Anyone here into firearms?

Rooster89 · 01-30-2013, 02:19 PM

Rooster presents your gun porn for the day

ImportConvert · 01-30-2013, 06:24 PM

Quote:

Originally Posted by UNKNOWN_370

Oh well... I do. But i'm interested in
a. eventually running suppressed I run suppressed almost all the time except high-volume training.
b. Don't like the idea that cleaning is IMPERATIVE after use. Who said it was? Last time I shot "a lot" it was 1600-1700 rounds during a 3-day course. I didn't do anything, just lubed it on day 1 before the course began. I cleaned it a few weeks later at home. NO lube, no wipe-downs, nothing during the course over 3 days. Ran great.
c. Don't like heat on the bolt. (don't care what DI fanboys claim either) Heat= increased wear on a vital component The bolt gets to about 10-20*F hotter in a DI gun than a piston gun after about a dozen mag-dumps (around 130*F total temp). I really don't think it's a problem. The real issue is that the gas-block in a piston gun gets hot. Very hot. As in twice as hot as on a DI AR (about 600*F compared to about 300*F). It's almost like having a suppressor under the rail. You shoot it enough and you are going to need some gloves, really awesome rail overs, to move your hand, etc. God forbid the weapon should graze your leg when you sling it. Also, if you are running a light, which you need on an HD carbine, chances are the body will be next to the gas-block, and batteries don't like heat. Sure would suck if they ruptured.
d. During these times, getting an M4 build operational takes some compromises Very true, or time. One of the two.
e. Running the Right length piston system can keep a gun fairly balanced. Has a lot to do with rail, stock, etc.
f. Don't believe the hype. Magpul fore-end handguard help increase balance and cut heat from the front. No comment, it's a personal opinion. The barrel-nut is the main thing that pulls heat out of the throat area.
g. Carrier tilt? BS and ancient. Dont get me started. That's not my issue, HK seems to have fixed it. I didn't buy a 416 because I didn't want to deal with a ton of proprietary parts and a gun that was over-gassed when suppressed. I did not see any adjustable gas-system 416's when I bought my SBR. I have heard they exist, in which case, I might consider one, but don't think it offers anything better than what I run now, just another flavor.

My .02 and experiences on it.

MacCool · 01-31-2013, 06:42 AM

Quote:

Originally Posted by UNKNOWN_370

Oh well... I do. But i'm interested in
a. eventually running suppressed
b. Don't like the idea that cleaning is IMPERATIVE after use.
c. Don't like heat on the bolt. (don't care what DI fanboys claim either) Heat= increased wear on a vital component
d. During these times, getting an M4 build operational takes some compromises
e. Running the Right length piston system can keep a gun fairly balanced.
f. Don't believe the hype. Magpul fore-end handguard help increase balance and cut heat from the front.
g. Carrier tilt? BS and ancient. Dont get me started.

Piston guns are fine. The design is a good solution to a problem that really doesn't exist, but they're a completely viable weapon system. A friend of mine actually created a line of piston guns (Huldra). I've spent a lot of time talking with him and his technical director (who is also my primary instructor). I still don't own one even though I could get one at cost any time I want. OTOH, he has a new sister line of DI guns coming out (Korstog .. http://www.facebook.com/korstogarms?ref=ts&fref=ts )

ImportConvert · 01-31-2013, 07:41 AM

Quote:

Originally Posted by MacCool

Piston guns are fine. The design is a good solution to a problem that really doesn't exist, but they're a completely viable weapon system. A friend of mine actually created a line of piston guns (Huldra). I've spent a lot of time talking with him and his technical director (who is also my primary instructor). I still don't own one even though I could get one at cost any time I want. OTOH, he has a new sister line of DI guns coming out (Korstog .. http://www.facebook.com/korstogarms?ref=ts&fref=ts )

Unless he's making his own parts 100% in-house, horrible time to come out with a new AR. That said, if he can actually get the parts to build them, I bet they sell!

ImportConvert · 01-31-2013, 10:50 AM

Doublt-tap 'em with a shovel!
DIY: Shovel AK - photo tsunami warning!

Red__Zed · 01-31-2013, 09:43 PM

Anyone have experience with one of these?

ShotLock Universal Solo Vault Safe

Obviously not perfectly secure, but I like the idea.

