ban25Enthusiast Member |
Last Activity: 10-26-2020 10:31 PM
- User Lists
Visitor Messages
Showing Visitor Messages 1 to 3 of 3
-
You can still turn it all the way off, just set it to the lowest setting, which will disable traction control entirely. Note that there's still ABS functionality, including "ice mode". The only way to disable that is to cut the yaw sensor (there's a DIY for it). With it on, the car will understeer when trail braking because the system is applying the rear brakes to try and straighten the car. Long story short, just don't trail brake
-
Yea so I got that part but what I was confused about and can't seem to get a solid answer was about the stability portion of the VDC. It seemed from factory with VDC off all stability was off to the point you could spin a 360 and there would be no stability assist to straighten you out (as was tested doing the VDC off test at leguna "warm up" figure 8 in parking lot. So with ecutek VDC off I know wheel "slippage" is now tunable but what happens with the stability assist portion? With VDC on it will use yaw and steering angle to do selective braking to help keep you straight but what about when off now? I haven't been able to go find an empty lot to go play around it and get a feel for it yet.
-
Hey so I got my tune and still adjusting to the quicker throttle but I think I like it, need to give it a couple days before I know. I have asked Seb about the VDC thing a couple time but I am still not completely sure I understand it. Since you have the same thing and go to some of the same tracks I plan to, can I ask you a bit more about it vs Oem?
About Me
- About ban25
- Location
- SF, CA
- Drives
- 17 C7 Z06 M7
-
Signature
- 2017 Corvette Z06 7MT | 1LE | Stage 3 | DSCSport
Likes Given
169 Likes
-
ban25 liked post by Hotrodz On thread : ban25's Track JournalRight on! Make sure you post up some videos for us to enjoy.:driving:Liked On: 07-03-2017, 02:24 PM
Posted On: 07-02-2017, 11:42 AMban25 liked post by Hotrodz On thread : ban25's Track JournalWhat a beauty, I have been wondering why you have been so silent! Have you had her on the track yet?Liked On: 07-01-2017, 01:36 PM
Posted On: 07-01-2017, 12:04 PMban25 liked post by Total D On thread : GB: SuckerPunch Motorsports Oil Pump Upgradehttps://i.ibb.co/pJLd39n/IMG-20190903-221212-061.jpg (https://ibb.co/cDrQN7x) SuckerPunch Motorsports LLC Billet HR/VHR Oil Pump with Billet Gears and Billet Back Plate For some time...Liked On: 02-18-2017, 05:19 PM
Posted On: 02-17-2017, 08:55 PMban25 liked post by Total D On thread : Billet Oil Pump Gears and Backing Plate - Group Buy Interest??New thread will be started tomorrow with pricing!Liked On: 02-17-2017, 12:00 AM
Posted On: 02-16-2017, 11:50 PMban25 liked post by 1cintron On thread : AAM Competition VQ37 Intake Manifold Pre-sale!!!Patrick, the piece quality is pretty "rough". Even if you were to get it powder coated, it requires a good amount of prepping. The one I receive has lots of dings at least. ...Liked On: 02-15-2017, 01:28 AM
Posted On: 02-14-2017, 09:15 PMban25 liked post by Rid3_FaM0uS On thread : RiD3_FaM0uS's Journey to 850+whp Build ThreadEngine Build So I guess I had better get on with the good stuff huh? I think I've kept people at bay long enough. some of you may have seen my photos floating around; I've had them uploaded for...Liked On: 02-12-2017, 04:28 AM
Posted On: 08-20-2014, 01:42 PMban25 liked post by Total D On thread : Billet Oil Pump Gears and Backing Plate - Group Buy Interest??And we finally begin!!!! http://i1347.photobucket.com/albums/p705/Jeremiah_Heidner/20170210_131837_zpsqqlftnmx.jpgLiked On: 02-12-2017, 02:41 AM
Posted On: 02-11-2017, 08:28 AMban25 liked post by Total D On thread : Billet Oil Pump Gears and Backing Plate - Group Buy Interest??http://i1347.photobucket.com/albums/p705/Jeremiah_Heidner/20170131_180853_zpsd1wz4r2j.jpg http://i1347.photobucket.com/albums/p705/Jeremiah_Heidner/20170131_180920_zpsvykncch7.jpg ...Liked On: 01-31-2017, 10:42 PM
Posted On: 01-31-2017, 08:54 PMban25 liked post by Total D On thread : Billet Oil Pump Gears and Backing Plate - Group Buy Interest??Right there with you! Been a long time in the making, but it'll definitely be a nice upgrade for the VQ37 owners.Liked On: 01-31-2017, 10:40 PM
Posted On: 01-22-2017, 06:17 PMban25 liked post by DatsunFTW On thread : DatsunFTW JournalAlso drove over to Soho Motorsports in Charlotte to get a tune for the new motor. Not a bad dyno for minimal power mods. We also raised the limiter to 8k thanks to the oil pump gears from RJM. ...Liked On: 01-22-2017, 04:16 PM
Posted On: 01-19-2017, 09:50 PMban25 liked post by Total D On thread : Billet Dry Sump VQ37VHRNo, afraid not. However you'll still save some compared to the Nismo and get more from our pump, than you would from the Nismo. We worked off a Nismo pump, that's why I know we stepped it up.Liked On: 01-22-2017, 04:08 PM
Posted On: 01-21-2017, 03:35 PMban25 liked post by Total D On thread : Billet Dry Sump VQ37VHRMy billet gear pumps for the VQ35 are spinning to 8600rpms at 6bar. I have the VQ37 being working on right now. These will be drop in gears with something a little extra. If you guys decide not to go...Liked On: 01-22-2017, 01:23 AM
Posted On: 01-20-2017, 04:20 PMban25 liked post by Total D On thread : Billet Oil Pump Gears and Backing Plate - Group Buy Interest??A little teaserLiked On: 01-21-2017, 10:42 PM
Posted On: 01-20-2017, 05:17 PMban25 liked post by Elmo370z On thread : Billet Dry Sump VQ37VHRWe will see, My buddy installed them on his Z but his redline is only to 8k, power drops off after 7,500Liked On: 01-20-2017, 01:18 AM
Posted On: 01-19-2017, 06:18 PMban25 liked post by mousewei84 On thread : Small incident on track to share and learnYup one thing i learned is, don't be afraid of "gardening" as long as it is under control.Liked On: 01-18-2017, 12:15 PM
Posted On: 01-08-2017, 05:59 PM
All times are GMT -5. The time now is 08:15 AM.