SIMOTA1's journal....

simota1 · 04-27-2012, 08:13 AM

helper spring from lmbmikez came in!!!

i THINK my kevlar console is in guam... ill figure that part out tomoro

simota1 · 04-27-2012, 07:13 PM

update my red kevlar console is finally here.... the stupid mail man literally left it in FRONT of my house yesterday

its a damn good thing i walked my dog this morning because i would have not known it was there all along since yesterday....

only thing left im still waiting for is my TS cover but im in no hurry.... even if rhd says 4-6 weeks im expecting 2-3 months wait... its ok though itll be worth the wait....

update on my next mod.... ive been saving up now and i finally had enough money to order something again so

i was gonna order the password jdm bat covers V2 from ebay... and then one of the FML moments happened.... so this morning i noticed the bed was wet because of the aircon leaking.... i was like hmmm... i just bought this thing like 2-3 months ago... wtf is it doing that? so i go to the back of it and look wats up... and i see all the water from the condensation is just pooling up all inside of the aircon... STUPID GE didnt put a hole so the water could escape... i installed the aircon tilting backwards a bit already but i guess the angle wasnt enough... and i dont feel like jackhammering the top of the wall so i could tilt it more ,so the only solution is to drill a hole.... i figure hey, ill just drill a small 1/8 hole should be enough to let the water leak out.... so i grab my cordless drill slap on a 1/8 drill bit and drill in the most corner part so i wouldnt hit any vital part of the aircon... and BOOM.... i guess the condenser core was all the way up on that corner also and even if i was drilling as careful and as slowly as i could, i still poked a hole on the condenser also

..... all the freon spewed out!!!! lucky thing it didnt go on me...so now the money i saved will go to another AC.... sh!t wat a waste.....

the funny part of this was it happened 5 mins after i found my package in the front of my house... i was all smiles and then decided to do the drilling and what a great way to start my day...

KaienZ34 · 04-27-2012, 08:10 PM

Quote:

Originally Posted by simota1

update my red kevlar console is finally here.... the stupid mail man literally left it in FRONT of my house yesterday

its a damn good thing i walked my dog this morning because i would have not known it was there all along since yesterday....

only thing left im still waiting for is my TS cover but im in no hurry.... even if rhd says 4-6 weeks im expecting 2-3 months wait... its ok though itll be worth the wait....

update on my next mod.... ive been saving up now and i finally had enough money to order something again so

i was gonna order the password jdm bat covers V2 from ebay... and then one of the FML moments happened.... so this morning i noticed the bed was wet because of the aircon leaking.... i was like hmmm... i just bought this thing like 2-3 months ago... wtf is it doing that? so i go to the back of it and look wats up... and i see all the water from the condensation is just pooling up all inside of the aircon... STUPID GE didnt put a hole so the water could escape... i installed the aircon tilting backwards a bit already but i guess the angle wasnt enough... and i dont feel like jackhammering the top of the wall so i could tilt it more ,so the only solution is to drill a hole.... i figure hey, ill just drill a small 1/8 hole should be enough to let the water leak out.... so i grab my cordless drill slap on a 1/8 drill bit and drill in the most corner part so i wouldnt hit any vital part of the aircon... and BOOM.... i guess the condenser core was all the way up on that corner also and even if i was drilling as careful and as slowly as i could, i still poked a hole on the condenser also

..... all the freon spewed out!!!! lucky thing it didnt go on me...so now the money i saved will go to another AC.... sh!t wat a waste.....

the funny part of this was it happened 5 mins after i found my package in the front of my house... i was all smiles and then decided to do the drilling and what a great way to start my day...

I had the same with my bedroom window AC, i pulled the cover off and then drilled my weep holes. I feel for ya my brotha....

simota1 · 04-27-2012, 08:13 PM

Quote:

Originally Posted by KaienZ34

I had the same with my bedroom window AC, i pulled the cover off and then drilled my weep holes. I feel for ya my brotha....

i think thats what i shoulda done..... i was tryna save some work for me... lol but still ****** it up lol

Isamu · 04-27-2012, 08:32 PM

lets get your fenders done ^_^

simota1 · 04-27-2012, 08:45 PM

^^^ i might end up painting it myself.... with how slow my side lines are....

Isamu · 04-27-2012, 08:51 PM

Quote:

Originally Posted by simota1

^^^ i might end up painting it myself.... with how slow my side lines are....

lol.. just get em wrapped in red cf/kevlar LOL
cuz that **** looks hot!

simota1 · 04-29-2012, 02:45 AM

update on my parts.... installed my helper spring i got.... from lmkmike on here

and also installed the kevlar consoles.... ill be making a thread to do a review on the parts

on a side note... those helper spring gave me a nightmare... i kinked the bushing that holds the pin in place when i pryed it upward to take out the pin... spent one hour and a half filling the kink outa the way so i could put the pin back in

it didnt help that ima pretty chubby guy so all my fats where smashed up against me when i was working in the tight working area.....

