I think its something like 32?

I did not replace the clutch, just the flywheel! Still using my South Bend Stage 4 clutch :)

Sweet jesus...

Ya I'm curious to hear how you like this flywheel, I might order the same thing

Looks like almost everything is in. Its being installed today. We are replacing the CSC because it was failing and clutch bolts as a precaution.

http://www.the370z.com/attachment.ph...1&d=1305658166

Gearbox taken down, Southbend Stg4 on display.

http://www.the370z.com/attachment.ph...1&d=1305658166

http://www.the370z.com/attachment.ph...1&d=1305658166


Fidanza Flywheel is out and luckily its almost completely unscathed.

http://www.the370z.com/attachment.ph...1&d=1305658166

Should be good about a little cleaning.

http://www.the370z.com/attachment.ph...1&d=1305658166

More pictures coming later.

Looking forward to the review

The competition clutch f/w is soooo much quieter than the fidanza, i installed one a few weeks back very nice piece plus its steel so thats a good peice of mind. Rauls car is coming out perfectly.

100??



* damn i want to be on top of page 100...fml

go into your settings and change the "post per page" settings to the maximum...this thread has 38 pages. :)

I know southbend makes a flywheel (dxd) I was wondering which flywheel to go with? I want a high quality piece that will not give me problems with the supercharger.

why would any flywheel give you any problems with the sc?

No not saying that, like you bought the fidanza and had to take it out due to problems. I want to buy something right the first time that I won't have to worry about. So I'm looking forward to hearing your review of the new flywheel.

As promised, second half of the install!

Upgraded metal ZSP CSC in:

http://www.the370z.com/attachment.ph...1&d=1305682159

PC Steel Flywheel in:

http://www.the370z.com/attachment.ph...1&d=1305682159

And shes running again :

http://www.the370z.com/attachment.ph...1&d=1305682159

According to Jay (Jnaut) the car is waaaaay quieter than it was before! Success.

yes, you can still hear the input shaft rattle, but when compared to the fidanza big difference.

Is that your shop Jnaut?

God damn, RCZ. That is a pretty car. TIA.

Thanks sig, I feel it looks incomplete still, but sooner or later I'll take care of the looks when I'm done with the go.

why? i like the way it looks already! :tup:

+ 1
I like the way it looks now.

Car looks good great job:tup:

I'm looking to get the Z-speed CSC soon as well just not sure on the clutch just yet. I am leaning towards the South Bend my self.

It's amazing how good a car looks when's its clean!

Yes, jon thats my home hahaha
seems like im there more than anywhere else :)

Squeeze Just a bit of info, but i have a brand new clutch master fx100 in box here at the shop (same one in my car) if you get it ill make you a good deal on the metal csc as i have a whole sale account with them :) :tup:

Its too bad you dont tune cars Jnaut, im thinking of going to hp logic to get my GTM Stg.2 s/c installed/tuned

Thanks Phelan and Z Force!

I like this clutch. The pedal feel is a bit stiffer, but the feel is linear from top to bottom. It's slippable and it holds a good amount of power. I can get a small discount off of the price of the southbends, but jnauts clutch is also a good one and its ready to go. He was planning on going turbo and bought the clutch for that application.

Ray! Damnit!

Jon: Jnauts shop is only a few minutes away from HP Logic. Get it installed by jnaut and then take it to HP for tuning with Jack. Those are the two people I always recommend.

I'm not sure that stage 1 clutch will hold up to the amount of power I am about to push. One thing I am trying to avoid is buying another clutch right away.

Nice - how much was the flywheel in the end?

It will, as clutch masters various stages is all in the dics its the same pressure plate even if you have stage 4. I have it in my car , :) trust me i beat the **** out of it... and it just ask for more. no biggie :tup:

If anyone needs a set of TPMS sensors, I have a set for sale. http://www.the370z.com/parts-sale-pr...ml#post1118853

At the track now...

http://i198.photobucket.com/albums/a...agejpeg952.jpg

How much do stock premium sport seats sell for??

well I have the base cloth seats and was offered $600 shipped for them, you could make an estimate off that. RCZ do you get a discount off the southbend flywheel as well?

I was just telling J today that I want your seats lol.

I was just telling Jay today that I want to sell them. Make me an offer Billy :)

I'm not sure what these go for, I haven't seen a set sold yet. I have the white premium sports though and have been dying for the black ones. I couldn't find a blue sport/touring/nav with black leather anywhere so I settled for white :(

I have no idea either man. I'm a little scared of losing the side air bags. I don't think I'd do it for less than $600 a seat. I have no idea what they should go for. Im sure they are thousands of dollars from Nissan.

Didn't Modshack sell his premium seats back when he upgraded to Sparcos? (This was of course when he still owned a Z, lol)

I'd have to look that up, but I don't remember.

FYI, people with upgraded clutches, prepare to have to fix your master cylinder too. My Car can barely go into gear now, going back to the shop next week.

Haha, mine just came back from Nissan today for that very reason.

aaand mine is going in this week :(

Did the upgraded csc fix the master cylinder problem

No, i am finding that the upgraded clutch and csc is making the clutch master angry. I would suggest replacing it along with the new clutch/csc to be on the safe side as i now have had 2 fail. no problem for my customers as i am in very good with my nissan dealership.

Oh and once again congrats raul, your car is a all-around awesome build.