The New "What did you do with your Z today" (with off topic replies) XXIX

JLarson · 05-23-2018, 11:46 AM

Quote:

Originally Posted by madwi

Our shop was in a rough neighborhood and shootings happened fairly often in the area. We had made a new prototype gun that was going to be used for trajectory computations that the big guns on the ships would be calibrated to. It used these big tracer rounds and we worked night shift... naturally we decided it was a great idea to test it out.

There were cops flooding the area in mere minutes and everyone was just chilling by their machines like nothing happened while the foreman talked to them. He just walked by everyone and said dont even think of stepping a toe outside until your shift is over.

That's hilarious! I knew a guy who worked at the Boeing plant on 291 outside Philly. He and a few of the other machinists fabricated a cannon, and fired stuff from one hangar to the other. Now, there are no machinists at Boeing

Leingod · 05-23-2018, 12:28 PM

buffalo chicken wrap and pita chips for lunch.

StevenSlice · 05-23-2018, 01:05 PM

Getting sick. Got a massive headache and my throat is killing me.

Just want to go home lol

onzedge · 05-23-2018, 02:03 PM

Be careful with those Mustangs, boys...

Bad language so be careful...

BoneZ · 05-23-2018, 02:05 PM

Quote:

Originally Posted by Leingod

Yea. You'll be fine. My Swifts lowered the car drastically compared to Madwis and I've had 2 alignments since last year. Both done on hunter models without issues. If you're doing springs, just doe the toe bolts and Camber arms as well. Don't half are it like me.

Definitely do it right for sure. This is a dd. So... just the bolts and arms are all I need?

eastwest2300 · 05-23-2018, 02:42 PM

Quote:

Originally Posted by BoneZ

Sup eDubZ

Leingod · 05-23-2018, 02:56 PM

Apparently both cars passed inspection. Shop never called me. I had to call them. What is it with my luck lately..... sheesh

BoneZ · 05-23-2018, 02:59 PM

So if I put all these Springs and crap on here, do these cars have any idiosyncrasies that I need to know about or is it a pretty straightforward install?

madwi · 05-23-2018, 03:15 PM

Quote:

Originally Posted by BoneZ

So if I put all these Springs and crap on here, do these cars have any idiosyncrasies that I need to know about or is it a pretty straightforward install?

Very easy to do and the setup is dead simple to work on.

BoneZ · 05-23-2018, 03:22 PM

Quote:

Originally Posted by madwi

Very easy to do and the setup is dead simple to work on.

Cool. When I did the Camaro, there was this one bolt that was a pita for nearly everyone.

JARblue · 05-23-2018, 03:40 PM

So the Accord loaner I got basically crapped out in San Marcos this morning

850 miles on the odometer and every single warning lamp came on. Throttle cut to what felt like 10% meant it wasn't safe to even merge onto the highway. Dealer wouldn't return my phone calls when I tried to reach them, so I drove back to Austin on the frontage road wherever I could and put my flashers on the few times I had to enter the highway.

BoneZ · 05-23-2018, 03:53 PM

Quote:

Originally Posted by madwi

Very easy to do and the setup is dead simple to work on.

Dizzamn... I just started looking up parts. Just how much does it cost to lower this thing an inch?

Leingod · 05-23-2018, 05:04 PM

Quote:

Originally Posted by BoneZ

Dizzamn... I just started looking up parts. Just how much does it cost to lower this thing an inch?

Rough costs.300 for springs, 150 for arms, 30 for bolts.

Rusty · 05-23-2018, 05:15 PM

Quote:

Originally Posted by JLarson

That's hilarious! I knew a guy who worked at the Boeing plant on 291 outside Philly. He and a few of the other machinists fabricated a cannon, and fired stuff from one hangar to the other. Now, there are no machinists at Boeing

The shop I worked at was next to a river. If we worked the weekend. Which was most of the time. We all had made potato guns. And we used oxy and acetylene to power it. At lunch time. We would sit in the parking lot and fire big potatoes at the boats on the river.

BoneZ · 05-23-2018, 05:26 PM

Quote:

Originally Posted by Leingod

Rough costs.300 for springs, 150 for arms, 30 for bolts.

Oh... that's not bad. I must have been looking at the wrong stuff. What should I get?

05-23-2018, 12:28 PM	#2342 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,053 Drives: In Circles Rep Power: 2684396	buffalo chicken wrap and pita chips for lunch. madwi and StevenSlice like this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

05-23-2018, 01:05 PM	#2343 (permalink)
StevenSlice Track Member Join Date: Jun 2017 Location: Lompoc, CA Age: 26 Posts: 502 Drives: Like an idiot Rep Power: 46198	Getting sick. Got a massive headache and my throat is killing me. Just want to go home lol __________________ Kansei Corsa \| Endless \| Winmax \| Hotchkis \| ISR Performance \| SPL Parts \| Voodoo13 \|Sabelt \| PowerTrix \| Corner 3 \|

05-23-2018, 02:03 PM	#2344 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 63 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684736	Be careful with those Mustangs, boys... Bad language so be careful... __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

05-23-2018, 02:56 PM	#2347 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,053 Drives: In Circles Rep Power: 2684396	Apparently both cars passed inspection. Shop never called me. I had to call them. What is it with my luck lately..... sheesh __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

05-23-2018, 02:59 PM	#2348 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,295 Drives: 2012 Silver Thang Rep Power: 2684381	So if I put all these Springs and crap on here, do these cars have any idiosyncrasies that I need to know about or is it a pretty straightforward install? __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

05-23-2018, 03:40 PM	#2351 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	So the Accord loaner I got basically crapped out in San Marcos this morning 850 miles on the odometer and every single warning lamp came on. Throttle cut to what felt like 10% meant it wasn't safe to even merge onto the highway. Dealer wouldn't return my phone calls when I tried to reach them, so I drove back to Austin on the frontage road wherever I could and put my flashers on the few times I had to enter the highway. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) XXVIII	JARblue	The Lounge (Off Topic)	10014	04-26-2018 10:07 AM
The New "What did you do with your Z today" (with off topic replies) XXVII	JARblue	The Lounge (Off Topic)	9999	11-26-2017 07:08 AM
The New "What did you do with your Z today" (with off topic replies) XXVI	JARblue	The Lounge (Off Topic)	10020	04-23-2017 11:37 AM
The New "What did you do with your Z today" (with off topic replies) XXIII	eastwest2300	The Lounge (Off Topic)	10001	06-23-2016 09:21 AM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM