Nut_N_Much Journal

Huck · 04-22-2013, 01:39 AM

I got mine from iJDMtoy.com, they're projector LEDs. LEDs don't get hot, so you don't have to worry about damaging the housing.

Sent from my iPizzle using magic and new-fangled science stuff

Nut_N_Much · 04-22-2013, 07:54 AM

Quote:

Originally Posted by Huck

I got mine from iJDMtoy.com, they're projector LEDs. LEDs don't get hot, so you don't have to worry about damaging the housing.

For Halo's I use the http://www.theretrofitsource.com/pro...ducts_id=14906... Your right to swap out the bulbs with LED's. Will assist in life of your lights. Good thing is they are made for 12V..

Nut_N_Much · 04-22-2013, 06:26 PM

Update:

Kelly, again came over and we pulled the fuel pump and the intake.. To night install the new pump and the adapt.

After pulling it apart I found a bunch of crud in the swirl canister and on the filter. 60,000 miles will do that I guess..

Party foul, i started to install the new fuel pump and the DW I was sent is a 300 not a 340.. I will check and see what Mr. Squeeze thinks.. I think it will be fine, my injectors are 600 and I don't see maxing them out..

Intake out, finished modding the fuel rail..

So I took a break and my dog BooBoo was lookin like a criminal. I looked around and all the remotes were accounted for so I think I got him while he was thinking of doing something bad..

Nut_N_Much · 04-22-2013, 06:35 PM

Yep, checked Mr. Squeeze build log and he used a 600.. I'll be good, I thing if I used 850 injectors and started meth I would need the 340..

Zoren 370 · 04-22-2013, 06:56 PM

Joe do you have equipments needed to bleed my brake lines?
I do have SS brake lines.

MX52Z · 04-22-2013, 09:16 PM

Quote:

Originally Posted by Huck

I got mine from iJDMtoy.com, they're projector LEDs. LEDs don't get hot, so you don't have to worry about damaging the housing

Quote:

Originally Posted by Nut_N_Much

For Halo's I use the Morimoto xbALed Angel Eyes - Accessories from The Retrofit Source Inc... Your right to swap out the bulbs with LED's. Will assist in life of your lights. Good thing is they are made for 12V..

Thanks!

Mr&Mrs · 04-22-2013, 11:40 PM

Did you get the fuel starve set up? If a batch gets made again I need to get one ASAP. Last time I drove I hit fuel starve with only like 3 dots missing. Guess im corning to hard

Horrible flaw with this car.

Huck · 04-23-2013, 12:34 AM

Mr, is it when you take a left turn? I've taken right turns at 80+ sharp enough to lose grip and I've never had fuel starve.

Sent from my iPizzle using magic and new-fangled science stuff

Nut_N_Much · 04-23-2013, 07:32 AM

Quote:

Originally Posted by Zoren 370

Great!!! Do I need to get the Longacre Racing bottle or you have one too?
What would be a good weekend day for a DIY in your place?
Not this weekend though I do have work.

Come on dude, of course I got a bleed bottle.. I call it Water Bottle w/ 2 Clear Lines in to the Cap System

Quote:

Originally Posted by MX52Z

Thanks!

Anytime brother, can't wait to meet you, anyone that does his own work is a hero to me.

Quote:

Originally Posted by Mr&Mrs

Did you get the fuel starve set up? If a batch gets made again I need to get one ASAP. Last time I drove I hit fuel starve with only like 3 dots missing. Guess im corning to hard

Horrible flaw with this car.

I was on the phone with CJM this morning Charles said for my set up a return system may be more beneficial. You should give him a call 331-442-6780, good people.

Quote:

Originally Posted by Huck

Mr, is it when you take a left turn? I've taken right turns at 80+ sharp enough to lose grip and I've never had fuel starve.

Robs running a twin turbo, way more fuel flow with our shitty swirl canister causing starvation.. The dual pick ups on the CJM combined with the return kit would fix that problem.

When you add the cost up it may be cheaper to just get there replacement pump assembly. High quality anodized aluminum.. Bad A$$ !!! My system wont have enough balls to benefit from it..

Nut_N_Much · 04-23-2013, 07:39 AM

Tuesday Pic:

Remember this !!!!!! It may save your extremity

.

Mr&Mrs · 04-23-2013, 03:03 PM

Huck as Joe said part of it is the fact I am TT. The biggest problem is sweeping right hand turns not just for TT but almost anyone that tracks with less than 3/4 of a tank.

Also after you take the corner are you gaining speed or applying more gas? It will be more dominate like that as well. If you just slam through a corner and lose speed or dont call for more (more gas) it may not cause an issue you can notice. Turning that fast on a righty though with low fuel its hard to believe it hasnt hit you in some form.

Be careful and dont get stuck in limp mode.

Quote:

Originally Posted by Huck

Mr, is it when you take a left turn? I've taken right turns at 80+ sharp enough to lose grip and I've never had fuel starve.

Sent from my iPizzle using magic and new-fangled science stuff

Huck · 04-23-2013, 11:23 AM

Hahahaha

Sent from my iPizzle using magic and new-fangled science stuff

Nut_N_Much · 04-23-2013, 12:58 PM

Check this guy out.. Thinks he is working on truck

.. This is Kelly, again he came over to help out.

