate the driveshaft,both wheels tirn the same direction....someone can hold one tire & you can turn the other one with some effort...that's the helical gears working...Liked On: 10-23-2016, 08:29 PM
Posted On: 10-23-2016, 07:57 PMiDaRkkO liked post by B&W_Evader On thread : Quaife LSD HeadacheAwesome! Cudos for doing the job yourself! Don't forget to check backlash and pinion spacing with the indicator grease to make sure the gears are meshing correctly. You'll chew up your gears...Liked On: 10-19-2016, 06:27 PM
Posted On: 10-19-2016, 10:02 AMiDaRkkO liked post by BGTV8 On thread : How to turn off vdc completelyNo fuses to pull. Simply insert a switch into the power wire to the yaw-sensor and VDC is disabled entirely. You continue to have the benefit of ABS. No fuses need to be pulledLiked On: 10-15-2016, 11:40 AM
Posted On: 10-14-2016, 01:24 AMiDaRkkO liked post by makugx On thread : How to turn off vdc completelyI found this through research. "This will disable VDC, TCS, AND ABS!! So, BE CAREFUL! I want to stress that this should only be done for track use and then only by experienced drivers! I did...Liked On: 10-15-2016, 11:39 AM
Posted On: 10-14-2016, 12:17 AMiDaRkkO liked post by scope22 On thread : Frustrated to no end going from 1st to 2nd...1. Get RJM Clutch Pedal if still not happy 2. Turn off rev matching if still not happy 3. Get light weight flywheel if still not happy 4. Get urathane tranny mount if still not happy 5. Get...Liked On: 09-28-2016, 10:25 AM
Posted On: 09-26-2016, 08:53 PMiDaRkkO liked post by Rusty On thread : Frustrated to no end going from 1st to 2nd...:iagree: Mine has been gone since I bought the Z.Liked On: 09-28-2016, 10:23 AM
Posted On: 09-26-2016, 06:57 PMiDaRkkO liked post by ayrton88 On thread : Frustrated to no end going from 1st to 2nd...Don't get frustrated....it will come. I'm 65 years old and have been driving manuals since I was 16, including some god awful ones, and the Z took me awhile to get used to it. It is not very...Liked On: 09-28-2016, 10:22 AM
Posted On: 09-26-2016, 05:01 PMiDaRkkO liked post by Hotrodz On thread : Frustrated to no end going from 1st to 2nd...This ^^^I took mine out years ago and never looked back! Sent from my SM-N910P using TapatalkLiked On: 09-28-2016, 10:21 AM
Posted On: 09-26-2016, 04:37 PMiDaRkkO liked post by NickD On thread : Carbon fiber partsProbably shouldnt be promoting for a non site sponsor here especially in someones for sale thread. P.S. their products look cheap like paper carbon which i'm sure is why their prices are low.Liked On: 09-17-2016, 06:29 PM
Posted On: 08-22-2016, 10:58 AM
All times are GMT -5. The time now is 08:44 PM.




Likes Received