Isamu · 04-29-2012, 02:53 AM

Quote:

Originally Posted by simota1

update on my parts.... installed my helper spring i got.... from lmkmike on here

and also installed the kevlar consoles.... ill be making a thread to do a review on the parts

on a side note... those helper spring gave me a nightmare... i kinked the bushing that holds the pin in place when i pryed it upward to take out the pin... spent one hour and a half filling the kink outa the way so i could put the pin back in

it didnt help that ima pretty chubby guy so all my fats where smashed up against me when i was working in the tight working area.....

good stuff man.. now

or

simota1 · 04-29-2012, 07:15 AM

first off... my stupidity.... now i only took a after shot of the spring and not the part of the bushing which i kinked because at the time it occured it was no laughing manner lol... i was pissed beyond belief. the second photo is a pic of the dremel burr i used to grind away as much of the metal i kinked inward....now picture number 3 when the dremel failed because i could no longer maneuver it inward to get more of the blockage out.. i resulted in cave man technique.. i broke a file just so i could file the bushing in and out with the piece i broke off...i spent an hour doing this... i wanted to break that bushing off lol

KaienZ34 · 04-29-2012, 08:10 AM

Holy shit that looks amazing....

Isamu · 04-29-2012, 08:12 AM

wow man! that's nuts!

simota1 · 04-29-2012, 03:28 PM

Quote:

Originally Posted by KaienZ34

Holy shit that looks amazing....

thanks man... whats amazing is how i fit myself to install my helper spring

Quote:

Originally Posted by Isamu

wow man! that's nuts!

Isamu · 04-29-2012, 11:24 PM

see, now you HAVE to do the red kevlar fenders :P

simota1 · 04-30-2012, 01:45 AM

Quote:

Originally Posted by Isamu

see, now you HAVE to do the red kevlar fenders :P

04-27-2012, 08:13 AM	#1 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 407	helper spring from lmbmikez came in!!! i THINK my kevlar console is in guam... ill figure that part out tomoro __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

04-27-2012, 07:13 PM	#2 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 407	update my red kevlar console is finally here.... the stupid mail man literally left it in FRONT of my house yesterday its a damn good thing i walked my dog this morning because i would have not known it was there all along since yesterday.... only thing left im still waiting for is my TS cover but im in no hurry.... even if rhd says 4-6 weeks im expecting 2-3 months wait... its ok though itll be worth the wait.... update on my next mod.... ive been saving up now and i finally had enough money to order something again so i was gonna order the password jdm bat covers V2 from ebay... and then one of the FML moments happened.... so this morning i noticed the bed was wet because of the aircon leaking.... i was like hmmm... i just bought this thing like 2-3 months ago... wtf is it doing that? so i go to the back of it and look wats up... and i see all the water from the condensation is just pooling up all inside of the aircon... STUPID GE didnt put a hole so the water could escape... i installed the aircon tilting backwards a bit already but i guess the angle wasnt enough... and i dont feel like jackhammering the top of the wall so i could tilt it more ,so the only solution is to drill a hole.... i figure hey, ill just drill a small 1/8 hole should be enough to let the water leak out.... so i grab my cordless drill slap on a 1/8 drill bit and drill in the most corner part so i wouldnt hit any vital part of the aircon... and BOOM.... i guess the condenser core was all the way up on that corner also and even if i was drilling as careful and as slowly as i could, i still poked a hole on the condenser also ..... all the freon spewed out!!!! lucky thing it didnt go on me...so now the money i saved will go to another AC.... sh!t wat a waste..... the funny part of this was it happened 5 mins after i found my package in the front of my house... i was all smiles and then decided to do the drilling and what a great way to start my day... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

04-27-2012, 08:45 PM	#6 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 407	^^^ i might end up painting it myself.... with how slow my side lines are.... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

04-29-2012, 02:45 AM	#8 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 407	update on my parts.... installed my helper spring i got.... from lmkmike on here and also installed the kevlar consoles.... ill be making a thread to do a review on the parts on a side note... those helper spring gave me a nightmare... i kinked the bushing that holds the pin in place when i pryed it upward to take out the pin... spent one hour and a half filling the kink outa the way so i could put the pin back in it didnt help that ima pretty chubby guy so all my fats where smashed up against me when i was working in the tight working area..... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

04-29-2012, 07:15 AM	#10 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 407	first off... my stupidity.... now i only took a after shot of the spring and not the part of the bushing which i kinked because at the time it occured it was no laughing manner lol... i was pissed beyond belief. the second photo is a pic of the dremel burr i used to grind away as much of the metal i kinked inward....now picture number 3 when the dremel failed because i could no longer maneuver it inward to get more of the blockage out.. i resulted in cave man technique.. i broke a file just so i could file the bushing in and out with the piece i broke off...i spent an hour doing this... i wanted to break that bushing off lol __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

04-29-2012, 08:10 AM	#11 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 179	Holy shit that looks amazing.... __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mike's Journal	Mike	Member's 370Z Gallery	638	08-11-2023 10:06 AM
KillerBee370's journal	KillerBee370	Engine & Drivetrain	100	08-18-2010 01:58 PM
SIMOTA1 got rear ended.... f*ck	simota1	Exterior & Interior	76	10-18-2009 09:13 PM
Simota1 FIRST PHOTOSHOOT!!!! check out some of the pics taken by my friend	simota1	Exterior & Interior	18	07-27-2009 06:55 PM
Imag Z journal	imag	Member's 370Z Gallery	4	05-06-2009 02:05 PM