fryzia23

Hey sorry to bother you did your driveshaft do the same thing as mine?

been good bro, getting into autox more this year lol....i need to get an oil cooler and new brakes before i tried to tackle any track, hopefully soon i can have that done to do it

We should try to meet up one day and do a cruise, haven't really planned anything much this past few years lol but now theres more Z's so lets see

Hey bro! how you been? There's an autox event next saturday in meadowlands you should come thru

yeah there is one on the 6th next saturday but I cant make it unfortunately. If you wanna go to the one on the 14 make sure you register asap bc its limited to 80 cars and may fill up soon. MSNE/BMW club are doing the event together. Go to this website, make the account, add your car and register for MSNE event.
MotorSports North East ( MSNE ) - Autocross - HPDE -

oh crap you are right lol, i looked at the wrong dates hahaha, i know theres one in metlife next saturday but didn't know there was one on sunday the 14 as well

Actually I went to AC last weekend for an autox event lol...That was my first time doing it and now i'm "hooked" lol there's going to be one next week in AC again on Sunday, that I'm planning on going. Lets go bro! I'm going to post it to see if we get more Z's to come like you said

hey bro! haven't seen you in a while lol...you should come to our bear mountain cruise this saturday, we're doing it with the NJ Z Car Club

Hey! I just saw u answer me lol I don't get notifications if u write on ur own wall hahaha...it was a nice to meet u bro! Let us know when they have those meets on Thursday!

at meadowlands nissan right? Yeah that was my car

Nice car! did you went to the Z Club car show back in September 2013? I think I saw a car like it before lol

Welp. I certainly believe the culprit is the coil. I swapped it to #3, cleared codes, and immediately got a #3 misfire now. Ordered a replacement coil pack to swap in. I do appreciate the help.

Will get this updated over the weekend, what happened to September :(

Austins Z | Austin Hertel | 315 Nexen SportR | 2:30.326 | https://www.youtube.com/watch?v=8lLo-7QUEQk Road America Pro course Lap was a race lap. Done at 260whp/3600lb. comp weight. So close to...

Wanted to document this here for others in case they run into a similar issue. I run the Topgunz Rotrex kit and flex fuel and Eugene was seeing the ECU having to overcomensate for fueling due to...

'WINNER WINNER - CHICKEN DINNER!' Just got the news back from the dealer and yup yup - the whole compressor went out along with the AC clutch. Just thought I would update everyone just incase...

DARKJAX and fryia23, nice runs, sorry I am late... too much homework for next track days :)

Hey all, not sure if anyone cares but in case someone in the future needs to know, I did find and fix the issue. The harness was damaged around the passenger turbo area, it didn't have the...

Build done, first start (but MP4 is too big to attach). Just waiting on dyno operator and tuner to return from summer break and we'll put a tune into it and then we are off testing.

The Good Z1 Starvation kit works, ran out of gas at Barber Motorsports Park Finding a shop I could trust to work on my Z, I'm mechanically inept experience 2 new tracks in the Z ...

Did you visually inspect the crank sensor for damage since the cluth failed? I know it's a pain to get to but pull it for a visual inspection. The cam shaft codes in the situation are most...

Nope.

That's not an aluminum dampener. Looks to be the stock 370Z dampener. Personally I've never had an issue with any Nissan pulley. My M18 Milwaukee takes it off in 2 seconds and you don't even need...

Managed to get it off. I cut through the flange on the bolt and could remove the bolt with my fingers. I then had to grind some flat spots on the rear of the broken pulley for the fingers of my...

I’ll order for him, just PayPal F&F me the cash.

Been a while since I posted anything but I felt it made sense to share this. First of all this is not a DIY and expect do to a little cutting/ massaging to make this work. But I was looking at...