SIMOTA1's journal....

simota1 · 07-06-2013, 08:22 AM

thanks everyone!!! and wiggins imma pm you about the brackets...

i just spent 5 hours painstakingly installing the damn oil catch cans... my back hurts from bending over to work on the bay anyways ill post pics tomorrow... i am absolutely happy with the fact im almost complete with my TS engine bay

LMBmikeZ · 07-06-2013, 08:25 AM

Quote:

Originally Posted by Wiggins3377

Intake brackets?! And i just noticed your couplers are grey. Did you go with samco on those as well?

Sent from my iPhone using Tapatalk

yep he went samco he posted them a week or two ago when he got them and installed them if you look a little bit back farther you will see the posts

Jon hood looks great! I hope when you paint it you keep a little CF showing in some spot cause the CF work varis does looks phenomenal and I wouldn't want to cover it all up IMO

Congratz on finally getting your TS oil cans and rad cap, good to see they hooked you up for the delay to! They should realize that you have bought basically everything from them!

simota1 · 07-06-2013, 08:33 AM

Quote:

Originally Posted by LMBmikeZ

yep he went samco he posted them a week or two ago when he got them and installed them if you look a little bit back farther you will see the posts

Jon hood looks great! I hope when you paint it you keep a little CF showing in some spot cause the CF work varis does looks phenomenal and I wouldn't want to cover it all up IMO

Congratz on finally getting your TS oil cans and rad cap, good to see they hooked you up for the delay to! They should realize that you have bought basically everything from them!

now that you mention it... im actually starting to fall in love with it purely raw cf..... i really wanna paint it but at the same time i dont wanna cover the nice weave of cf of the hood....

well see... i actually have an idea how to make the hood flow with the body...

biggest reason why i wanna paint it.. cf hoods look kinda cut off on our cars but once i do the "curve" i think itll flow nicely even if its pure CF

thanks man....

LMBmikeZ · 07-06-2013, 08:34 AM

NP

Hood is gorgeous I am sure what you do will be sexy as h3ll

Z is looking hot!

Wiggins3377 · 07-06-2013, 09:43 AM

Quote:

Originally Posted by simota1

now that you mention it... im actually starting to fall in love with it purely raw cf..... i really wanna paint it but at the same time i dont wanna cover the nice weave of cf of the hood....

well see... i actually have an idea how to make the hood flow with the body...

biggest reason why i wanna paint it.. cf hoods look kinda cut off on our cars but once i do the "curve" i think itll flow nicely even if its pure CF

thanks man....

Keep it raw, I like the look.

Mr&Mrs · 07-06-2013, 03:17 PM

Nice Cans dude, do you work out?

So glad you finally go them!

Z_bro · 07-06-2013, 10:03 PM

Quote:

Originally Posted by simota1

i scuff up the whole tail light... taped the inner red part and left an outline which i would paint black... i then smoked the reverse strips and shot clear over the whole taillight.....

I am so stealing this for my new JDM's!!! I will be calling the body shop on Moday...

simota1 · 07-07-2013, 05:29 AM

installed

LMBmikeZ · 07-07-2013, 08:01 AM

damn looks good Jon!

Now you need to wrap your strut brace in CF to finish it off

KaienZ34 · 07-07-2013, 08:40 AM

user647_pic23623_1287952881.gif

GaleForce · 07-07-2013, 09:07 AM

Quote:

Originally Posted by simota1

now that you mention it... im actually starting to fall in love with it purely raw cf..... i really wanna paint it but at the same time i dont wanna cover the nice weave of cf of the hood....

well see... i actually have an idea how to make the hood flow with the body...

biggest reason why i wanna paint it.. cf hoods look kinda cut off on our cars but once i do the "curve" i think itll flow nicely even if its pure CF

thanks man....

I would make the windshield pillars CF if you leave the hood as is.

GaleForce · 07-07-2013, 09:08 AM

Quote:

Originally Posted by simota1

installed

So nice! Clean install!

Z_bro · 07-07-2013, 09:32 AM

I love the hood and I was thinking of buying the carbon signal inserts. I am in Miami and when it rains here (like everyday in the summer) it pours an ocean on you... I never seen rain like this till I moved here! My questions with the open vents will that hit my cold air intake and stall me out????

Quote:

Originally Posted by simota1

so here it is... after almost 2 months of waiting for this damn thing to ship

i give a total

to VARIS.... my hood had zero fitment issues... it installed in about 5 mins.. it took me longer to unclip the lines for the water squirters then to install the hood and align it

simota1 · 07-07-2013, 03:44 PM

Quote:

Originally Posted by Z_bro

I love the hood and I was thinking of buying the carbon signal inserts. I am in Miami and when it rains here (like everyday in the summer) it pours an ocean on you... I never seen rain like this till I moved here! My questions with the open vents will that hit my cold air intake and stall me out????

one of the biggest reasons why i bought a JDM hood is that they come with a rain gutter channel built in... i am not sure if you know where guam is.. but rain is a HUGE part of island life.... it rains here the whole year

when the rainy season hits i would say it rains like an ocean also

the varis hood comes with block offs so when it rains your motor stays dry when there is enough water to fill the block offs it will then pass through the rain gutter chamber and come out of two small holes near the head lights thus leaving the whole dirty soaked motor outa the picture

simota1 · 07-07-2013, 03:49 PM

Quote:

Originally Posted by GaleForce

I would make the windshield pillars CF if you leave the hood as is.

this i would do

i wanted to do this since i had my car shot at the paint shop the only problem i had was shipping the pillars was close to $300 bucks to ship them to carbon element

and when i looked into seibon pillars... i have heard they fit like sh!t i then asked carbon signal to make me pillar overlay caps but they never got back to me

07-06-2013, 08:22 AM	#2626 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 407	thanks everyone!!! and wiggins imma pm you about the brackets... i just spent 5 hours painstakingly installing the damn oil catch cans... my back hurts from bending over to work on the bay anyways ill post pics tomorrow... i am absolutely happy with the fact im almost complete with my TS engine bay LMBmikeZ and GaleForce like this. __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

07-06-2013, 08:34 AM	#2629 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10351	NP Hood is gorgeous I am sure what you do will be sexy as h3ll Z is looking hot! __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

07-06-2013, 03:17 PM	#2631 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31942	Nice Cans dude, do you work out? So glad you finally go them! GaleForce likes this. __________________ Project Z <--Click - Check out the link too many mods to list!

07-07-2013, 05:29 AM	#2633 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 407	installed CarbonSignal likes this. __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

07-07-2013, 08:01 AM	#2634 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10351	damn looks good Jon! Now you need to wrap your strut brace in CF to finish it off simota1 likes this. __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

07-07-2013, 08:40 AM	#2635 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 179	user647_pic23623_1287952881.gif simota1 likes this. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mike's Journal	Mike	Member's 370Z Gallery	638	08-11-2023 10:06 AM
KillerBee370's journal	KillerBee370	Engine & Drivetrain	100	08-18-2010 01:58 PM
SIMOTA1 got rear ended.... f*ck	simota1	Exterior & Interior	76	10-18-2009 09:13 PM
Simota1 FIRST PHOTOSHOOT!!!! check out some of the pics taken by my friend	simota1	Exterior & Interior	18	07-27-2009 06:55 PM
Imag Z journal	imag	Member's 370Z Gallery	4	05-06-2009 02:05 PM