gomer_110

Do you have any suggestions for spring rates? I am running motion control non-remote 2 ways with 12kg front and 10kg rear(stock location). Feels really soft to me and i get a lot of body movement. Rear seems pretty loose as well, i removed my rear sway and have 1/16th toe total. I plan on upgrading to the new tomei 1.5 lsd. In my current setup i overpower the sports oem lsd all the time on tight corners.

Thanks again.
Ryan

Having a hell of a time finding suspension settings to run the nismo 19x10.5 et23 wheels with 285 tires square. I found stuff of people using the rims but with smaller tires and no camber angles listed. I plan on running this setup in autox for stu class. Thanks

What was the cost of parts and install for clutch, CSC and flywheel upgrade, if you don't mind me asking?

Hi I have seen ya putting ur sway bars from eibach . And my question is "Are the nismo sway bars not good enough or you are looking at the better handling with eibach?" I think u did front and rear right. I went to a track race a couple weeks ago(my first time). wat happened to me was my nismo was stripping because I was on high speed then brake to make a hard corner. My rear wheels spin twice and I think it's partly cause of my sway bars. I am here to learn so your information would be super helpful. Thanks

Hi, just wanted to say hi. I'm in BG, if you're ever in the area hit me up or if there are any events in Toledo to gather. Thanks.

Get some used sport calipers and have Mike powder coat them. He can do any color you want.

If you have to finance it, chances are you can't afford it.

PLEASE keep these types of topics off the forum IF they are not clearly defined as at legal sanctioned event/track Keep it to FB IG as where stupidity runs wild. PLEASE READ THE FORUM RULES...

Yo gais I went so Kool today and plastidip my badges and blacked out my headlights. Gonna add spacers tomorrow if it doesn't rain. Big shout out to krazzzz cause he suggested cutting Springs...

Its fun how you think that was directed towards you. :owned: The safe place is all ready for you to go into though. Seems to me, you were triggered at a simple meme that had no direction towards...

And this is why older members hate the fact that the resale value of these cars has dropped enough to let in the riffraff.

The Great Z is still..... It's the low rent used car buyers with that "I live a quarter mile at a time" attitude killing this forum. I know not every used car purchaser is a poser. Not saying...

Minor correction to what was said here...everything else makes sense. 18's looking crappy on a Z is totally subjective though (I love my 18x10 VMR 810's). Although this sounds counter intuitive,...

Dude, recalibrate your sarcasm detector. :tup:

u might need a more robust pair of endlinks.. but da car doesnt need a stiffer rear bar.. just the front.

What happens alot of times when removing and installing O2 sensors. They don't like being abused. On the rear O2 sensors where you have to extend the wires. You have to solder the wires together. If...

Make sure you get there early, check everything on the car over again (torque lug nuts, check tire pressure, etc), and walk the course a bunch of times with someone who has done it before. You'll...

Okay, where are the dyno results?

You have FI long tube headers? Then you don't need test pipes.

http://www.writeups.org/wp-content/uploads/Hong-Kong-Phooey-Hanna-Barbera.jpg