gomer_110

Do you have any suggestions for spring rates? I am running motion control non-remote 2 ways with 12kg front and 10kg rear(stock location). Feels really soft to me and i get a lot of body movement. Rear seems pretty loose as well, i removed my rear sway and have 1/16th toe total. I plan on upgrading to the new tomei 1.5 lsd. In my current setup i overpower the sports oem lsd all the time on tight corners.

Thanks again.
Ryan

Having a hell of a time finding suspension settings to run the nismo 19x10.5 et23 wheels with 285 tires square. I found stuff of people using the rims but with smaller tires and no camber angles listed. I plan on running this setup in autox for stu class. Thanks

What was the cost of parts and install for clutch, CSC and flywheel upgrade, if you don't mind me asking?

Hi I have seen ya putting ur sway bars from eibach . And my question is "Are the nismo sway bars not good enough or you are looking at the better handling with eibach?" I think u did front and rear right. I went to a track race a couple weeks ago(my first time). wat happened to me was my nismo was stripping because I was on high speed then brake to make a hard corner. My rear wheels spin twice and I think it's partly cause of my sway bars. I am here to learn so your information would be super helpful. Thanks

Hi, just wanted to say hi. I'm in BG, if you're ever in the area hit me up or if there are any events in Toledo to gather. Thanks.

There's only two tuning options for the 370z that are worth anything, Ecuteck and UpRev. Both use PC software and are NOT a "hand-held" tuner.

There's only two tuning options for the 370z that are worth anything, Ecuteck and UpRev. Both use PC software and are NOT a "hand-held" tuner.

thirteen

Turn on spot metering. Had the exact same thing happen when I'd record autox runs. After I changed to spot metering the issue went away. Here's a couple videos with spot metering turned on. ...

Not remote res and no, they are not for sale. The AST dampers seemed to offer more damping than the factory dampers. Additionally, each click on the adjuster creates a clear and noticeable...

Resistors from Digikey (http://www.digikey.com/product-detail/en/vishay-bc-components/NFR25H0004708JR500/PPC4.7BCT-ND/614264) Always had good luck with stuff from Digikey. I have used them a...

Article seems to make a few assumptions that don't apply in our case. Honestly if you don't have to worry about emission checks skip the HFC's and go with test pipes or long tube headers.

Leave the rear bar alone. There's a reason almost nobody uses the rear Hotchkis bar, it's way too stiff.

http://starecat.com/content/wp-content/uploads/if-you-ever-feel-useless-remember-that-somebodys-job-is-to-install-turn-signal-systems-at-bmw-indicators.jpg

http://starecat.com/content/wp-content/uploads/if-you-ever-feel-useless-remember-that-somebodys-job-is-to-install-turn-signal-systems-at-bmw-indicators.jpg

http://starecat.com/content/wp-content/uploads/if-you-ever-feel-useless-remember-that-somebodys-job-is-to-install-turn-signal-systems-at-bmw-indicators.jpg

http://starecat.com/content/wp-content/uploads/if-you-ever-feel-useless-remember-that-somebodys-job-is-to-install-turn-signal-systems-at-bmw-indicators.jpg

Go with the AST setup. You won't regret it.

Go with the AST setup. You won't regret it.

Schroth https://www.schrothracing.com/