SPOHN'S Journal II Track Demon Reborn

SPOHN · 04-26-2013, 04:38 PM

Quote:

Originally Posted by Sh0velMan

I just mean does it wiggle when you grab it and shake it? It is braced better?

The stock one will move a good +/- 1/4 to 3/8ths of an inch at least. That can be really hard on the master cylinder.

No wiggle at all. That's what I wasnt sort of saying. Because it's adjustable at all angle it bolts down in all angles so that being said it can't wiggle when tighten.

SPOHN · 04-27-2013, 04:45 PM

Two ordered

DB Gauges: Air Fuel Ratio Guage

SPOHN · 04-28-2013, 11:13 AM

This looks good.

GTM Motorsports*::*COOLING SYSTEM*::*GTM H.O. 14" Dual Fan Kit For Z34/V36 For Stock Radiator

Dzel · 04-28-2013, 11:14 AM

Nice!

Dzel · 04-28-2013, 11:50 AM

Are you going to install everything at the same time?

SPOHN · 04-28-2013, 12:01 PM

Quote:

Originally Posted by Dzel

Are you going to install everything at the same time?

Yes. My plans are the weekend after ZDays is to start tearing down the car for I have already sold my headers, TP's, and Gen 3 intakes. In that meantime I have several other plans I want to do. I'll also go ahead a heat wrap some vital electrical componets, change fuel injectors, and spark plugs. That's only a days work when I think about it.

I'll go ahead remove the oil pan and get it all cleaned up. Just the small things I know that has to be done. I've ordered a boost controller and two Innovative A/F gauges so I can go ahead and get those hooked up as much as possiable.

I'm installing a wind splitter, lexan windows, and want to clean the inside my car out more to have it painted to give it a overall cleaner look.

Dzel · 04-28-2013, 12:04 PM

I hope we see a date soon I would hate for your car to sit there with no oil for to long

SPOHN · 04-28-2013, 12:21 PM

Quote:

Originally Posted by Dzel

I hope we see a date soon I would hate for your car to sit there with no oil for to long

It will be fine. I've already been told a somewhat time.

Mr&Mrs · 04-28-2013, 01:12 PM

I may have missed it...do you have any plans for a rear diffuser?

SPOHN · 04-28-2013, 01:40 PM

Quote:

Originally Posted by Mr&Mrs

I may have missed it...do you have any plans for a rear diffuser?

I eventually do. A friend of mine is going to do it when time fits. He's very good and been doing aero designs ever since he was 12, literally.

Dzel · 04-28-2013, 01:45 PM

Quote:

Originally Posted by SPOHN

It will be fine. I've already been told a somewhat time.

I can't say that I am not semi jealous.

SPOHN · 05-12-2013, 04:16 PM

Think my diff bushing is busted. Been hearing some sounds from that are the last few days. Then after looking and knowing this is a common problem I checked the bushing out. Look like there is a small crease on the bottom side of the bushing from where the weight is pulling down on it. Felt around and there is wet black substance around it. Also some on the diff. Last time I drove it was in the rain so a good bit must likely washed away.

So what does this mean. MOD TIME

Sorry for cell pics

sig11 · 05-12-2013, 04:53 PM

Nasty. I have to admit I haven't looked at those bushings in months... wonder what mine look like.

SPOHN · 05-12-2013, 05:12 PM

I don't feel anything odd in the rear just would hear some noise from time to time on uneven surfaces. It will be ok for till after Zdayz. But I'm about to order now. I believe by swapping to the Poly motor/ tranny mounts and last track day but the final stress on this bushing. Being I'm tearing down my car after Zdayz for my TT I'll just add this to the list. I love modding.

Rusty · 05-12-2013, 10:29 PM

Which bushing set you going with? Solid or poly?

04-27-2013, 04:45 PM	#437 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Two ordered DB Gauges: Air Fuel Ratio Guage __________________

04-28-2013, 11:13 AM	#438 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	This looks good. GTM Motorsports::COOLING SYSTEM::GTM H.O. 14" Dual Fan Kit For Z34/V36 For Stock Radiator __________________

04-28-2013, 11:14 AM	#439 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Nice! __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-28-2013, 11:50 AM	#440 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Are you going to install everything at the same time? __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-28-2013, 12:04 PM	#442 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	I hope we see a date soon I would hate for your car to sit there with no oil for to long __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-28-2013, 01:12 PM	#444 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,197 Drives: RZ34 Rep Power: 28585	I may have missed it...do you have any plans for a rear diffuser? __________________ Project Z <--Click - Check out the link too many mods to list!

05-12-2013, 04:16 PM	#447 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Think my diff bushing is busted. Been hearing some sounds from that are the last few days. Then after looking and knowing this is a common problem I checked the bushing out. Look like there is a small crease on the bottom side of the bushing from where the weight is pulling down on it. Felt around and there is wet black substance around it. Also some on the diff. Last time I drove it was in the rain so a good bit must likely washed away. So what does this mean. MOD TIME Sorry for cell pics __________________

05-12-2013, 04:53 PM	#448 (permalink)
sig11 A True Z Fanatic Join Date: Jun 2009 Location: Detroit Posts: 1,294 Drives: 09 370Z Red Sport-MT Rep Power: 18	Nasty. I have to admit I haven't looked at those bushings in months... wonder what mine look like.

05-12-2013, 05:12 PM	#449 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I don't feel anything odd in the rear just would hear some noise from time to time on uneven surfaces. It will be ok for till after Zdayz. But I'm about to order now. I believe by swapping to the Poly motor/ tranny mounts and last track day but the final stress on this bushing. Being I'm tearing down my car after Zdayz for my TT I'll just add this to the list. I love modding. __________________

05-12-2013, 10:29 PM	#450 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,943 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Which bushing set you going with? Solid or poly? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spohn's Journal	SPOHN	Member's 370Z Gallery	794	12-04-2012 08:42 AM
Forged Performance: SPOHN's Custom FP Spec 4-Point Cage	ChadB@Forged	Member's 370Z Gallery	24	02-16-2012 06:34 AM
Spohn's First track Day	SPOHN	Track / Autocross / Drifting / Dragstrip	72	09-30-2011 12:04 AM
Getting those demon bolts out..	ggiwin	Intake/Exhaust	11	09-05-2011 01:54 AM
Spohn's Blacked Out Tails (Pics)	SPOHN	Exterior & Interior	33	07-08-2011 10:30 AM