Built a new "high" end parking spot for the Z today

POS VETT

I'm in the same boat. Everything is fitting within a few inches of clearance. Garage door in retracted position to the nose of the car on the lift, roof of car to the lift underside, rear bumper of car on lift to back wall is measured in less than one inch, one side tires of car on lift to the lift itself, hood of car to ceiling.

Hell, even the truck fits in the garage with 2" to the wall and under 2" to the garage door. The truck headlight sits only about 3" or less from the lift reservoir. Left side truck OSRV mirror has to be folded when driving into garage and the right side clears the lift column by 2-3".

Parking a car under the lift requires finesse or right side OSRV mirror would scrape. Each car must be perfectly placed under the lift or it will bump, scrape, or damage an immovable object inside the garage. I also have to be on top of snow removal so driveway is free of ice, so the vehicle being "loaded" into the garage doesn't spin its rear tires and send its side kissing and crunching the garage door framework since clearance is mere few inches on both sides.

Each vehicle has an assigned parking stop. Misplaced or setting the stop for a wrong vehicle means pseudo disaster of various consequences. If one (or more) of those bolts or nuts holding the lift lock plate failed or one of the cables snapped, it would make for a very very bad day in a blink of an eye. Imagining one makes me cringe and shudder.