TB Coolant Delete to throttle bodies DONE! Thanks to (WSTAR) an his DIY, perfect. Thank you sir!!! DIY: TB Coolant Delete That was the easiest mod I ever did.. Of course Kelly did all the work.. Thanks bud for helping out/doing it all

.

So today we got the pump mounted and the brackets for the heat exchanger modified to fit. Also got the coolant over flow removed. I think this was a G35 kit to start with. We have had to modify a bunch of stuff and the pulley for the SC was the wrong shaft size..

Next:

I have to peal back the TB wiring and move it over to the left side, finish the injectors, re-install the fuel pump, move the battery. Try to do tomorrow..

Tonight I'm gonna make some money

.. I'm going to re-wrap my Gen 3 intake and basket weave with stainless wire, add on the Z1 couplers, add a baggy with nice Hex head MAF screws and post it for sale in the classifieds.

Again a shout out to Kelly for being my hands, you rock, any body who doesn't think so remember I shoot 1000 yard matches all the time

Lol..

Nut_N_Much · 04-23-2013, 03:13 PM

Few pics of the TB and the hoses we removed as well as the pump we installed.

Aslo a nice PG13 motivation pic..

MX52Z · 04-23-2013, 03:16 PM

Can I have some more motivation please?

04-22-2013, 01:39 AM	#1 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 43 Posts: 5,075 Drives: Pantydropper machine Rep Power: 35	I got mine from iJDMtoy.com, they're projector LEDs. LEDs don't get hot, so you don't have to worry about damaging the housing. Sent from my iPizzle using magic and new-fangled science stuff __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

04-22-2013, 06:26 PM	#3 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 28	Update: Kelly, again came over and we pulled the fuel pump and the intake.. To night install the new pump and the adapt. After pulling it apart I found a bunch of crud in the swirl canister and on the filter. 60,000 miles will do that I guess.. Party foul, i started to install the new fuel pump and the DW I was sent is a 300 not a 340.. I will check and see what Mr. Squeeze thinks.. I think it will be fine, my injectors are 600 and I don't see maxing them out.. Intake out, finished modding the fuel rail.. So I took a break and my dog BooBoo was lookin like a criminal. I looked around and all the remotes were accounted for so I think I got him while he was thinking of doing something bad.. Willy likes this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html Last edited by Nut_N_Much; 04-22-2013 at 06:29 PM.

04-22-2013, 06:35 PM	#4 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 28	Yep, checked Mr. Squeeze build log and he used a 600.. I'll be good, I thing if I used 850 injectors and started meth I would need the 340.. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

04-22-2013, 06:56 PM	#5 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913655	Joe do you have equipments needed to bleed my brake lines? I do have SS brake lines. Nut_N_Much likes this.

04-22-2013, 11:40 PM	#7 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31942	Did you get the fuel starve set up? If a batch gets made again I need to get one ASAP. Last time I drove I hit fuel starve with only like 3 dots missing. Guess im corning to hard Horrible flaw with this car. __________________ Project Z <--Click - Check out the link too many mods to list!

04-23-2013, 12:34 AM	#8 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 43 Posts: 5,075 Drives: Pantydropper machine Rep Power: 35	Mr, is it when you take a left turn? I've taken right turns at 80+ sharp enough to lose grip and I've never had fuel starve. Sent from my iPizzle using magic and new-fangled science stuff __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

04-23-2013, 07:39 AM	#10 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 28	Tuesday Pic: Remember this !!!!!! It may save your extremity . __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

04-23-2013, 11:23 AM	#12 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 43 Posts: 5,075 Drives: Pantydropper machine Rep Power: 35	Hahahaha Sent from my iPizzle using magic and new-fangled science stuff __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

04-23-2013, 12:58 PM	#13 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 28	Check this guy out.. Thinks he is working on truck .. This is Kelly, again he came over to help out. TB Coolant Delete to throttle bodies DONE! Thanks to (WSTAR) an his DIY, perfect. Thank you sir!!! DIY: TB Coolant Delete That was the easiest mod I ever did.. Of course Kelly did all the work.. Thanks bud for helping out/doing it all . So today we got the pump mounted and the brackets for the heat exchanger modified to fit. Also got the coolant over flow removed. I think this was a G35 kit to start with. We have had to modify a bunch of stuff and the pulley for the SC was the wrong shaft size.. Next: I have to peal back the TB wiring and move it over to the left side, finish the injectors, re-install the fuel pump, move the battery. Try to do tomorrow.. Tonight I'm gonna make some money .. I'm going to re-wrap my Gen 3 intake and basket weave with stainless wire, add on the Z1 couplers, add a baggy with nice Hex head MAF screws and post it for sale in the classifieds. Again a shout out to Kelly for being my hands, you rock, any body who doesn't think so remember I shoot 1000 yard matches all the time Lol.. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html Last edited by Nut_N_Much; 04-23-2013 at 01:04 PM.

04-23-2013, 03:16 PM	#15 (permalink)
MX52Z Enthusiast Member Join Date: Dec 2012 Location: Port Charlotte, FL Posts: 471 Drives: Z'less por ahora Rep Power: 14	Can I have some more motivation please?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 03:30 PM
PG6Speeds Journal	pg6speed	Member's 370Z Gallery	19	12-21-2011 10:21 PM
Cmike2780's Journal	Cmike2780	Member's 370Z Gallery	9	06-29-2011 11:17 PM
tag journal with car color	bflosabre91	The370Z.com Feedback, Suggestions & Questions	1	05-12-2011 12:46 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM