Girald

Hey Girald,

Love your gauge pod setup, was wondering if you had a walkthrough on how you did it?

Hey Girald,

Sliver Exhaust Duo Layer Straight Cut Polished Stainless Tip 2.5"In 4"Out

Dimensions:
Inlet: 2.5 Inch (63 mm)
Outlet: 4 Inch (102 mm)
Total length: 11 Inch (265 mm)
Width: 8 Inch (203 mm)

Specs:
Made of Premium Quality T304 Stainless Steel Exhaust Tip
Color: Sliver Tips
QTY: 2
Duo Outlets
Duo Layer
Polished Surface
Straight Cut
Weld-on Typ

honestly, between the custom work and Fast Intentions exhaust just go for the Zele exhaust system. You will spend the same amount of money in the end.

Thank you for sharing your experiences. I am sure this will help others in the future. Glad you are happy the way it is running now!

These are all taken from the same position; from the left, at the left hood pin: ...

FWIW, when ordering the parts from CJM it may be worth while for many to go ahead and purchase his billet top hat as well, as the oem top hat is plastic and prone to getting brittle and breaking :ugh:

i just cut a flat bar and welded some D rings to it, bolted it to the lower intake manifold

Here is a link!!! http://www.the370z.com/nissan-370z-owners-manual-service-manuals/2849-2009-370z-service-manual-complete-ready-download.html

If you're doing a diy for others to follow, do it right! We don't need ghetto hacks to a 30k car. This is why 350's and civic get a bad name. Do it right or not at all.

Pin 102 the gray wire (EVAP pressure sensor) on the ECU is an input and would be used for your Flex fuel data line. There are two solenoids that are related to the EVAP system there is the Canister...

I've done that, it's safe, as a reclining seat can be. The submarine strap's attachment point is the body of the car and that's where all the forces will be exerted onto, the seat bottom is just...

Thanks that’s the answer I was looking for to justify the added cost!

I was getting PM's about the switches I used on my interior light install so I thought I'd just post the info here too if anyone needed a source. Switch Panel on console...

Hey brother, This is what I decided today to do for mine. I am adding this at the oil cooler. JEGS Performance Products 110530 JEGS Fuel Pressure Gauge In-Line Adapter Fittings...