my Drift build

igotaracecar

hey guys i relocated my battery and ended up 3D printing a little junction box cover thingy along with making a bracket to mount to the firewall. im posting this to find out if anyone would be intrested in buying something like this i did a lot of searching to see what people did and 99% of you just put the stock red cover on it and tip tied it away. not only is that extreamly ugly but its also unsafe. so if i can get some people who would like to see me make these then i would be more then happy to sell them. also the top of the box is removable to easily disconnect everything

Sent from my SM-G920P using Tapatalk

noonanr1

When you wired up switches for the brake lamp and abs which wire did you tap into? I already wired up a switch to the yaw sensor and have that working perfectly.

igotaracecar

for the brake lamp i hacked in to the pink wire on terminal 122 of the ecm connector m107 you can wire in a switch or just snip it. i sniped mine. it has no effect on the brake lamp or anything but you can do standing burnouts all day!! and for the abs i went in to the fuse box that is in the engine bay and de-pined it and wired in a inline fuse to a switch..ran the car for a year like this and had 0 problems. now its back under the knife so i changed it all up and made my own harness and took out the entire abs system along with the vdc system. pic is of the wire for the brake lamp.

Sent from my SM-G920P using Tapatalk