YzGyz's turn!

YzGyz

I cut the 90 ell and fixed the super low hanging charge pipe. It is still hanging a lot lower than I would like it to be. I will test it once I am able to start the car and drive over a 2x4 a few times while looking at the clearance.

The FMIC was a booger to mount. I had tried to drill it freehand and but the new holes overlapped the old holes partially. I botched that part up so I got mad and bought a drill press and unibit. I clamped her down with 2 C clamps and drilled her nice and clean.

The OEM metal part that sits above the FMIC was a lot weaker with the crashbar and brackets removed. My brother and I hunted around HD and found some beefy metal shelf hangers and cut them up into a "L" and drilled holes matching the FMIC. Now the OEM metal is nice and supported.

I also got the vacuum hoses ran and secured snugly. Everything up installed.

I reconnect the battery and plug in my UpRev cable. Then I hit a snag! My Base Map wont load. I get errors. I give my buddy Jwick a text and he walks me through it step by step. Update the turner = check, open Osiris + check, press start button 2x = check, wait as Osiris finds ECU = check, ECU found = check,

Click "load" and load base map into UpRev = fail!! missing files.. GRR!!!!!!

So I will take Jwick'd advice and call UpRev tomorrow and see what happens. I was so hoping I would be able to drive to work in my car.

Anyhoo, it was and still late out so no pic of everything. I will try and do that tomorrow.

YzGyz

__________________
http://www.the370z.com/members-370z-...gyzs-turn.html

YzGyz