Nut_N_Much Journal

Mr&Mrs · 11-10-2012, 01:55 PM

Just so you know for my headlights I drilled one hole in the top where they mount onto the fender and just put a push clip in it (like the ones in the fender liner and such), that is plenty secure. The screw on top of the radiator and the one underneath are the main ones. Read my post above this one in case you missed it, that could be why the headlight wont go back more.

Nut_N_Much · 11-10-2012, 01:57 PM

Quote:

Originally Posted by Mr&Mrs

I just noticed something else that picture with the yellow clip. It does not go there! The headlight has a tab that slides into that spot. The yellow clip goes on the other side of that white bracket and the corner of the bumper attaches to it (it faces down towards the ground).

Ya, I sat there like a dummy for 30 min looking at it to figure out why the light wouldn't go in all the way.. Haaaa!!

Mr&Mrs · 11-10-2012, 02:03 PM

sorry I didnt notice when I first looked haha! You never said anything about the square white clip at the bottom front of the factory fender. How was that?

Quote:

Originally Posted by Nut_N_Much

Ya, I sat there like a dummy for 30 min looking at it to figure out why the light wouldn't go in all the way.. Haaaa!!

Nut_N_Much · 11-10-2012, 02:05 PM

Quote:

Originally Posted by Mr&Mrs

sorry I didnt notice when I first looked haha! You never said anything about the square white clip at the bottom front of the factory fender. How was that?

Took a little effort to get it out, but filed out the hole and stuck in in. Had to brace it from the rear to screw into it..

I just gotta be patient.

Mr&Mrs · 11-10-2012, 02:07 PM

I almost ripped my finger off the first time, and all the way to the fourth time gave me a fight. I HATE that clip!

Nut_N_Much · 11-10-2012, 02:11 PM

Quote:

Originally Posted by Mr&Mrs

I almost ripped my finger off the first time, and all the way to the fourth time gave me a fight. I HATE that clip!

No gain without pain, I'm gonna set the impeller on the SC on fire

to shift gears before I break something..

I'll be back in a couple of hours with some updates. Thanks for the help brother!!

Nut_N_Much · 11-10-2012, 05:12 PM

Update:
The pulleys are off, COGS are on...

SC is apart..

Painted ..

Impeller off..

Impeller on..

Will continue the pain in the a_s fenders tomorrow!!! Shout out to Mr. Squeeze for SC info and Kelly and Robert for helping out with the fenders...

Mr&Mrs · 11-10-2012, 07:14 PM

Nut_N_Much · 11-11-2012, 10:57 AM

Okay, the passenger side fit much better. Went on in 10 mins. A little filing and some washers and shes as close as my skill level can get.

Some pics of passenger side:

I am still having trouble with the driver side. This fiber glass seems to be crap and is braking apart under any pressure. If you have the time save up and bye a high quality kit. You will enjoy it much more and so will your bodywork shop..

Mr&Mrs · 11-11-2012, 10:59 AM

Problem is the same company makes all these different fenders. I also find it funny in my recent searching that the driver side has been the problem for most people.

When you get the wheel well back in the gap by the light pretty much goes away because light cant come thru the back of it.

Nut_N_Much · 11-11-2012, 11:15 AM

That's good to know. I'm debating whether or not to leave them on for a while to see if that Drivers side cracks or not. I still haven't herd back from Martin at ZFever for the Dyno

time but should be soon. I can take them off while installing the Stillen Kit.

I don't want to do a butt load of work and spend more money and have them crack like so many others.

otacon88 · 11-11-2012, 12:40 PM

that turbo is looking pretty sick! so are those fenders! We need a tampa meet up soon

Mr&Mrs · 11-11-2012, 12:45 PM

Better do it while im on day shift so I can make it even if I have to work the next day!

