Anyone here into firearms?

Nismo89 · 02-17-2015, 03:50 PM

Quote:

Originally Posted by Scott@Synergy

What's the total you have into that? Pretty damn affordable 338 right?

in terms of Barrett yea but with the same accuracy yes, the gun itself was $1,550 ( with the H & S precision stock)... the scope is a Vortex PST 6x30x50 tactical Scope with MOA redial ( $1,100 ) so in total so far, total investment is around $2,600 plan to add a bipod as well.

and like I said before......

$2,600 vs $9-10k Barrett, minus a scope for it.... but with the same accuracy as the Barrett and ALOT lighter

the Savage 110 FCP 338 Lapua Magnum is a bargain

370zseth · 02-17-2015, 04:09 PM

Price of ammo any more makes it almost impossible outside of work.

Meulen · 02-18-2015, 08:52 AM

New carry piece picked up last night after some trigger work. Gonna get some trijicon HDs for it next and maybe a cerakote

Rusty · 02-19-2015, 07:03 AM

Quote:

Originally Posted by Meulen

New carry piece picked up last night after some trigger work. Gonna get some trijicon HDs for it next and maybe a cerakote

If you reload for it. You're have a hard time. It like to bugle the case, as it's unsupported at the head. The wife's pistol, I can't because it's too bad. Even sent the pistol back to S&W. They said it was ok. If you're using P+'s. Watch the heads on the brass. This is only for the 9mm.

The place for parts for it.

Welcome to Apex Tactical Specialties, Inc.

Rusty · 02-19-2015, 07:17 AM

Quote:

Originally Posted by Bulletz4break

.223/556 ammo ban

What's Going on with M855, Why It Matters, and What You Can Do - Monderno

Quote:

Originally Posted by Scott@Synergy

Just bought PMC green tip at 9.98 a box and last month it was 7.98.

Quote:

Originally Posted by tvfreakazoid

Here comes the price gouge

Quote:

Originally Posted by Tigger

This **** is retarded. Seriously. The last time there was a scare the only thing it did was serve to better arm the entire country. They're at it again. It won't get banned. They're just creating hype. I don't know who is benefitting from this nonsense but the ammo dealers are certainly making a killing. Glad I don't use this round anymore. The hype has really gotten out of control.

I ordered 20lbs of powder last May. So far I only have gotten 10lbs of that order. 2- one lb cans Reloader22, and 4350, and 1-8lb can of ARComp. Still waiting on 8lbs of TAC, and 2 lbs of something that I now forgotten.

And the price has gone up since I ordered it.

Tigger · 02-19-2015, 10:27 PM

Quote:

Originally Posted by Rusty

I ordered 20lbs of powder last May. So far I only have gotten 10lbs of that order. 2- one lb cans Reloader22, and 4350, and 1-8lb can of ARComp. Still waiting on 8lbs of TAC, and 2 lbs of something that I now forgotten.

And the price has gone up since I ordered it.

Wait for this next scare to blow over. Give it another 2-3 months afterward and you should see your powder. I'm about to finally kick off my reloading adventure. Got 5,000 pieces of 5.56 brass that need cut and sized for .300 blackout. Got my work cut out for me. But going all 220gr subs.

Now waiting for my next tax stamp to come in.

tvfreakazoid · 02-19-2015, 10:51 PM

Quote:

Originally Posted by Tigger

Wait for this next scare to blow over. Give it another 2-3 months afterward and you should see your powder. I'm about to finally kick off my reloading adventure. Got 5,000 pieces of 5.56 brass that need cut and sized for .300 blackout. Got my work cut out for me. But going all 220gr subs.

Now waiting for my next tax stamp to come in.

How much did u pay for 5k .223 brass

synolimit · 02-20-2015, 12:43 AM

Quote:

Originally Posted by Tigger

Wait for this next scare to blow over. Give it another 2-3 months afterward and you should see your powder. I'm about to finally kick off my reloading adventure. Got 5,000 pieces of 5.56 brass that need cut and sized for .300 blackout. Got my work cut out for me. But going all 220gr subs.

Now waiting for my next tax stamp to come in.

What powder? I like AA2230 for my Hornady 68gr BTHP's. Probably can't use that on a 300BK though.

