John's Sweet NA build

Navyboy916 · 07-18-2013, 05:58 PM

Here is a list of cost. Be advised that I might have missed a couple of items:
1. Labor for disassembly and reassembly paid to Nissan 2900.00
2. Gtm valve train 1500.00
3. Gtm stage 1 heads 2000.00
4. Gtm torque converter 625.00
5. Gtm HD flex plate 435.00
6. JUN exhaust cams 650.00
7. Cosworth head gaskets 315.00
8. ARP L19 headstuds 529.00
9 Z1 engine and transmission mounts 400.00
10. Stillen transmission cooler 329.00
11. NST pulley set 250.00

All these parts were added at the same time during the reinstall. I had all the bolt on before the motor build so the bolt on parts are not listed.
The total time was about 6 months due to shipping and GTM backlog of work at the time and reassembly of the engine back in the car. I am missing all the shipping cost for the heads and the torque converter cause from Guam it was ridiculous. This is a basic idea of the cost I had for this build. A lot of small cost r not included either. The dealership also replace both VVEL actuators under warranty just to match them with the new heads. That was a hookup. If I think of anything else I will will update this post. So far I haven't had any problems at all. The engine is so much louder then before and u can hear the cams due to the larger duration of the cams. Next upgrade is going to be the transmission valve body in increase the line pressure safely throughout the transmission.

LukasC · 07-22-2013, 03:37 AM

That's a pretty extensive build and cost is up there with Twins. But props for going a different probably more reliable route!

Navyboy916 · 07-22-2013, 03:47 AM

Thanks, I just didnt want to go the F.I route like so many people here do. I mean don't get me wrong they have a lot of power and its so sick but I just wanted to here that motor scream and trust me it does

DEpointfive0 · 07-22-2013, 07:13 AM

Quote:

Originally Posted by LukasC

That's a pretty extensive build and cost is up there with Twins. But props for going a different probably more reliable route!

Quote:

Originally Posted by Navyboy916

Thanks, I just didnt want to go the F.I route like so many people here do. I mean don't get me wrong they have a lot of power and its so sick but I just wanted to here that motor scream and trust me it does

AND, if he DID want a TT setup he'd still have to do a LOT of those mods as well, if not all of them

carlitos_370z · 07-22-2013, 07:35 AM

awesome build!!!

wstar · 07-22-2013, 08:28 AM

Quote:

Originally Posted by Navyboy916

Here is a list of cost. Be advised that I might have missed a couple of items:
.....
All these parts were added at the same time during the reinstall. I had all the bolt on before the motor build so the bolt on parts are not listed.

Don't know if I missed it elsewhere, but as long as you're doing all these nice upgrades, you might want to switch to the Nismo oil pump to avoid risk of grenading the oil pump gear at high revs down the road. It's a relatively cheap investment in engine durability if you're already digging in that deep.

Navyboy916 · 07-24-2013, 06:55 AM

I might look into the nismo oil pump. I just checked and my stiff exhaust mounts from torque solutions has arrived and will be delivered tomorrow.

DEpointfive0 · 07-24-2013, 07:12 AM

Quote:

Originally Posted by Navyboy916

For the headers I still want to retain some sort of cats and so the next best thing for me is going to be the 5zigen headers.

I pray you didn't buy them. Not the greatest design and no verified power gains. Try the Z1 headers... (As much as I think they f'd the customer by requiring DE cats)

ts-c63 · 07-24-2013, 07:32 AM

post a couple videos if you can

Navyboy916 · 07-24-2013, 03:31 PM

I will post a video. I also have just ordered the zspeed underside diffuser. Today I will be buying the csf radiator as well. I live in a very hot climate so cooling is what's my focus now. I am going to go to Nissan today to see about swapping the oil pump for the nismo oil pump to help ensure oil flow at high rpm's.

Chuck33079 · 07-24-2013, 03:37 PM

Good call on both the Zspeed under panel and CSF radiator. I've been very pleased with them.

Navyboy916 · 07-24-2013, 03:41 PM

Thanks for the info it just reaffirms the decision.

diddy535 · 07-24-2013, 04:00 PM

Do the 5zigen! I wanted to get them, I've got the 5zigen exhaust and I looove it!

LukasC · 07-24-2013, 10:51 PM

Quote:

Originally Posted by diddy535

Do the 5zigen! I wanted to get them, I've got the 5zigen exhaust and I looove it!

Agree would love to see how those are!

Luciano13 · 08-08-2013, 05:03 PM

Wicked build

im thinking of building the internals as well before/if I go F.I.
What kind of Horses and Torque we talking here with your N/A??

