The New "What did you do with your Z today" (with off topic replies) IV

GaleForce · 02-23-2013, 02:17 PM

Quote:

Originally Posted by kenchan

hi everyone!

hi mr.alcheng-

i vac'ed my music room and rest of 1st floor yesterday, just got done with 2nd floor. had lots of errands and house chores to do this am. at least i got to go to homedepot.

hope your business is booming today (not with taffyapples btw).

Taffyapples have money too! I think Mr.alcheng will take their money without issue

GJ on the vac'ing. I just finished up 90% and of my vac'ing 100% of the dusting. Two bedrooms left to vacuum then I can take a break.

For some reason this song is running through my head...

Isamu · 02-23-2013, 02:44 PM

Quote:

Originally Posted by GaleForce

Taffyapples have money too! I think Mr.alcheng will take their money without issue

Taffyapples need love too, but they gotta pay! lol

alcheng · 02-23-2013, 02:47 PM

Quote:

Originally Posted by GaleForce

Taffyapples have money too! I think Mr.alcheng will take their money without issue

GJ on the vac'ing. I just finished up 90% and of my vac'ing 100% of the dusting. Two bedrooms left to vacuum then I can take a break.

on the taffyapples

Sometimes there's some customers which are pain pain pain in the butt and you almost want to give up.....

But there's always this voice pops-up in the last moment...:

"dude.... you have to pay the rent....."

~~~ or ~~~

"dude.... even if you can suffer the hunger.... how about the Z....?"

~~~ then ~~~

"alright taffytapple..... let's close the deal....."

Nismo89 · 02-23-2013, 12:05 PM

Quote:

Originally Posted by Pintsize725

Tire is fine. Tech says just a reason to get new rims.

GaleForce · 02-23-2013, 12:48 PM

Good afternoon Mr.Alcheng

How's business today?

alcheng · 02-23-2013, 01:30 PM

Quote:

Originally Posted by LMBmikeZ

another busy day for me, hopefully I will have more time tonight to check other threads I'll be missing, I know I won't be able to keep up in here

I have had enough of this weather........

I like it! SOLD .........did you decide if that's what your doing?

Mike!!!

Quote:

Originally Posted by GaleForce

Good afternoon Mr.Alcheng

How's business today?

Mr.GaleForce

Business is not too bad for now, good enough to delay my rep-spreading activity... so it's

and

Gonna have some more testing on the R/C tonight, trying out a different controller/radio, will try couple more different setup too...

Hopefully I can have more F1 time next week since the testing for the R/C is almost done.

6MT · 02-23-2013, 01:38 PM

'afternoon b1tches! Just got home from the B&B. great time at the pub last night. Did 2 pubs with almost 20 of us. But me being old... I bailed at 11:00. An hour and a half ahead of the wifey who's supposed to be recovering. She did great!

So...beautiful day here. Just serviced my son's car and took Mary-kitty out for a chew in the forest. Very sunny and bright today.

eastwest2300 · 02-23-2013, 02:07 PM

Hey fellas, i've been messing with this oem shift knob trying to remove it.. im praying to the lord that I didnt mess it up, here's the deal, the oem knob is still on the car, and its mangled.. theres no going back now.

I wrapped it in a towel and used an oil filter/scissor type tool thats got teeth on it, it grabs the knob very well, my question is, if I lift up the panel that has the hazard button on it, am I also holding that thick cylinder piping that leads down to the shift boot?

GaleForce · 02-23-2013, 02:20 PM

Quote:

Originally Posted by eastwest2300

Hey fellas, i've been messing with this oem shift knob trying to remove it.. im praying to the lord that I didnt mess it up, here's the deal, the oem knob is still on the car, and its mangled.. theres no going back now.

I wrapped it in a towel and used an oil filter/scissor type tool thats got teeth on it, it grabs the knob very well, my question is, if I lift up the panel that has the hazard button on it, am I also holding that thick cylinder piping that leads down to the shift boot?

Yes, if you can.

Pintsize725 · 02-23-2013, 02:38 PM

Quote:

Originally Posted by LMBmikeZ

another busy day for me, hopefully I will have more time tonight to check other threads I'll be missing, I know I won't be able to keep up in here

I have had enough of this weather........

I like it! SOLD .........did you decide if that's what your doing?

Yup, that is the route I'm going. Will still be a few months though.

So the wrap company I had my lights done at finally took action after I filed a chargeback. I met with the owner just now who is going to redo the tails, fix some bubbles on the front, and going to tint the car for my troubles. :eyeroll: We will see how it goes.

