TravisJB Journal

travisjb

good explanation chris... i got it working last night by simply wiring 2-5 to a switch and 3-4 to a switch... interestingly, they both seem to do the same thing = low beams... you run either or both and LOW BEAMS... no idea why that is...

By the way, the numbering on this matrix is different than the pin numbering so for anyone using this chart make certain to look up connector number "m33" for an explanation of how the I/O maps to the pins

Also, I didn't use diodes... is that bad?

__________________
2009 370Z #104
*For Sale*

ChrisSlicks

The diodes are a safety to ensure that current only moves in the one designated direction. I would add them to prevent the chance of damaging the BCM. Just make sure it points from input to output, i.e. stripe side facing output.

__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms