The Life and Times of Riptide67's 370Z

wolfesquire · 07-09-2014, 11:33 PM

^ get in line

Riptide67 · 07-10-2014, 01:59 PM

There is a long line on that particular red head!

Riptide67 · 07-10-2014, 09:33 PM

Took some time today to install some 15mm Ichiba V2 spacers. Setting the rear fitment at 19x11+0 on a slightly stretched 275. The fitment is delicious.

I also blew my OEM sport spoiler into about 10 different pieces during the removal. Holy ****...Nissan did not want that thing to come off for any reason.

Riptide67 · 07-13-2014, 08:07 PM

Finally got the duckbill installed Friday evening. Fitment is on point! It took hours to clean off the 3m adhesive Nissan installs the oem spoiler with. I was slightly sketched out drilling into the rear hatch though. Took me some major warming up to do.

I'd rate the difficulty level at about a 5/10.

Tools used:
Heat gun
goo gone
Stepped drill bit/hole widener
11mm deep socket
10mm deep socket
Socket wrench
Long extension

I did not use any 3m on the new duckbill. I will be removing it again to put some 3m tape down.

Riptide67 · 07-21-2014, 12:55 PM

It's been an extremely busy month with car shows and events. July is pretty much packed each weekend.

Had the pleasure of doing StanceWars, Froever Powdercoating's Cruise in, and Fatlace Offset Kings.

This weekend is no different with HIN Seattle and a car show dedicated to the Kids of the Seattle Children's Hospital.

With that being said, I've got my work cut out for me to get the car ready. I've got some goods in route and some others that have been sitting around and I have yet to have time to install.

-ProSplitters for Amuse side skirts
-GT-R Map lenses
-reposition from E Level Sensors
-Underglow kit (not excited or wanted lol)

Things on the way
-Zspec 260+ piece dress up kit in red
-Z1 Motorsports hood struts

Then I have to figure out a way to make the Z cleaner than it's ever been.

I've also been doing some seat shopping. After toying around with the idea of an aftermarket steering wheel and quick disconnect hub, I changed my mind. I don't want to have to relocate the cruise control switch for future use. I am currently shopping Bride and Status seats. The decision is tough. I want something that really stands out, but also love the subtle and simple look of black.

zilverbullet · 07-21-2014, 01:02 PM

I was debating an aftermarket steering wheel as well. I asked on vq|nation what people's thoughts were on the benefits since it seems like you will lose cruise control functionality and toggling through maps if you wire it that way.

This seemed like an option to go with the aftermarket steering wheel:

https://www.facebook.com/photo.php?f...1279117&type=1

Riptide67 · 07-28-2014, 12:31 AM

Had an amazing weekend!

Kicked it off with Hot Import Nights Seattle. Took home Hottest Nissan 2nd place (beaten by a $300k Liberty Walk GTR).

Followed by a children's charity car show for the Seattle Children's Hospital. I was awarded Best Exterior!

Pictures to follow

Riptide67 · 07-30-2014, 12:57 PM

Riptide67 · 08-04-2014, 11:14 PM

With show season winding down, I ordered the seibon CF A pillars to hopefully finish the car off for a bit. I also got a stillen roof spoiler from a friend. I like the look of it, but am debating what to do with it. Since I am slowly going all CF, it seems silly to waste the money having it painted magnetic black. I may temporarily have it wrapped in vinyl to keep the cost down.

axmea? · 08-05-2014, 01:47 AM

Nice build. I like what you did.

As for the red head, she needs better shoes.

Riptide67 · 08-05-2014, 09:02 AM

Thanks, man! That's the last thing I'm looking at....that woman's features and curves are to die for.

Riptide67 · 08-07-2014, 10:21 PM

Scooped up an FI non resonated exhaust system today. I've been wanting to swap out my resonators and cans. The deal was sweet enough at 1k. Then I'll flip my 12" resonated system and call it done!

KaienZ34 · 08-09-2014, 05:55 PM

Great stuff RIP...

axmea? · 08-10-2014, 07:35 AM

Quote:

Originally Posted by Riptide67

Thanks, man! That's the last thing I'm looking at....that woman's features and curves are to die for.

Everything's in the details just like a car show. Lol.

NuGen Auto · 08-10-2014, 01:51 PM

Beautiful Car!!! Thats Team NuGen baby! By the way Riptide we got our printer making some decals this week were gonna see how they come out and then well send some your way with a tshirt and what not.

07-09-2014, 11:33 PM	#271 (permalink)
wolfesquire Base Member Join Date: Mar 2014 Location: 757 Posts: 204 Drives: 10 370Z Touring Rep Power: 11	^ get in line Riptide67 likes this.