View Poll Results: Do u like the engine mods or exterior mods?
Engine	29	78.38%
Exterior	9	24.32%
Multiple Choice Poll. Voters: 37. You may not vote on this poll

07-18-2013, 05:58 PM	#271 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 13	Here is a list of cost. Be advised that I might have missed a couple of items: 1. Labor for disassembly and reassembly paid to Nissan 2900.00 2. Gtm valve train 1500.00 3. Gtm stage 1 heads 2000.00 4. Gtm torque converter 625.00 5. Gtm HD flex plate 435.00 6. JUN exhaust cams 650.00 7. Cosworth head gaskets 315.00 8. ARP L19 headstuds 529.00 9 Z1 engine and transmission mounts 400.00 10. Stillen transmission cooler 329.00 11. NST pulley set 250.00 All these parts were added at the same time during the reinstall. I had all the bolt on before the motor build so the bolt on parts are not listed. The total time was about 6 months due to shipping and GTM backlog of work at the time and reassembly of the engine back in the car. I am missing all the shipping cost for the heads and the torque converter cause from Guam it was ridiculous. This is a basic idea of the cost I had for this build. A lot of small cost r not included either. The dealership also replace both VVEL actuators under warranty just to match them with the new heads. That was a hookup. If I think of anything else I will will update this post. So far I haven't had any problems at all. The engine is so much louder then before and u can hear the cams due to the larger duration of the cams. Next upgrade is going to be the transmission valve body in increase the line pressure safely throughout the transmission. Last edited by Navyboy916; 07-18-2013 at 06:13 PM.

07-24-2013, 06:55 AM	#277 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 13	I might look into the nismo oil pump. I just checked and my stiff exhaust mounts from torque solutions has arrived and will be delivered tomorrow. Mr&Mrs likes this. Last edited by Navyboy916; 07-24-2013 at 07:01 AM.

07-24-2013, 03:37 PM	#281 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	Good call on both the Zspeed under panel and CSF radiator. I've been very pleased with them. Navyboy916 and DEpointfive0 like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

07-24-2013, 04:00 PM	#283 (permalink)
diddy535 Track Member Join Date: Feb 2012 Location: St. Louis, MO Posts: 789 Drives: '09 370Z RAE 6MT Rep Power: 14	Do the 5zigen! I wanted to get them, I've got the 5zigen exhaust and I looove it! __________________ ( Click to show/hide ) http://www.the370z.com/members-370z-...ys-thread.html

07-22-2013, 03:37 AM	#272 (permalink)
LukasC Track Member Join Date: Apr 2011 Location: San Antonio, Tx Posts: 664 Drives: 11 Stillen SC Bl M6 Rep Power: 17	That's a pretty extensive build and cost is up there with Twins. But props for going a different probably more reliable route!

07-22-2013, 03:47 AM	#273 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 13	Thanks, I just didnt want to go the F.I route like so many people here do. I mean don't get me wrong they have a lot of power and its so sick but I just wanted to here that motor scream and trust me it does

07-22-2013, 07:35 AM	#275 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	awesome build!!!

07-24-2013, 07:32 AM	#279 (permalink)
ts-c63 Enthusiast Member Join Date: Feb 2011 Location: nyc/nj Posts: 384 Drives: 2012 370z 7At Rep Power: 14	post a couple videos if you can

07-24-2013, 03:31 PM	#280 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 13	I will post a video. I also have just ordered the zspeed underside diffuser. Today I will be buying the csf radiator as well. I live in a very hot climate so cooling is what's my focus now. I am going to go to Nissan today to see about swapping the oil pump for the nismo oil pump to help ensure oil flow at high rpm's.

07-24-2013, 03:41 PM	#282 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 13	Thanks for the info it just reaffirms the decision.

08-08-2013, 05:03 PM	#285 (permalink)
Luciano13 A True Z Fanatic Join Date: Mar 2013 Location: Canada Posts: 2,130 Drives: 2016 Solid Redz Rep Power: 245	Wicked build im thinking of building the internals as well before/if I go F.I. What kind of Horses and Torque we talking here with your N/A?? __________________ http://www.the370z.com/members-370z-...lid-red-z.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
John's 335i (Again) - 5/15/10	HKYStormFront	Other Vehicles	24	05-18-2010 04:40 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM
Papa John's To Give Away Free Pizza To Camaro Owners!	AK370Z	The Lounge (Off Topic)	22	08-25-2009 07:29 PM