SIMOTA1's journal....

zuperman 370 · 05-10-2012, 07:38 AM

daaammm bro best of luck, i know how much it sucks especially when you have waited so long to install something and then an issue like this comes up, well what you could do is leave it half cf and half painted, you fill out the gaps and have that parts painted, and leave the middle part where the vent is in cf, a few members did it and i think it looks great check out the pics from this link

UAM JSE Fender Group Buy.

simota1 · 05-10-2012, 07:49 AM

Quote:

Originally Posted by zuperman 370

daaammm bro best of luck, i know how much it sucks especially when you have waited so long to install something and then an issue like this comes up, well what you could do is leave it half cf and half painted, you fill out the gaps and have that parts painted, and leave the middle part where the vent is in cf, a few members did it and i think it looks great check out the pics from this link

UAM JSE Fender Group Buy.

bro i never even realized the flyest1s car had painted part of the fender.... near the cf part about an inch forward.... THANK you zuperman!!!!

rep going your way... thats what im definitely gonna do..... you think itll look nice on red? im still not 100% sure it will flow...

zuperman 370 · 05-10-2012, 08:06 AM

man it will defiantly look nice on red, to me it looks nicer than having it in full cf, cuz if u have it in full cf then your car will seem copped dont know how to explain it, like fenders in cf then doors in red, here are a few more pics, i think this is your best option for your situation plus looks much nicer than leaving the whole fender in CF

UAM Carbon Fiber Amuse Replica kit

simota1 · 05-10-2012, 08:10 AM

Quote:

Originally Posted by zuperman 370

man it will defiantly look nice on red, to me it looks nicer than having it in full cf, cuz if u have it in full cf then your car will seem copped dont know how to explain it, like fenders in cf then doors in red, here are a few more pics, i think this is your best option for your situation plus looks much nicer than leaving the whole fender in CF

UAM Carbon Fiber Amuse Replica kit

your right man... it will blend in better.... thats another reason why i was like its gonna looks like its chopped off....

zuperman 370 · 05-10-2012, 08:14 AM

then problem solved

, guess it was a blessing in disguise for u

keep us posted bro, love to see how it turns out

simota1 · 05-10-2012, 08:23 AM

Quote:

Originally Posted by zuperman 370

then problem solved

, guess it was a blessing in disguise for u

keep us posted bro, love to see how it turns out

i will bro!!!

KaienZ34 · 05-10-2012, 08:58 AM

I'm painting 98% of my fenders, only leaving a little trim in CF. Subtle like, i'm hoping it looks stock like on the GT-R.

zuperman 370 · 05-10-2012, 09:09 AM

Quote:

Originally Posted by KaienZ34

I'm painting 98% of my fenders, only leaving a little trim in CF. Subtle like, i'm hoping it looks stock like on the GT-R.

that will look great man trust me i was going to do that my self, then oppted to go for the frp since its easier to prep and paint

simota1 · 05-10-2012, 03:33 PM

Quote:

Originally Posted by KaienZ34

I'm painting 98% of my fenders, only leaving a little trim in CF. Subtle like, i'm hoping it looks stock like on the GT-R.

ive thought about this also man....

well see which path i take man....

Isamu · 05-10-2012, 04:10 PM

still excited!

simota1 · 05-11-2012, 02:56 PM

little update.... so... i installed the driver side.... and low and behold it fits perfectly....

no issues at all.... wtf dood?!? lol

i didnt have to f*ck with it at all... it took me about 2 hours to finish it.... i dremeled out all the remaining holes... for all the plastic fasteners

lined everything up and boom took her off the jack stands.... what a HUGE difference to see her on the floor again... ill try to get some pics in a lil bit... im ******* exhausted....

KaienZ34 · 05-11-2012, 02:59 PM

kickazz bro

Isamu · 05-11-2012, 04:46 PM

simota1 · 05-13-2012, 03:57 PM

some pics from that small meet we had... fenders are gonna be painted this week.... should start the body work tonight and finish by thursday before the nissan meet....

Isamu · 05-13-2012, 06:36 PM

looks boss man! can't wait till V3.0 is finished!

05-10-2012, 08:58 AM	#7 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	I'm painting 98% of my fenders, only leaving a little trim in CF. Subtle like, i'm hoping it looks stock like on the GT-R. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

05-11-2012, 02:56 PM	#11 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 406	little update.... so... i installed the driver side.... and low and behold it fits perfectly.... no issues at all.... wtf dood?!? lol i didnt have to fck with it at all... it took me about 2 hours to finish it.... i dremeled out all the remaining holes... for all the plastic fasteners lined everything up and boom took her off the jack stands.... what a HUGE difference to see her on the floor again... ill try to get some pics in a lil bit... im **** exhausted.... __________________ TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/**

05-11-2012, 02:59 PM	#12 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	kickazz bro __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

05-13-2012, 03:57 PM	#14 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 406	some pics from that small meet we had... fenders are gonna be painted this week.... should start the body work tonight and finish by thursday before the nissan meet.... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mike's Journal	Mike	Member's 370Z Gallery	638	08-11-2023 10:06 AM
KillerBee370's journal	KillerBee370	Engine & Drivetrain	100	08-18-2010 01:58 PM
SIMOTA1 got rear ended.... f*ck	simota1	Exterior & Interior	76	10-18-2009 09:13 PM
Simota1 FIRST PHOTOSHOOT!!!! check out some of the pics taken by my friend	simota1	Exterior & Interior	18	07-27-2009 06:55 PM
Imag Z journal	imag	Member's 370Z Gallery	4	05-06-2009 02:05 PM

05-10-2012, 07:38 AM	#1 (permalink)
zuperman 370 Track Member Join Date: Dec 2009 Location: BAHRAIN Posts: 944 Drives: 370z 2010 at blue Rep Power: 17	daaammm bro best of luck, i know how much it sucks especially when you have waited so long to install something and then an issue like this comes up, well what you could do is leave it half cf and half painted, you fill out the gaps and have that parts painted, and leave the middle part where the vent is in cf, a few members did it and i think it looks great check out the pics from this link UAM JSE Fender Group Buy.

05-10-2012, 08:06 AM	#3 (permalink)
zuperman 370 Track Member Join Date: Dec 2009 Location: BAHRAIN Posts: 944 Drives: 370z 2010 at blue Rep Power: 17	man it will defiantly look nice on red, to me it looks nicer than having it in full cf, cuz if u have it in full cf then your car will seem copped dont know how to explain it, like fenders in cf then doors in red, here are a few more pics, i think this is your best option for your situation plus looks much nicer than leaving the whole fender in CF UAM Carbon Fiber Amuse Replica kit

05-10-2012, 08:14 AM	#5 (permalink)
zuperman 370 Track Member Join Date: Dec 2009 Location: BAHRAIN Posts: 944 Drives: 370z 2010 at blue Rep Power: 17	then problem solved , guess it was a blessing in disguise for u keep us posted bro, love to see how it turns out