UNKNOWN_370 · 02-01-2013, 09:24 AM

Quote:

Originally Posted by MacCool

Piston guns are fine. The design is a good solution to a problem that really doesn't exist, but they're a completely viable weapon system. A friend of mine actually created a line of piston guns (Huldra). I've spent a lot of time talking with him and his technical director (who is also my primary instructor). I still don't own one even though I could get one at cost any time I want. OTOH, he has a new sister line of DI guns coming out (Korstog .. http://www.facebook.com/korstogarms?ref=ts&fref=ts )

Kool, you know those guys!!! In my search for parts I've ran across them. Hmmm so are you holding back on an AR kinneck????

ImportConvert · 02-01-2013, 10:00 AM

Picked this up from a pawn shop today for $399+Tax. Still had tons of factory copper-colored "lube" in it when I broke it down for cleaning. WIN!

m4a1mustang · 02-01-2013, 10:05 AM

I love my G19. I wish it wouldn't shoot me in the face, though (Gen 4). But I guess I don't mind anymore. :|

MacCool · 02-02-2013, 03:26 AM

Quote:

Originally Posted by m4a1mustang

I love my G19. I wish it wouldn't shoot me in the face, though (Gen 4). But I guess I don't mind anymore. :|

I finally was able to turn my Gen 3 Glock 19 into a functional pistol by changing the ejector to the 30274 (Gen 4 ejector) and putting in Apex' Gen 3-specific extractor and a stiffer bearing spring with original LCI bearing. It's an ok pistol now, but the PPQ has been and is a vastly superior pistol IMHO. Prior to that $70 upgrade, my Glock was not functional, with about 5 rounds out of every magazine hitting me in the forehead and about the same number ending up in my shirt pocket. It was beyond merely annoying; clearly a malfunction and one that appears to be not uncommon, judging by the number of people who post about it with varying degrees of disgust and anger.

The incidence of malfunction appears to be lower in the Gen 4 9mm Glocks, and the Apex extractors appear to fix them more reliably than the Gen 3s. Still no word that Glock has fixed or even acknowledged that their 9mm pistols have a high rate of malfunction.

MacCool · 02-02-2013, 04:14 PM

Quote:

Originally Posted by ImportConvert

Unless he's making his own parts 100% in-house, horrible time to come out with a new AR. That said, if he can actually get the parts to build them, I bet they sell!

Both brands are selling like crazy.

edub370 · 02-03-2013, 02:39 PM

Anyone found any BCG's in stock?

ImportConvert · 02-05-2013, 05:47 PM

Picked up a new toy today...

UNKNOWN_370 · 02-06-2013, 03:06 PM

Quote:

Originally Posted by ImportConvert

Picked up a new toy today...

How much?

ImportConvert · 02-07-2013, 02:28 AM

Quote:

Originally Posted by UNKNOWN_370

How much?

$5500 and half a year.

02-01-2013, 10:00 AM	#2918 (permalink)
ImportConvert A True Z Fanatic Join Date: Jun 2010 Location: SWMO Posts: 4,454 Drives: 2019 CX5 GT Reserve Rep Power: 7626	Picked this up from a pawn shop today for $399+Tax. Still had tons of factory copper-colored "lube" in it when I broke it down for cleaning. WIN! BlackZeda and DEpointfive0 like this. Last edited by ImportConvert; 02-02-2013 at 08:12 AM.

02-01-2013, 10:05 AM	#2919 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	I love my G19. I wish it wouldn't shoot me in the face, though (Gen 4). But I guess I don't mind anymore. :\| __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

02-03-2013, 02:39 PM	#2922 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 19	Anyone found any BCG's in stock? __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

02-05-2013, 05:47 PM	#2923 (permalink)
ImportConvert A True Z Fanatic Join Date: Jun 2010 Location: SWMO Posts: 4,454 Drives: 2019 CX5 GT Reserve Rep Power: 7626	Picked up a new toy today... BlackZeda likes this.

01-31-2013, 10:50 AM	#2915 (permalink)
ImportConvert A True Z Fanatic Join Date: Jun 2010 Location: SWMO Posts: 4,454 Drives: 2019 CX5 GT Reserve Rep Power: 7626	Doublt-tap 'em with a shovel! DIY: Shovel AK - photo tsunami warning!

01-31-2013, 09:43 PM	#2916 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 119	Anyone have experience with one of these? ShotLock Universal Solo Vault Safe Obviously not perfectly secure, but I like the idea.