Anyone fabricated their own Titanium CAI yet?

GEMu · 01-17-2014, 08:14 AM

We need to thanks IMPUL then
Here in Thailand with 30-40C and 80percent humidity
350whp is A LOT, this stock Nismo is 280whp on Dynojet
So with all this set up it add up 70whp, not bad at all for me.
Sad thing is the bloody IMPUL throattle bodies are so expensive.

Its good to see how u guys tune and do things here tho.

Chuck33079 · 01-17-2014, 08:19 AM

Quote:

Originally Posted by GEMu

We need to thanks IMPUL then
Here in Thailand with 30-40C and 80percent humidity
350whp is A LOT, this stock Nismo is 280whp on Dynojet
So with all this set up it add up 70whp, not bad at all for me.
Sad thing is the bloody IMPUL throattle bodies are so expensive.

Its good to see how u guys tune and do things here tho.

That's low for a Nismo. That's about where a normal Z dynos stock. I'd love to know what kind of correction factor was used on the dyno.

The throttle bodies are just larget than stock, right? Was a larger intake fabricated to match? Was VVEL touched at all?

DEpointfive0 · 01-17-2014, 08:25 AM

Quote:

Originally Posted by Chuck33079

That's low for a Nismo. That's about where a normal Z dynos stock. I'd love to know what kind of correction factor was used on the dyno.

The throttle bodies are just larget than stock, right? Was a larger intake fabricated to match? Was VVEL touched at all?

Not that low, maybe the lower end

And why are we hammering this guy? It was his friend's car, lol

Chuck33079 · 01-17-2014, 08:30 AM

Quote:

Originally Posted by DEpointfive0

Not that low, maybe the lower end

And why are we hammering this guy? It was his friend's car, lol

Because I'm legitimately curious if there's that much to be gained by opening up the throttle bodies? Those IMPUL ones cost a mint, so it would be nice to know they work before someone shells out the coin to try it out.

DEpointfive0 · 01-17-2014, 08:32 AM

Quote:

Originally Posted by Chuck33079

Because I'm legitimately curious if there's that much to be gained by opening up the throttle bodies? Those IMPUL ones cost a mint, so it would be nice to know they work before someone shells out the coin to try it out.

Fair enough. My boy AZSpeng will be making some soon

GEMu · 01-17-2014, 08:47 AM

hammering at me? don't feel a thing guys. hahahaha
Most of the data on dyno are undocumented, but this car was on a front page of national tuning mag year ago or so, going to check on that if I can find you guys more info.

For me just simple bolt ons are enough, these freaking expensive parts make too little different, get a 370Z HiRev magazine and you know there are a lot more BS parts and gain you nothing and cost like quarter a million yen

Eclipz · 01-17-2014, 10:19 AM

Titanium CAI would look really nice in the engine bay

GEMu · 01-17-2014, 11:23 AM

Well I did talk about baseline, scroll up
Yup, VHR head. We did plenty of piggy back and stand alone here with that head.

edit, its just F Con

plus, I kinda surprise that you guys think its a BS with 350whp(OK I know I dont have dyno sheet),
but it just 15-20whp more of what you guys achieved with full bolt ons. This thing has straight exhaust, meaning NO any muffler from
headers which will gain maximum hi end and lost early and mid power and back pressure, along with cams and TBs that cost a small fortune
with a 95(you guys running 91 ?).

Megan370z · 01-17-2014, 11:36 AM

Quote:

Originally Posted by GEMu

Well I did talk about baseline, scroll up
Yup, VHR head. We did plenty of piggy back and stand alone here with that head.

edit, its just F Con

plus, I kinda surprise that you guys think its a BS with 350whp(OK I know I dont have dyno sheet),
but it just 15-20whp more of what you guys achieved with full bolt ons. This thing has straight exhaust, meaning NO any muffler from
headers which will gain maximum hi end and lost early and mid power and back pressure, along with cams and TBs that cost a small fortune
with a 95(you guys running 91 ?).

I feel you as there has been quite a few on here that didnt beleive in my result as well.. and only on 91 !

To bad I blew the VHR engine because there is even more to be gained.

juld0zer · 01-17-2014, 11:46 AM

what do you guys do in thailand to deal with the all year round high ambient air temps?

GEMu · 01-17-2014, 12:11 PM

Quote:

Originally Posted by juld0zer

what do you guys do in thailand to deal with the all year round high ambient air temps?

We are 10cm over the sea so that compensate a bit.

01-17-2014, 11:23 AM	#8 (permalink)
GEMu Base Member Join Date: Oct 2013 Location: Bangkok Posts: 38 Drives: 370Z Ducati999 Rep Power: 13	Well I did talk about baseline, scroll up Yup, VHR head. We did plenty of piggy back and stand alone here with that head. edit, its just F Con plus, I kinda surprise that you guys think its a BS with 350whp(OK I know I dont have dyno sheet), but it just 15-20whp more of what you guys achieved with full bolt ons. This thing has straight exhaust, meaning NO any muffler from headers which will gain maximum hi end and lost early and mid power and back pressure, along with cams and TBs that cost a small fortune with a 95(you guys running 91 ?). Last edited by GEMu; 01-17-2014 at 11:32 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Top Speed Titanium CBE!	cycy89	Intake/Exhaust	6	02-19-2013 11:46 PM
NEW Titanium Lugs!!!	bullitt5897	Wheels & Tires	114	05-12-2011 07:17 AM
Titanium Engine Bay Fastener Kits! 100% Real Titanium! From DressUpBolts.com	DressUpBolts	Body Interior/Exterior	34	05-10-2011 08:41 AM
What do u think abt Titanium+stainless cat	OhYeah	Intake/Exhaust	1	09-03-2010 03:19 PM
If you like Titanium...	370Ztune	Nissan 370Z General Discussions	3	08-10-2010 07:40 PM

01-17-2014, 08:47 AM	#6 (permalink)
GEMu Base Member Join Date: Oct 2013 Location: Bangkok Posts: 38 Drives: 370Z Ducati999 Rep Power: 13	hammering at me? don't feel a thing guys. hahahaha Most of the data on dyno are undocumented, but this car was on a front page of national tuning mag year ago or so, going to check on that if I can find you guys more info. For me just simple bolt ons are enough, these freaking expensive parts make too little different, get a 370Z HiRev magazine and you know there are a lot more BS parts and gain you nothing and cost like quarter a million yen

01-17-2014, 10:19 AM	#7 (permalink)
Eclipz Enthusiast Member Join Date: Dec 2013 Location: Tampa Posts: 360 Drives: 06 Eclipse GS Rep Power: 13	Titanium CAI would look really nice in the engine bay

01-17-2014, 11:46 AM	#10 (permalink)
juld0zer Enthusiast Member Join Date: Nov 2012 Location: Sydney Posts: 428 Drives: 11 Nissan 370Z MB M6 Rep Power: 140	what do you guys do in thailand to deal with the all year round high ambient air temps?