Anyone here into firearms?

VABAM · 02-04-2020, 03:03 PM

Quote:

Originally Posted by ZeeingAround

Anyone here own a Glock 17? Your thoughts?

I have a 19 which is slightly smaller than the 17. Not my favorite pistol, prefer one of my H&Ks over it, but it has been very reliable, accurate, and I trust my life to it. Tons of mods and accessories out there for them. Glocks are like the Honda Civics of the gun world. They are nothing special but they are reliable, unless you mod them, and the fanboys can be annoying too.

tvfreakazoid · 02-04-2020, 04:16 PM

Quote:

Originally Posted by VABAM

Been interested in getting one too. More specifically the Charging Rhino 60DS.

What's the charging rhino?

Sent from my SM-G965U1 using Tapatalk

VABAM · 02-04-2020, 04:58 PM

Quote:

Originally Posted by tvfreakazoid

What's the charging rhino?

Sent from my SM-G965U1 using Tapatalk

It's a 6" barreled Rhino chambered in 9mm that is DAO. The double action in this gun is a lot lighter than the standard Rhino and is meant for 3 gun style competition shooting and it uses moon clips for faster reloading. Also you can buy parts from Chiappa to make the trigger even lighter but it is recommended that a gunsmith install them. Down side is not all ammo can be fired through it. Even the trigger that comes with it might have a difficult time with hard primers.

www.chiappafirearms.com Charging Rhino DS60

tvfreakazoid · 02-04-2020, 05:00 PM

Quote:

Originally Posted by VABAM

It's a 6" barreled Rhino chambered in 9mm that is DAO. The double action in this gun is a lot lighter than the standard Rhino and is meant for 3 gun style competition shooting and it uses moon clips for faster reloading. Also you can buy parts from Chiappa to make the trigger even lighter but it is recommended that a gunsmith install them. Down side is not all ammo can be fired through it. Even the trigger that comes with it might have a difficult time with hard primers.

www.chiappafirearms.com Charging Rhino DS60

I thought there was 1 where u can switch to 9mm and 357.

Sent from my SM-G965U1 using Tapatalk

VABAM · 02-04-2020, 07:31 PM

Quote:

Originally Posted by tvfreakazoid

I thought there was 1 where u can switch to 9mm and 357.

Sent from my SM-G965U1 using Tapatalk

Yes, there is but they are rare and I think they discontinued them. They are not listed on their website but I found the part numbers in a manual (see attached pic). I found a few floating around on the web but they are mostly sold out and I only really found the CF340.238, the 40DS variant.

tvfreakazoid · 02-04-2020, 08:37 PM

Ah. I guess it wasnt popular enough.
That would of been nice if they pushed that more

Sent from my SM-G965U1 using Tapatalk

solidus · 02-04-2020, 09:55 PM

Quote:

Originally Posted by ZeeingAround

Anyone here own a Glock 17? Your thoughts?

You might want to hold off a minute. Palmetto State Armory just showed off the PS9 Dagger at Shot. During some of the interviews they mentioned that it would be compatible in the future with a longslide conversion. At a base of 299.00 it's gonna be a juggernaut considering it's basically a customized Polymer 80. You'll be able to swap in anything you could swap into a glock and the RMR slide cut version will be icing on the cake. If you look at a firearm as the tool it is, Glocks are basically the equivalent of having Craftsman tools vs. Snap-on. They get the job done, the reliable and a better option than Harbor Freight.

Side note: One of my "Cop Nightmares" was getting shot and killed with a Lorcin .25 . I actually had that nightmare for years along with my gun firing slow motion bullets, or bullets that dropped before they hit. But the worst was always getting killed with a chrome Lorcin with pink pearl grips. Weird.

