The New “What did you do with your Z today” (with off topic replies) XXXVI

JLarson · 05-08-2020, 12:42 PM

Quote:

Originally Posted by BettyZ

These movie tags are killing it.. '12 angry kox', 'kokpocalpyse now', 'citizen kok', 'kokraker'

Kokpocalypse now was a stroke of genius, kudos whoever you are.

bunk · 05-08-2020, 01:01 PM

James bondage

bunk · 05-08-2020, 01:03 PM

Dang it, tags are full

James Bondage - Koktopuzzy

bunk · 05-08-2020, 01:04 PM

Quote:

Originally Posted by Hotrodz

Hello my friends! Glad to see this week end. Had to terminate one of my own supervisors. Got to complete an employee misconduct investigation report today.

Sent from my SM-G965U using Tapatalk

I get the sense that where you work is like that show Scrubs! lol

BettyZ · 05-08-2020, 01:08 PM

Quote:

Originally Posted by JLarson

Kokpocalypse now was a stroke of genius, kudos whoever you are.

Zoren 370 · 05-08-2020, 01:26 PM

Quote:

Originally Posted by BettyZ

I guess people love kocks..

Nice Betty!

JARblue · 05-08-2020, 01:36 PM

Quote:

Originally Posted by jwick

Mine has a switch on top of it if i don’t want hammer.

lol mine does too silly

Rather than have to buy a bunch of new drill bits for sds-plus, I was looking to purchase an adapter. Was looking at these two - the difference is a keyless vs keyed chuck on the adapter.

https://www.homedepot.com/p/Bosch-1-...-203285118-_-N

https://www.homedepot.com/p/Milwauke...1370/202905997

I just bought both

Quote:

Originally Posted by jwick

Leave it outside for 3-4 days

This is what I was thinking. I'm going to unpack the wine immediately regardless. So I'll just leave the box out back as long as I know it's not gonna rain.

Hotrodz · 05-08-2020, 01:41 PM

Quote:

Originally Posted by jwick

Ouch. How do you misconduct at home?

We are still working as behavioral health is an essential business. Hell I am going to need some help after the nonsense and drinking only helps so much.

And in the time of my last posting I have another termination to complete in 20 minutes and a HIPAA privacy violation to deal with (another misconduct investigation). Ugg!!!

Sent from my SM-G965U using Tapatalk

Hotrodz · 05-08-2020, 01:43 PM

Quote:

Originally Posted by Zoren 370

I usually right a short and simple investigation report...,He is an Azzhole period!

Dismissal approved!

In some cases that happens!

Sent from my SM-G965U using Tapatalk

Hotrodz · 05-08-2020, 01:45 PM

Quote:

Originally Posted by Spooler

That sucks. My workload just increased again. The stress is starting to be overwhelming working from home. I have an additional trainee that was added to my workload.

I hear ya in times like these it is easier to do the work yourself.

Sent from my SM-G965U using Tapatalk

Hotrodz · 05-08-2020, 01:48 PM

Quote:

Originally Posted by bunk

I get the sense that where you work is like that show Scrubs! lol

LMAO, at least that show is funny. You always have 10% of your workforce that is either stupid, lazy or evil. Some are a combination of those and a few all of them.

Sent from my SM-G965U using Tapatalk

JLarson · 05-08-2020, 01:58 PM

Quote:

Originally Posted by Hotrodz

LMAO, at least that show is funny. You always have 10% of your workforce that is either stupid, lazy or evil. Some are a combination of those and a few all of them.

Sent from my SM-G965U using Tapatalk

I've heard it said that people are usually either Lazy or Industrious; and Smart or Stupid. Ideally, in a business, your best workers are Lazy and Smart - everything they do needs to be done, or they wouldn't bother. Industrious and Smart is also acceptable. The worst combination is Industrious and Stupid, because they are work creators for everyone else! At least lazy stupid people don't do anything at all.

Spooler · 05-08-2020, 02:10 PM

Quote:

Originally Posted by JLarson

The worst combination is Industrious and Stupid, because they are work creators for everyone else!

