ColdFire Journal

ColdFire

Went over today and the car was on the polishing area for some booty wet sanding.



the car still dirty as hell with one month worth of sand. Anyway here is the pictures,







Bad news with installation of the EVO -R FOG LIGHT and i need your guys input to help solve the issue, apparently the electrician has no talent what so ever.

I will explain the issue unfortunately because of disappointment i was not able to record a video to document the issue.


They install the EVO-R Fog light as the diagram suggested,essentially there are three wires one goes for the ground, 2nd for the brake, third for the parking. Straight forward process however, the only difference between US Spec and Euro Spec is the fog light. In Us you connect the parking to the brake light as well so when its turned on the solid light will come as well I would like to do thing differently, Mine came with the fog light switch why not utilize it, so what they did was just cutting the two wires in the picture below for the factory fog light.



They cut both factory fog light wires and grounded the upper wire and connected the other one to the EVO-R as parking, however, when i turn the fog light ON from the switch it turns ON for 3 seconds then turn OFF for good
another issue, the flashing fog light will always flash when i hit the brake flash even though the switch for fog light on board is OFF or ON

I would like the solid light to turn ON and OFF from the onboard factory fog light switch, and that will activate the flashing with the brake light so if the solid fog light switch is OFF the flashing with the brake light is OFF as well!

Please help a brother out. my car will leave the shop on Tuesday so they either mess things up and play around or i tell them what to do. otherwise i will cut all wiring and call it a day