07-10-2014, 01:59 PM	#272 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 36 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 68	There is a long line on that particular red head! __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

07-10-2014, 09:33 PM	#273 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 36 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 68	Took some time today to install some 15mm Ichiba V2 spacers. Setting the rear fitment at 19x11+0 on a slightly stretched 275. The fitment is delicious. I also blew my OEM sport spoiler into about 10 different pieces during the removal. Holy ****...Nissan did not want that thing to come off for any reason. CarbonFZ likes this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

07-13-2014, 08:07 PM	#274 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 36 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 68	Finally got the duckbill installed Friday evening. Fitment is on point! It took hours to clean off the 3m adhesive Nissan installs the oem spoiler with. I was slightly sketched out drilling into the rear hatch though. Took me some major warming up to do. I'd rate the difficulty level at about a 5/10. Tools used: Heat gun goo gone Stepped drill bit/hole widener 11mm deep socket 10mm deep socket Socket wrench Long extension I did not use any 3m on the new duckbill. I will be removing it again to put some 3m tape down. Mr&Mrs and LMBmikeZ like this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

07-21-2014, 12:55 PM	#275 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 36 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 68	It's been an extremely busy month with car shows and events. July is pretty much packed each weekend. Had the pleasure of doing StanceWars, Froever Powdercoating's Cruise in, and Fatlace Offset Kings. This weekend is no different with HIN Seattle and a car show dedicated to the Kids of the Seattle Children's Hospital. With that being said, I've got my work cut out for me to get the car ready. I've got some goods in route and some others that have been sitting around and I have yet to have time to install. -ProSplitters for Amuse side skirts -GT-R Map lenses -reposition from E Level Sensors -Underglow kit (not excited or wanted lol) Things on the way -Zspec 260+ piece dress up kit in red -Z1 Motorsports hood struts Then I have to figure out a way to make the Z cleaner than it's ever been. I've also been doing some seat shopping. After toying around with the idea of an aftermarket steering wheel and quick disconnect hub, I changed my mind. I don't want to have to relocate the cruise control switch for future use. I am currently shopping Bride and Status seats. The decision is tough. I want something that really stands out, but also love the subtle and simple look of black. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

07-21-2014, 01:02 PM	#276 (permalink)
zilverbullet Track Member Join Date: Mar 2013 Location: Bay Area, CA Posts: 668 Drives: a silver bullet Rep Power: 15	I was debating an aftermarket steering wheel as well. I asked on vq\|nation what people's thoughts were on the benefits since it seems like you will lose cruise control functionality and toggling through maps if you wire it that way. This seemed like an option to go with the aftermarket steering wheel: https://www.facebook.com/photo.php?f...1279117&type=1 Riptide67 likes this. __________________ '13 & Infinity Swifts Z1 Post-MAF F.I. NST *VARIS* Tommy Kaira AeroJacket MotorDyne

07-28-2014, 12:31 AM	#277 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 36 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 68	Had an amazing weekend! Kicked it off with Hot Import Nights Seattle. Took home Hottest Nissan 2nd place (beaten by a $300k Liberty Walk GTR). Followed by a children's charity car show for the Seattle Children's Hospital. I was awarded Best Exterior! Pictures to follow LMBmikeZ likes this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

07-30-2014, 12:57 PM	#278 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 36 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 68	LMBmikeZ likes this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

08-04-2014, 11:14 PM	#279 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 36 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 68	With show season winding down, I ordered the seibon CF A pillars to hopefully finish the car off for a bit. I also got a stillen roof spoiler from a friend. I like the look of it, but am debating what to do with it. Since I am slowly going all CF, it seems silly to waste the money having it painted magnetic black. I may temporarily have it wrapped in vinyl to keep the cost down. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

08-05-2014, 01:47 AM	#280 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,233 Drives: WELL ZED PW 6MT Rep Power: 53240	Nice build. I like what you did. As for the red head, she needs better shoes. Riptide67 likes this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

08-05-2014, 09:02 AM	#281 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 36 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 68	Thanks, man! That's the last thing I'm looking at....that woman's features and curves are to die for. KaienZ34 likes this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

08-07-2014, 10:21 PM	#282 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 36 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 68	Scooped up an FI non resonated exhaust system today. I've been wanting to swap out my resonators and cans. The deal was sweet enough at 1k. Then I'll flip my 12" resonated system and call it done! LMBmikeZ and zefaulter like this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

08-09-2014, 05:55 PM	#283 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	Great stuff RIP... Riptide67 likes this. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

08-10-2014, 01:51 PM	#285 (permalink)
NuGen Auto A True Z Fanatic Join Date: Apr 2014 Location: Orlando Posts: 6,195 Drives: 2016 Corvette C7 Rep Power: 23	Beautiful Car!!! Thats Team NuGen baby! By the way Riptide we got our printer making some decals this week were gonna see how they come out and then well send some your way with a tshirt and what not. Riptide67 and Meulen like this. __________________ NuGen Automotive, LLC: www.NuGenAutomotive.com - HIN Video: 407-697-5671 : Sales@NuGenAutomotive.com Last edited by NuGen Auto; 08-11-2014 at 07:07 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The life and times of a silver Z	3.7 ZPA	Member's 370Z Gallery	12	10-05-2017 07:47 PM
The Life and Times of My 300ZX Turbo	/Angelo350Z/	Other Vehicles	26	08-18-2014 09:47 AM
serious 370z safety, rolled multiple times....	JrumMusic	Nissan 370Z General Discussions	47	07-27-2011 10:19 AM
370Z lap times faster than M3/Cayman. Behind Porsche 9s.	zmyride	Nissan 370Z General Discussions	22	02-11-2011 01:09 PM
LA Times: Hook'n up with the 370Z	cstr_Cali	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	12-02-2008 11:56 AM