Rusty · 02-04-2020, 10:06 PM

Quote:

Originally Posted by solidus

You might want to hold off a minute. Palmetto State Armory just showed off the PS9 Dagger at Shot. During some of the interviews they mentioned that it would be compatible in the future with a longslide conversion. At a base of 299.00 it's gonna be a juggernaut considering it's basically a customized Polymer 80. You'll be able to swap in anything you could swap into a glock and the RMR slide cut version will be icing on the cake. If you look at a firearm as the tool it is, Glocks are basically the equivalent of having Craftsman tools vs. Snap-on. They get the job done, the reliable and a better option than Harbor Freight.

Side note: One of my "Cop Nightmares" was getting shot and killed with a Lorcin .25 . I actually had that nightmare for years along with my gun firing slow motion bullets, or bullets that dropped before they hit. But the worst was always getting killed with a chrome Lorcin with pink pearl grips. Weird.

I have 2 Raven .25 ACP's.

One with the wood grips, and one with the pink pearl grips. Both were my parents pistols.

solidus · 02-04-2020, 10:20 PM

Quote:

Originally Posted by Rusty

I have 2 Raven .25 ACP's.

One with the wood grips, and one with the pink pearl grips. Both were my parents pistols.

I'ma need you to leave the pink on home.

ZeeingAround · 02-29-2020, 09:11 PM

The best thing about winter is freezing 5 gallon buckets of water and then shooting ice with every gun in the arsenal.

Chuck33079 · 03-18-2020, 08:28 AM

Just in case you thought you were going to steal my toilet paper hoard, I’ve picked up a new toy.

Sent from my iPhone using Tapatalk

Ghostvette · 03-18-2020, 08:37 AM

Quote:

Originally Posted by Chuck33079

Just in case you thought you were going to steal my toilet paper hoard, I’ve picked up a new toy.

Sent from my iPhone using Tapatalk

Shockwave? I've heard that the shorty 12 gauge rounds work well with the adapter on the cartridge lifter (I think that's what their calling it).
In case you need it... here's the link.

https://opsolmini-clip.com

Chuck33079 · 03-18-2020, 08:43 AM

Quote:

Originally Posted by Ghostvette

Shockwave? I've heard that the shorty 12 gauge rounds work well with the adapter on the cartridge lifter (I think that's what their calling it).
In case you need it... here's the link.

https://opsolmini-clip.com

It's the 870. Apparently it has problems ejecting the minishells. Someone will figure out how to make it work, and then I'll buy the second one.

Rusty · 03-18-2020, 08:44 AM

Shoot some Dragon's Breath out of it.

Chuck33079 · 03-18-2020, 08:47 AM

Quote:

Originally Posted by Rusty

Shoot some Dragon's Breath out of it.

It's an INDOOR defense weapon.

02-04-2020, 08:37 PM	#5451 (permalink)
tvfreakazoid A True Z Fanatic Join Date: Jan 2009 Location: kommie kali Posts: 1,238 Drives: 2015 Audi S5; 6spd. Rep Power: 10324	Ah. I guess it wasnt popular enough. That would of been nice if they pushed that more Sent from my SM-G965U1 using Tapatalk VABAM likes this. __________________ Mudders milk

02-29-2020, 09:11 PM	#5455 (permalink)
ZeeingAround A True Z Fanatic Join Date: Dec 2010 Location: Michigan Posts: 6,365 Drives: 3500 NVP 370Z-sold! Rep Power: 86623	The best thing about winter is freezing 5 gallon buckets of water and then shooting ice with every gun in the arsenal. VABAM, JARblue, Rusty and 2 others like this. __________________ Get some roosters for eggs and Bulls for milk . Then you will see that gender matters. Especially at milking time.

03-18-2020, 08:28 AM	#5456 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	Just in case you thought you were going to steal my toilet paper hoard, I’ve picked up a new toy. Sent from my iPhone using Tapatalk VABAM, JARblue, Rusty and 2 others like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

03-18-2020, 08:44 AM	#5459 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,852 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Shoot some Dragon's Breath out of it. VABAM and JARblue like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html