Good lord I have a few of those. Drives me crazy. Got a new batch right now we will be figuring out where they fall.

Leingod · 05-08-2020, 02:21 PM

Quote:

Originally Posted by bunk

ahhh... no wonder I didnt see any mention of that command. The pointers indicating a previous mailbox in existance and reverting back makes sense. MS failsafe that created a fail.

Let me know if it works, Im pretty curious.

SO that command does run. But it doesn't make any notable changes to the settings of the cloud mailbox. Makes no sense to me. I do have a solution though and should probably make a post about it somewhere online because I very well might be the first person in the world to have done this.

What i did was first disable the on-prem mailbox. I also made sure to ignore any legalholds and set PS to permanently disable just the mailbox.

I then enabled the remote mailbox as well as the remoteroutingaddress for the cloud account.

I then ran get-mailbox commands from both on-prem and Online to do a stare and compare and see what difference were between a working users account and the new remote mailbox account.

I had to make a single change to our default MDM policy for the new remote mailbox.

I then exported a PST of the on-prem disabled mailbox.

Looking in Exchange, I could confirm the mailbox is now pointing towards the cloud and I can confirm from EAC that the mailbox is migrated properly.

I then had to re-add all known SMTP aliases to the Exchange profile and perform a delta sync within AD Connect to get the names to begin appearing for the cloud mailbox.

This allowed for proper mailflow again for the users account.

JARblue · 05-08-2020, 02:56 PM

Went by Austin Z Clinic today. Several 280s in the lot in line for work. One getting a complete A/C overhaul that'll take several days. Then he's out for a few days. So we've planned to coordinate at the end of the month to get my Z in for work first thing in June.

Still need to hash out a bit more on the exact scope - I'm just trying to minimize any duplicate labor costs. But the number of parts I have is really making that difficult lol. Each part is like well while we're in there... might take a little extra work... oh then if we do that we should do this cause it's just a little extra work... and if we do that then this. It's like this crazy Venn diagram of labor costs in my head

05-08-2020, 01:01 PM	#5597 (permalink)
bunk A True Z Fanatic Join Date: Mar 2018 Location: Southern California Posts: 4,077 Drives: 2010 370z Roadster Rep Power: 2684370	James bondage Rusty, old guy and redondoaveb like this. __________________ -Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace

05-08-2020, 01:03 PM	#5598 (permalink)
bunk A True Z Fanatic Join Date: Mar 2018 Location: Southern California Posts: 4,077 Drives: 2010 370z Roadster Rep Power: 2684370	Dang it, tags are full James Bondage - Koktopuzzy JARblue, Rusty, Zoren 370 and 6 others like this. __________________ -Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace

05-08-2020, 02:56 PM	#5610 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Went by Austin Z Clinic today. Several 280s in the lot in line for work. One getting a complete A/C overhaul that'll take several days. Then he's out for a few days. So we've planned to coordinate at the end of the month to get my Z in for work first thing in June. Still need to hash out a bit more on the exact scope - I'm just trying to minimize any duplicate labor costs. But the number of parts I have is really making that difficult lol. Each part is like well while we're in there... might take a little extra work... oh then if we do that we should do this cause it's just a little extra work... and if we do that then this. It's like this crazy Venn diagram of labor costs in my head God-Speed, Rusty, Hotrodz and 5 others like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) Cooking Edition	Leingod	The Lounge (Off Topic)	319	09-28-2021 10:10 PM
The New “What did you do with your Z today” (with off topic replies) XXXV	Spoiler	The Lounge (Off Topic)	9999	04-08-2020 08:47 PM
The New “What did you do with your Z today” (with off topic replies) XXXIV	Spoiler	The Lounge (Off Topic)	9999	01-24-2020 05:42 PM
The New "What did you do with your Z today" (with off topic replies) XXII	eastwest2300	The Lounge (Off Topic)	10001	04-05-2016 08:15 PM