Quote:

Originally Posted by otacon88

that turbo is looking pretty sick! so are those fenders! We need a tampa meet up soon

simota1 · 11-11-2012, 02:44 PM

even my carbon signal fenders had a HUGE problem with the driver side? i was so irritated and so was the body shop.... the passenger fit perfectly which didnt make sense... and those finger clips your talking about... i HATE those clips lol... i almost shaved my finger tips pulling on those damn clips lol

simota1 · 11-11-2012, 02:45 PM

btw on those turbo pics

11-10-2012, 01:55 PM	#106 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,194 Drives: RZ34 Rep Power: 18518	Just so you know for my headlights I drilled one hole in the top where they mount onto the fender and just put a push clip in it (like the ones in the fender liner and such), that is plenty secure. The screw on top of the radiator and the one underneath are the main ones. Read my post above this one in case you missed it, that could be why the headlight wont go back more. __________________ Project Z <--Click - Check out the link too many mods to list!

11-10-2012, 02:07 PM	#110 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,194 Drives: RZ34 Rep Power: 18518	I almost ripped my finger off the first time, and all the way to the fourth time gave me a fight. I HATE that clip! Nut_N_Much likes this. __________________ Project Z <--Click - Check out the link too many mods to list!

11-10-2012, 05:12 PM	#112 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	Update: The pulleys are off, COGS are on... SC is apart.. Painted .. Impeller off.. Impeller on.. Will continue the pain in the a_s fenders tomorrow!!! Shout out to Mr. Squeeze for SC info and Kelly and Robert for helping out with the fenders... Mr&Mrs likes this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

11-10-2012, 07:14 PM	#113 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,194 Drives: RZ34 Rep Power: 18518	__________________ Project Z <--Click - Check out the link too many mods to list!

11-11-2012, 10:57 AM	#114 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	2nd day fenders Okay, the passenger side fit much better. Went on in 10 mins. A little filing and some washers and shes as close as my skill level can get. Some pics of passenger side: I am still having trouble with the driver side. This fiber glass seems to be crap and is braking apart under any pressure. If you have the time save up and bye a high quality kit. You will enjoy it much more and so will your bodywork shop.. Mr&Mrs likes this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

11-11-2012, 10:59 AM	#115 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,194 Drives: RZ34 Rep Power: 18518	Problem is the same company makes all these different fenders. I also find it funny in my recent searching that the driver side has been the problem for most people. When you get the wheel well back in the gap by the light pretty much goes away because light cant come thru the back of it. Nut_N_Much likes this. __________________ Project Z <--Click - Check out the link too many mods to list!

11-11-2012, 11:15 AM	#116 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	That's good to know. I'm debating whether or not to leave them on for a while to see if that Drivers side cracks or not. I still haven't herd back from Martin at ZFever for the Dyno time but should be soon. I can take them off while installing the Stillen Kit. I don't want to do a butt load of work and spend more money and have them crack like so many others. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

11-11-2012, 12:40 PM	#117 (permalink)
otacon88 Base Member Join Date: May 2012 Location: Tampa, FL Posts: 155 Drives: Red 2012 Nissan 370z Rep Power: 13	that turbo is looking pretty sick! so are those fenders! We need a tampa meet up soon Mr&Mrs and Nut_N_Much like this. __________________ Performance: FI CBE 18inch resonators and CF mufflers \| Pending - CAI Show: CF License Plate Frame, Amuse Rear Bumper and side skirts, Seibon SR Front lip, Aerojacket Vented Fenders\| Pending - SSR Type F, Springs, Tint, Sport Rear spoiler

11-11-2012, 02:44 PM	#119 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	even my carbon signal fenders had a HUGE problem with the driver side? i was so irritated and so was the body shop.... the passenger fit perfectly which didnt make sense... and those finger clips your talking about... i HATE those clips lol... i almost shaved my finger tips pulling on those damn clips lol Mr&Mrs and Nut_N_Much like this. __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

11-11-2012, 02:45 PM	#120 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	btw on those turbo pics Nut_N_Much likes this. __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 03:30 PM
PG6Speeds Journal	pg6speed	Member's 370Z Gallery	19	12-21-2011 10:21 PM
Cmike2780's Journal	Cmike2780	Member's 370Z Gallery	9	06-29-2011 11:17 PM
tag journal with car color	bflosabre91	The370Z.com Feedback, Suggestions & Questions	1	05-12-2011 12:46 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM