![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() gbrettin
|
Last Activity: 05-14-2026 12:45 PM
- User Lists
Likes Given
3929 Likes
-
gbrettin liked post by Rusty On thread : Bell Raceworks Diff Brace InstallSomeone at Z1 read my review and buried it. I hoping some good will come out of my e-mail. He now knows about this thread. So, let's see what comes out of it. I'll up-date this thread when I get a...Liked On: 03-08-2020, 12:53 PM
Posted On: 05-25-2019, 09:53 PMgbrettin liked post by redondoaveb On thread : Bell Raceworks Diff Brace InstallLooks great! :driving:Liked On: 03-08-2020, 12:50 PM
Posted On: 02-14-2019, 11:51 PMgbrettin liked post by Rusty On thread : Bell Raceworks Diff Brace InstallInstall the brace to the diff. Leave the bolts loose so that you can wiggle the brace a little to help getting the bolt started into the nut piece 1st pic, I put the nut piece on my wrench and put...Liked On: 03-08-2020, 12:50 PM
Posted On: 02-14-2019, 11:19 PMgbrettin liked post by Rusty On thread : Bell Raceworks Diff Brace InstallThe diff brace is installed. :tup: 1st and 2nd pic's. This is the nut piece that goes in the sub-frame. 3rd pic is where it goes. 4th pic. Here's looking at the hole from where the spring...Liked On: 03-08-2020, 12:50 PM
Posted On: 02-14-2019, 11:12 PMgbrettin liked post by Rusty On thread : Bell Raceworks Diff Brace InstallHere's a good pic of the diff and sub-frame. You could make a brace that's goes over the top of the diff, top 4 bolt holes. and bolt to the top of the sub-frame. That would really lock the diff into...Liked On: 03-08-2020, 12:49 PM
Posted On: 02-13-2019, 09:54 PMgbrettin liked post by cv129 On thread : Bell Raceworks Diff Brace InstallJeebus, this was supposed to be a simple bolt-onLiked On: 03-08-2020, 12:49 PM
Posted On: 02-13-2019, 09:28 PMgbrettin liked post by Rusty On thread : Bell Raceworks Diff Brace Install1st and 2nd pics. All welded up. Welds dressed down. Hole redrilled to new location. 3rd pic. Brace installed. holes align up. You can see the gap. 4th pic. Here's the bend that has to be...Liked On: 03-08-2020, 12:48 PM
Posted On: 02-13-2019, 09:02 PMgbrettin liked post by Rusty On thread : Bell Raceworks Diff Brace Install1st and 2nd pic's. Prepped the brace for welding. 3rd pic. My 1/2" thick copper backup bar. I use this to keep the welding puddle from dropping out. 4th, 5th and 6th pic's. Welding up the...Liked On: 03-08-2020, 12:48 PM
Posted On: 02-13-2019, 08:51 PMgbrettin liked post by Spoiler On thread : Bell Raceworks Diff Brace InstallAll you can do is be honest... and sounds like you were...Liked On: 03-08-2020, 12:46 PM
Posted On: 01-31-2019, 06:21 PMgbrettin liked post by Rusty On thread : Bell Raceworks Diff Brace InstallJust seen this on the Z1 website. "Thank you for your review. It has been submitted to the store owner for approval and should appear shortly."Liked On: 03-08-2020, 12:46 PM
Posted On: 01-31-2019, 03:45 PMgbrettin liked post by Rusty On thread : Bell Raceworks Diff Brace InstallThis is the review that I'm posting again. :icon14: If you have exhaust like FI that are close to the diff. This brace won't fit unless you trim about 1 3/8" on the corner of the brace. The other...Liked On: 03-08-2020, 12:45 PM
Posted On: 01-31-2019, 03:42 PMgbrettin liked post by Rusty On thread : Bell Raceworks Diff Brace InstallThis is what I had to cut off for clearance on the exhaust pipe. :mad: Not a lot of metal left for strength after trimming. :mad:Liked On: 03-08-2020, 12:40 PM
Posted On: 01-30-2019, 07:12 PMgbrettin liked post by FireDan50 On thread : Dan's VSR top-mount turbo 370 v3.0Haven't updated this in a while because I haven't really been doing anything. Just been trying to maintain the car and keep it running no problems...just realized a lot of the pic links to some posts...Liked On: 03-06-2020, 08:33 PM
Posted On: 03-05-2020, 06:58 PMgbrettin liked post by SurfDog On thread : Surfdog’s 71 240Stub axle refurbishment. I could run CV axels which are stronger and lighter but these will probably suffice and CV conversion runs about 1100 bucks. I’ll swap them in if these detonate ...Liked On: 03-04-2020, 10:58 PM
Posted On: 03-03-2020, 06:05 PMgbrettin liked post by SurfDog On thread : Surfdog’s 71 240Building this 3.2 motor, I bought this e88 head to replace my e31. Supposedly the e88 will flow better on the L28 stroker block. (According to the guy who’s helping me design my 3.2). They look...Liked On: 03-04-2020, 10:58 PM
Posted On: 03-02-2020, 09:02 PM
All times are GMT -5. The time now is 03:18 PM.





Likes Received