Tigger · 02-20-2015, 06:28 AM

Quote:

Originally Posted by tvfreakazoid

How much did u pay for 5k .223 brass

Free courtesy of four years of weapons training/qualification in the Navy. And that's just what I could grab and carry a couple of pockets full at a time. I wasn't the only one that collected brass either so I had to share. Also have 200 some odd cases of .50 to reload.

Rusty · 02-20-2015, 07:27 AM

Quote:

Originally Posted by Scott@Synergy

What powder? I like AA2230 for my Hornady 68gr BTHP's. Probably can't use that on a 300BK though.

ARComp or TAC are great powders for the .223. That's why I bought 8lbs each. I'm shooting the Sierra 69gr Match or the 75gr Hornady Match out of my AR15. Also both powders will work with the .308 AR's.

Chuy · 02-20-2015, 11:00 AM

My SOCOM II- sold the EOTech, debating on putting a 1-6x scope. Kimber TLE/ RL II 1911- friend of the family is a tattoo artist and asked him to make me some grips.

tvfreakazoid · 02-20-2015, 11:41 AM

I know I'm not suppose to get political on here but its firearms related . No discussion needed.
I got this from military arms channel aka MAC from a Facebook post.
http://savem855.com/

Tigger · 02-20-2015, 05:19 PM

Quote:

Originally Posted by Chuy

My SOCOM II- sold the EOTech, debating on putting a 1-6x scope. Kimber TLE/ RL II 1911- friend of the family is a tattoo artist and asked him to make me some grips.

How do you like that Kimber? Been debating on a 1911 for years. I'd love a Wilson Combat. But I can get a Springfield or Kimber, plus two optics and some other accessories before I hit the price of a Wilson.

jwick · 02-20-2015, 05:46 PM

Quote:

Originally Posted by Tigger

How do you like that Kimber? Been debating on a 1911 for years. I'd love a Wilson Combat. But I can get a Springfield or Kimber, plus two optics and some other accessories before I hit the price of a Wilson.

1911 is good. I shot many both off the shelf and custom. Kimber makes a good gun. So does Colt if you get the gold. S&W are nice too. Of the customs I recommend Clarke or Baer

synolimit · 02-20-2015, 09:56 PM

Quote:

Originally Posted by Nismo89

in terms of Barrett yea but with the same accuracy yes, the gun itself was $1,550 ( with the H & S precision stock)... the scope is a Vortex PST 6x30x50 tactical Scope with MOA redial ( $1,100 ) so in total so far, total investment is around $2,600 plan to add a bipod as well.

and like I said before......

$2,600 vs $9-10k Barrett, minus a scope for it.... but with the same accuracy as the Barrett and ALOT lighter

the Savage 110 FCP 338 Lapua Magnum is a bargain

nice, looks like the wife will get her wish then.

02-18-2015, 08:52 AM	#3903 (permalink)
Meulen A True Z Fanatic Join Date: Aug 2013 Location: Romeoville, IL Posts: 1,093 Drives: 2010 370z 40th Rep Power: 3390	New carry piece picked up last night after some trigger work. Gonna get some trijicon HDs for it next and maybe a cerakote Nismo89 likes this. __________________ Follow my build thread here: Meulens Build Journal

02-20-2015, 11:00 AM	#3911 (permalink)
Chuy Enthusiast Member Join Date: Apr 2010 Location: Colorado Springs Posts: 474 Drives: 2015 NISMO Rep Power: 16	My SOCOM II- sold the EOTech, debating on putting a 1-6x scope. Kimber TLE/ RL II 1911- friend of the family is a tattoo artist and asked him to make me some grips. __________________ Miko 2015 Nismo Tech: nothing RIP Ginger 2009 370Z Sport Touring Last edited by Chuy; 03-31-2015 at 01:42 PM.

02-20-2015, 11:41 AM	#3912 (permalink)
tvfreakazoid A True Z Fanatic Join Date: Jan 2009 Location: kommie kali Posts: 1,238 Drives: 2015 Audi S5; 6spd. Rep Power: 10325	I know I'm not suppose to get political on here but its firearms related . No discussion needed. I got this from military arms channel aka MAC from a Facebook post. http://savem855.com/ __________________ Mudders milk

02-17-2015, 04:09 PM	#3902 (permalink)
370zseth Enthusiast Member Join Date: Feb 2014 Location: Palm Coast/Daytona-FL Posts: 319 Drives: 12 370Z Rep Power: 25	Price of ammo any more makes it almost impossible outside of work.