Isamu · 02-23-2013, 02:39 PM

Quote:

Originally Posted by Pintsize725

Yup, that is the route I'm going. Will still be a few months though.

So the wrap company I had my lights done at finally took action after I filed a chargeback. I met with the owner just now who is going to redo the tails, fix some bubbles on the front, and going to tint the car for my troubles. :eyeroll: We will see how it goes.

LMBmikeZ · 02-23-2013, 02:43 PM

Quote:

Originally Posted by GaleForce

Taffyapples have money too! I think Mr.alcheng will take their money without issue

GJ on the vac'ing. I just finished up 90% and of my vac'ing 100% of the dusting. Two bedrooms left to vacuum then I can take a break.

Good job my fellow cleaners I have also been vac'ing and cleaning the house. I am also much happier now though cause my buddy bailed on the work I was going to help him with this afternoon, so after cleaning I only need to go grocery shopping and my day is done! Time to chill and hang around the house! Probably use my time for some guitar playing and forum whoring

Also agree that mr. alcheng would take the taffyapples money np! I know I do/would when they want work done

Quote:

Originally Posted by GaleForce

I love most forms of auto racing but cannot get into Nascar, I'm not sure why. I do try to watch the Daytona race every year. I hear its way better to see live.

plus I have some co-workers that are really into it, but I know nothing about it nor do I try to invest anytime into just not interested...........

eastwest2300 · 02-23-2013, 02:57 PM

Hey thanks fellas, I ran to advance auto parts, and grabbed some vice grips, and used that other tool I had, I just finished getting the knob off... what a pain in the azz. My oem knob is fvcked.

GaleForce · 02-23-2013, 03:13 PM

Quote:

Originally Posted by eastwest2300

Hey thanks fellas, I ran to advance auto parts, and grabbed some vice grips, and used that other tool I had, I just finished getting the knob off... what a pain in the azz. My oem knob is fvcked.

Oh well, that happens. Now comes the easy part

when you're done.

LMBmikeZ · 02-23-2013, 03:13 PM

Quote:

Originally Posted by GaleForce

Oh well, that happens. Now comes the easy part

when you're done.

of the new one!

02-23-2013, 12:48 PM	#5 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Good afternoon Mr.Alcheng How's business today? __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

02-23-2013, 01:38 PM	#7 (permalink)
6MT A True Z Fanatic Join Date: May 2009 Location: ITU Zone 2 Posts: 22,459 Drives: Reliant Robin Rep Power: 1791	'afternoon b1tches! Just got home from the B&B. great time at the pub last night. Did 2 pubs with almost 20 of us. But me being old... I bailed at 11:00. An hour and a half ahead of the wifey who's supposed to be recovering. She did great! So...beautiful day here. Just serviced my son's car and took Mary-kitty out for a chew in the forest. Very sunny and bright today. __________________ Andrew 2009 370Z Sport/Touring 6MT sold 2013 Honda Civic Si coupe D/D

02-23-2013, 02:07 PM	#8 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 91,026 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684552	Hey fellas, i've been messing with this oem shift knob trying to remove it.. im praying to the lord that I didnt mess it up, here's the deal, the oem knob is still on the car, and its mangled.. theres no going back now. I wrapped it in a towel and used an oil filter/scissor type tool thats got teeth on it, it grabs the knob very well, my question is, if I lift up the panel that has the hazard button on it, am I also holding that thick cylinder piping that leads down to the shift boot? __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

02-23-2013, 02:57 PM	#13 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 91,026 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684552	Hey thanks fellas, I ran to advance auto parts, and grabbed some vice grips, and used that other tool I had, I just finished getting the knob off... what a pain in the azz. My oem knob is fvcked. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) III	happytheman	The Lounge (Off Topic)	9956	02-10-2013 02:13 PM
The New "What did you do with your Z today" (with off topic replies) II	happytheman	The Lounge (Off Topic)	10004	12-24-2012 07:31 PM
The New "What did you do with your Z today" (with off topic replies)	happytheman	The Lounge (Off Topic)	10265	10-31-2012 11:15 PM
We learned a valuable lesson about the "VDC OFF" button today thanks to b1ades	birdmanx1	Mid-Atlantic Region	167	09-01-2011 09:50 AM
got to autocross a couple different"high end" cars today	MC	Other Vehicles	15	06-13-2009 07:48 PM