Mike's Journal

Mike

First, I removed the door glass and inner moulding at the top of the door.

I then removed the regulator mechanism, and drilled a small hole and inserted a screw into the regulator arms to hold the window holders in their full up position. I cut the rear one down, but left the forward one full length.

The arms are only secured by one bolt on top, and can move to and fro. To secure them so the glass is fixed in the proper place while installed, on the front one, I used an existing stud on the arm, a metal strap and a hole where the speakers mount to locate the bottom of the arm in the proper position.

On the rear arm, I cut it down smaller and used a strap to locate it in place along with an existing bolt hole in the door.

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968