That should be called a turkey sammich with 1000island dressing. :icon17:

:hello:

:hello:

Sun is shinning, and the high is 64F. :tup:

What is up with the crazy Mich governor? Read where she wants to shut down a pipe in the state because it is about to spring a leak. :icon14: Said that she will take all the profits from the company until they shut it down. :icon14: The company is Canadian and services Mich, Wis, and Minn.

Don't look in a mirror.

:rofl2::rofl2::rofl2::rofl2::rofl2:

Im guessing Line 5 in the great lakes.

Line has been hit, needs repairs all over and the company doesnt want to do them up to the states standards. Michigan said **** you, I swear we'll tear you a new one if you pollute the great lakes with an oil spill.

The other day I told you's that I still have some luck still left in my bucket. Well........I just got this. Looks like I just hit the jackpot. :tup: :rofl2::rofl2::rofl2::rofl2:

Good Day,
Dear partner

My
name is Mr. Maxwell Augustin. I am working with one of the prime banks in
Burkina Faso. Here in this bank existed a dormant account for many
years, which belonged to one of our late foreign customers. The amount in
this account stands at $13,300,000.00 (Thirteen Million Three Hundred
Thousand USA Dollars).

I
want a foreign account where the bank will transfer this fund. I know
you would be surprised to read this message, especially from someone
relatively unknown to you. But, do not worry yourself so much. This is a
genuine, risk free and legal business transaction.

Reply back to me urgently, if you are interested. All details shall be
sent to you once I hear from you.

Best regards,
Mr. Maxwell Augustin

I think that is the experience bucket winning again.

I was skeptical at first, but it says right in there it's legal and risk free!

Think I might reply back to him for chits and giggles. Play along with him. See how long I can drag it out before he gets pissed. :rofl2:

Day 4 of Hell week. :icon14:

Have some fun with them: https://www.419eater.com/

:iagree:Same here.:shakes head:

I'm going to find a 16 number random number generator to use on scammers. "I'm sorry, did you misenter the number? I'm reading it off my card'... :owned:

It's confirmed. I'm an idiot
 

I did a leak down test on my spare 3k mile motor out of my totaled z. All cylinders came back with zero leak down except cylinder #3. I found 70% leak down on the exhaust side. For some reason the exhaust valves weren't seating.

I decided to install my spare flywheel, trans and I bought a starter off Ebay so I could turn the motor over and see if I could get the valves to seat. They wouldn't seat cranking it by hand.

Filled her up with oil and cranked it for a few minutes. Got #3 cylinder back up to 50% leakdown. Since I could crank the motor over I decided to do a compression test. I borrowed a compression tester and ran all cylinders. The numbers were all over the place on all cylinders. From 60 to 85 psi. WTF. The leakdown came back perfect on all cylinders except #3, how could I have low compression on all cylinders. Must be a bad gauge.

Went to HF last night and bought one of their better gauge sets. As I was watching TV I started wondering what else might cause the low numbers and then I remembered I forgot to take off the tape covering the lower intake manifold ports to keep debris out, upper manifold was removed).

Went back today, took the tape off and did a re-test. All cylinders tested between 260/265 except #3 which was 180. I let the motor crank with the starter for about 10 minutes and then tested #3 again. Came up to 265. :tup:

I'll be wearing this cap for a while

Sticky valve.

I had a Honda CB1 400 4 cylinder bike that I was restoring. It had a 4 valve head. #3 cylinder had a sticky exhaust valve. First fire it up. It would run like crap. Then all of a sudden it would clear it's self out. I used a temp gun to check the exhaust headers. #3 was low, then come up to temp. When I rebuilt the motor. I find one exhaust valve with a minor bend in it. Eyeballing it. You couldn't see it. Put the valve in a set of V blocks with a dial indicator. It had less than .005" in run-out. Put that valve in another spot, and it wouldn't fit.

be strong duude.:iagree:

we finally got some substantial rain.. yesss :rock::rock:

its gonna be a hot summer, i dont remember it being this hot this time last year...

bring it on bitches... :rock:

ssup dudes.

And tonight’s featured special “Dodge City” :tup:

55th time my elbow has opened the console... anyone else run into this.. Hahaha. While holding the shifter.. length from my hand to my elbow is perfectly perpendicular to the button. So if i rest my arm, pow... opens up

kin folk?

you up in here kin folk?

Vacation in Long beach CA was awesome. Just got back yesterday. Now i'm back in Boston... thinking to myself, why do i live here.

Need to ponder about this.

You must have a short arm. :icon14:

suck it up dudde!

Fify :rofl2:

i did.. im good.:icon17:

i love it, i live in paradise.. and it gets hot here, it is what it is. :) no complaints here.

peace and love to all, and especially to my kin folk.

fify

fify, or is that

I think you should ask him to send YOU some $$, you know as a show of good faith and all.

Some funny chit in here. :rofl2: The 2 bears climbing the tree would scare me. :rofl2:

:hello: Morning Folks

Mernin'. Any painus complainus?